References
Vlot, A.; Gunnink, J.: Fibre Metal Laminates. Kluwer Academic Publishers, 2001
Stefaniak, D.: Improving residual strength of unidirectionally reinforced plastic laminates by metal layering. Dissertation, Technische Universität Braunschweig, 2017
Kolesnikov, B.; Herbeck, L.; Fink, F.: CFRP/titanium hybrid material for improving composite bolted joints. In: Composite Structures, 83 (2008), pp. 368–380
Petersen, E.; Stefaniak, D.; Hühne, C.: Investigation of the transition zone for locally metal reinforced joining areas. ICCS18 - 18th International Conference on Composite Structures, Lisbon, Portugal, 2015
Lopes, J.; Reis, L.; Stefaniak, D.; Freitas, M.; Camanho, P. P.: Mechanical characterisation of CFRP-steel hybrid composites. Int. J. Automotive Composites, Vol. 2, No. 2 (2016), pp.139–154
Düring, D.; Weiß, L.; Stefaniak, D.; Jordan, N.; Hühne, C.: Low-velocity impact response of composite laminates with steel and elastomer protective layer. Composite Structures, 134 (2015), pp. 18–26
Stefaniak, D.; Kappel, E.; Kolotylo, M.; Hühne, C.: Experimental identification of sources and mechanisms inducing residual stresses in multilayered fibre-metal-laminates. Euro Hybrid Materials and Structures, Stade, Germany, 2014
Prussak, R.; Stefaniak, D.; Hühne, C.; Sinapius, M.: Residual Stresses in Intrinsic UD-CFRP-Steel-Laminates - Experimental Determination, Identification of Sources, Effects and Modification Approaches. Materials Science Forum. 825–826 (2015), pp. 369–376
Stefaniak, D.; Kappel, E.; Kolesnikov, B.; Hühne, C.: Improving the mechanical performance of unidirectional CFRP by metal-hybridization. ECCM15 - 15th European Conference on Composite Materials, Venice, Italy, 2012
Prussak, R.; Stefaniak, D.; Hühne, C.; Sinapius, M.: Experimental investigations on residual stress during the fabrication of intrinsic CFRP-steel laminates. Euro Hybrid Materials and Structures, Kaiserslautern, Germany, 2016
Thanks
The presented findings were essentially gained during the project no. 8 of the ’Schwerpunktprogramm SPP1712’ funded by the ’Deutsche Forschungsgemeinschaft’. The authors like to thank for funding and support. Another word of thanks is addressed to Salzgitter Mannesmann Forschung for providing material.
Author information
Authors and Affiliations
About this article
Cite this article
Stefaniak, D., Prussak, R. & Weiß, L. Specific challenges in the application of fibre-metal laminates. Lightweight des worldw 10, 20–25 (2017). https://doi.org/10.1007/s41777-017-0042-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41777-017-0042-0