Abstract
Results of the testing of new refractory materials for the lining of steel ladles are reported. Refractories based on coarsely crystalline periclase (98% MgO) for the slag zone with an endurance of 55 – 60 heats and wear rate of 2.3 mm/heat were tested. For the bottom lining of the steel ladle, alumina-periclase-carbon refractories using fused or sintered alumomagnesian spinels are developed. Performance characteristics of the newly developed refractory materials are discussed.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
__________
Translated from Novye Ogneupory, No. 1, pp. 6 – 9, January, 2005.
Rights and permissions
About this article
Cite this article
Kochubeev, Y.N., Kungurtsev, V.N., Mironova, L.V. et al. A Technology for Production of Composite Refractory Materials for the Lining of Steel Ladles. Refract Ind Ceram 46, 81–84 (2005). https://doi.org/10.1007/s11148-005-0055-9
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11148-005-0055-9