Abstract
Aim
This paper aims to perform a descriptive analysis by reviewing publications concerned with the production of carbon dioxide (CO2) lasers and their technological advancement, optical properties, and parameters in relation to clinical applications in dentistry.
Methods
This review was based on the literature search in Scopus, Google Scholar, and PubMed in English. The last search was made in December 2017 and there was no publication-year limit.
Results
: The 10,600-nm CO2 laser is a readily available dental laser on the market. It enables performance of a bloodless surgical procedure and reduces post-operative discomfort in soft tissue dental surgery. Due to the advancement of technology, CO2 lasers with short pulse duration and high peak power are available. This new-parameter CO2 laser causes less collateral thermal damage to soft tissue than conventional lasers with continuous wave mode. Recently, a 9,300-nm wavelength CO2 laser has been introduced for clinical use in dental hard tissue removal. These developments make CO2 lasers fitting for dental hard tissue preparation.
Conclusions
The 10,600-nm CO2 laser is widely accepted for soft tissue surgery applications. Although CO2 lasers have been studied extensively in caries prevention, they have not been applied in clinical practice. The optical properties of 9,300-nm and 9,600-nm CO2 wavelengths are suitable for dental hard tissue treatment. Technological advancements in software and laser parameters will aid in new clinical application and technique development. CO2 lasers as hard tissue lasers will become more popular and more widely accessible to researchers and clinicians.
Similar content being viewed by others
References
Chung H, Dai T, Sharma SK, Huang YY, Carroll JD, Hamblin MR (2012) The nuts and bolts of low-level laser (light) therapy. Ann Biomed Eng 40:516–533
Verma SK, Maheshwari S, Singh RK et al (2012) Laser in dentistry: an innovative tool in modern dental practice. Natl J Maxillofac Surg 3:124–132
Nasim H, Jamil Y (2014) Diode lasers: from laboratory to industry. Opt Laser Technol 56:211–222
Fornaini C, Merigo E, Rocca J et al (2016) 450 nm blue laser and oral surgery: preliminary ex vivo study. J Contemp Dent Pract 17:795–800
Braun A, Berthold M, Frankenberger R (2015) The 445-nm semiconductor laser in dentistry—introduction of a new wavelength. Quintessenz 66:205–211
Sarver DM, Yanosky M (2005) Principles of cosmetic dentistry in orthodontics: part 2. Soft tissue laser technology and cosmetic gingival contouring. Techno Bytes 127:85–90
Mizutani K, Aoki A, Coluzzi D et al (2016) Lasers in minimally invasive periodontal and peri-implant therapy. Periodontol 2000(71):185–212
Merigo E, Clini F, Fornaini C, Oppici A, Paties C, Zangrandi A, Fontana M, Rocca JP, Meleti M, Manfredi M, Cella L, Vescovi P (2013) Laser-assisted surgery with different wavelengths: a preliminary ex vivo study on thermal increase and histological evaluation. Lasers Med Sci 28:497–504
Malmstrom HS, McCormack SM, Fried D et al (2001) Effect of CO2 laser on pulpal temperature and surface morphology: an in vitro study. J Dent 29:521–529
Watanabe I, Lopes RA, Brugnera A, Katayama AY, Gardini AE (1996) Effect of CO2 laser on class V cavities of human molar teeth under a scanning electron microscope. Braz Dent J 7:27–31
Friedman S, Liu M, Izawa T et al (1992) Effects of CO2 laser irradiation on pulpal blood flow. Proc Finn Dent Soc 88(Suppl 1):167–171
Beaulieu AJ (1970) Transversely excited atmospheric pressure CO2 lasers. 16:504–505
Fantarella D, Kotlow L (2014) The 9.3-μm CO2 dental laser: technical development and early clinical experiences. J Laser Dent 22:10–27
Patel C (1964) Continuous-wave laser action on vibrational-rotational transitions of CO2. Phys Rev 136:1187–1193
Zuerlein MJ, Fried D, Seka WD et al (1998) Absorption coefficients of dental enamel in the infrared: a solution to a seemingly straightforward problem, Lasers in Dentistry IV, International Society for Optics and Photonics, pp: 137–146
Fried D, Zuerlein MJ, Le CQ et al (2002) Thermal and chemical modification of dentin by 9–11-μm CO2 laser pulses of 5–100-μs duration. Lasers Surg Med 31:275–282
Zuerlein MJ (1999) Interactions of IR lasers with dental hard tissues at clinically relevant wavelengths. PhD Thesis, University of California, San Francisco
McCormack SM, Fried D, Featherstone JD et al (1995) Scanning electron microscope observations of CO2 laser effects on dental enamel. J Dent Res 74:1702–1708
Fried D, Glena RE, Featherstone JD et al (1995) Multiple-pulse irradiation of dental hard tissues at CO2 laser wavelengths. Lasers Dent Int Soc Opt Photonics 2394:41–51
Fried D, Seka WD, Glena RE et al (1996) Thermal response of hard dental tissues to 9-through 11-um CO2-laser irradiation. Opt Eng 35:1976–1985
Fowler BO, Kuroda S (1986) Changes in heated and in laser-irradiated human tooth enamel and their probable effects on solubility. Calcif Tissue Int 38:197–208
