Abstract
A wirelessly controlled self-powered multi-functional system that uses a relay to change from harvesting air flow energy to sensing its speed and vice versa is developed. Both functions are achieved through the use of the same micro-wind turbine. When the relay is in the on position, the turbine harvests the air’s kinetic energy to charge a battery. When a measurement is needed, the relay is turned off wirelessly and energy harvesting is shut down. The charged battery is then used to turn on a wirelessly controlled single board computer that controls a data acquisition system to sense the rotational speed of the turbine, which is proportional to the air speed. The system is tested and results from a broad range of wind speeds are presented and analyzed. The system presented here can be used for autonomous sensing of air speed without a need for wired connections to an external power source or batteries that need to be regularly replaced, which makes it ideal for integration within the Internet of things as a platform for a smart building system.
Similar content being viewed by others
References
Bibo A, Daqaq MF (2014) On the optimal performance and universal design curves of galloping energy harvesters. Appl Phys Lett 104(2):023901. https://doi.org/10.1063/1.4861599
Erturk A, Vieira WGR, M CD Jr, Inman DJ (2010) On the energy harvesting potential of piezoaeroelastic systems. Appl Phys Lett 96(18):184103. https://doi.org/10.1063/1.3427405
Fu H, Yeatman EM (2015) A miniaturized piezoelectric turbine with self-regulation for increased air speed range. Appl Phys Lett 107(24):243905
Grouthier C, Michelin S, Bourguet R, Modarres-Sadeghi Y, De Langre E (2014) On the efficiency of energy harvesting using vortex-induced vibrations of cables. J Fluids Struct 49:427
Kwon SD (2010) A t-shaped piezoelectric cantilever for fluid energy harvesting. Appl Phys Lett 97(16):164102. https://doi.org/10.1063/1.3503609
Liu H, Zhang S, Kathiresan R, Kobayashi T, Lee C (2012) Development of piezoelectric microcantilever flow sensor with wind-driven energy harvesting capability. Appl Phys Lett 100(22):223905
Mehmood A, Abdelkefi A, Hajj M, Nayfeh A, Akhtar I, Nuhait A (2013) Piezoelectric energy harvesting from vortex-induced vibrations of circular cylinder. J Sound Vib 332(19):4656
Myers R, Vickers M, Kim H, Priya S (2007) Small scale windmill. Appl Phys Lett 90(5):054106
Rancourt D, Tabesh A, Fréchette LG (2007) In: Proc. PowerMEMS, vol. 20079
Zakaria MY, Al-Haik MY, Hajj MR (2015) Experimental analysis of energy harvesting from self-induced flutter of a composite beam. Appl Phys Lett 107(2):023901. https://doi.org/10.1063/1.4926876
Zakaria MY, Pereira DA, Hajj MR (2015) Experimental investigation and performance modeling of centimeter-scale micro-wind turbine energy harvesters. J Wind Eng Ind Aerodyn 147:58
Acknowledgements
Muhammad Hajj acknowledges the support of the Center for Energy Harvesting Materials and Systems and the National Science Foundation under Grant 1035042.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Alrowaijeh, J.S., Hajj, M.R. Wirelessly controlled harvester/sensor of air speed. Multiscale and Multidiscip. Model. Exp. and Des. 1, 97–101 (2018). https://doi.org/10.1007/s41939-018-0010-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41939-018-0010-3