Krapchev VB, Rabii CD, Harrington JA (1994) Novel CO2 laser system for hard tissue ablation. Advanced Characterization, Therapeutics, and Systems IV, International Society for Optics and Photonics, Laser Surgery, pp 341–349
Featherstone JD, Fried D (2001) Fundamental interactions of lasers with dental hard tissues. Med Laser Appl 16:181–194
Nguyen D, Chang K, Hedayatollahnajafi S et al (2011) High-speed scanning ablation of dental hard tissues with a λ= 9.3-μm CO2 laser: heat accumulation and peripheral thermal damage. J Biomed Opt 16:071410
Featherstone JD, Nelson DGA (1987) Laser effects on dental hard tissues. Adv Dent Res 1:21–26
Featherstone JD, Barrett-Vespone NA, Fried D et al (1998) CO2 laser inhibition of artificial caries-like lesion progression in dental enamel. J Dent Res 77:1397–1403
Nammour S, Nyssen-Behets C (1992) Increased resistance to artificial caries-like lesions in dentin treated with CO2 laser. Caries Res 26:170–175
Chang NN, Jew JM, Simon JC et al (2017) Influence of multi-wavelength laser irradiation of enamel and dentin surfaces at 0.355, 2.94, and 9.4 μm on surface morphology, permeability, and acid resistance. Lasers Surg Med 49:913–927
Fekrazad R, Najafi A, Mahfar R, Namdari M, Azarsina M (2017) Comparison of enamel remineralization potential after application of titanium tetra fluoride and carbon dioxide laser. Laser therapy 26:113–119
Rechmann P, Charland DA, Rechmann BM et al (2013) In-vivo occlusal caries prevention by pulsed CO2-laser and fluoride varnish treatment—a clinical pilot study. Lasers Surg Med 45:302–310
Rechmann P, Rechmann BM, Groves WH Jr et al (2016) Caries inhibition with a CO2 9.3 μm laser: an in vitro study. Lasers Surg Med 48:546–554
Le CQ, Fried D, Featherstone JD (2008) Lack of dentin acid resistance following 9.3 μm CO2 laser irradiation. Lasers in Dentistry XIV 6843: 68430J
Convissar RA, Diamond LB, Fazekas CD (1996) Laser treatment of orthodontically induced gingival hyperplasia. Gen Dent 44:47–51
Fan K, Bell PW, Fried D (2006) Rapid and conservative ablation and modification of enamel, dentin, and alveolar bone using a high repetition rate transverse excited atmospheric pressure CO2 laser operating at λ= 9.3 μm. J Biomed Optic 11:064008
Fried D, Ragadio J, Akrivou M, Featherstone JDB, Murray MW, Dickenson KM (2001) Dental hard tissue modification and removal using sealed transverse excited atmospheric-pressure lasers operating at λ= 9.6 and 10.6 μm. J Biomed Opt 6:231–238
Müllejans R, Eyrich G, Raab WM et al (2002) Cavity preparation using a superpulsed 9.6-μm CO2 laser—a histological investigation. Lasers Surg Med 30:331–336
Wigdor HA, Walsh JT, Mostafi R (2000) Effect of the CO2 laser (9.6 μm) on the dental pulp in humans, Lasers in dentistry VI, International Society for Optics and Photonics, pp: 158–164
Geraldo-Martins VR, Tanji EY, Wetter NU, Nogueira RD, Eduardo CP (2005) Intrapulpal temperature during preparation with the Er: YAG laser: an in vitro study. Photomed Laser Ther 23:182–186
Gaspar L, Kásler M, Szabó G et al (1991) Separate and combined use of Nd: YAG and carbon dioxide lasers in oral surgery. J Clin Laser Med Surg 9:381–383
Gaspar L, Szabó G (1990) Manifestation of the advantages and disadvantages of using the CO2 laser in oral surgery. J Clin Laser Med Surg 8:39–43
Fiorotti RC, Bertolin MM, Nicola JH et al (2004) Early lingual frenectomy assisted by CO2 laser helps prevention and treatment of functional alterations caused by ankyloglossia. Int J Orofac Myology 30:64–71
Pick RM, Pecaro BC, Silberman CJ (1985) The laser gingivectomy: the use of the CO2 laser for the removal of phenytoin hyperplasia. J Periodontol 56:492–496
Israel M, Cobb CM, Rossmann JA, Spencer P (1997) The effects of CO2, Nd: YAG and Er: YAG lasers with and without surface coolant on tooth root surfaces. J Clin Periodontol 24:595–602
Adams TC, Pang PK (2004) Lasers in aesthetic dentistry. Dental Clinics 48:833–860
Kopp WK, St-Hilaire H (2004) Mucosal preservation in the treatment of mucocele with CO2 laser. J Oral Maxillofac Surg 62:1559–1561
Roodenburg JLN, Panders AK, Vermey A (1991) Carbon dioxide laser surgery of oral leukoplakia. Oral Surg Oral Med Oral Pathol 71:670–674
Romanos GE, Nentwig GH (2008) Regenerative therapy of deep peri-implant infrabony defects after co2 laser implant surface decontamination. Int J Periodontics Restor Dent 28:245–255
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
This article does not contain any studies with human participants or animals performed by any of the authors.
Rights and permissions
About this article
Cite this article
Luk, K., Zhao, I.S., Gutknecht, N. et al. Use of carbon dioxide lasers in dentistry. Laser Dent Sci 3, 1–9 (2019). https://doi.org/10.1007/s41547-018-0047-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41547-018-0047-y