The critical concentration of nitrogen in steel during its equilibrium crystallization is best defined as the concentration at which the nitrogen content of the remaining liquid steel does not exceed nitrogen’s solubility in the liquid at the given pressure and temperature. The critical nitrogen concentration is most expediently determined by means of the program Thermo-Calc. Calculated values of critical concentration obtained from the program should then be refined in practice for specific crystallization conditions.
Similar content being viewed by others
References
A. G. Svyazhin, J. Siwka, and Z. Skuza, “Bubble formation during the crystallization of high-nitrogen steels,” Metalloved. Term. Obrab. Met., No. 12, 10–12 (2000).
A. G. Svyazhin, J. Siwka, Z. Skuza, et al., “Crystallization, the cast structure, and the formation of gas blowholes in high nitrogen steels and alloys,” Inzyn. Material., No. 5, 884–887 (2001).
A. G. Svyazhin, J. Siwka, Z. Skuza, et al., “Crystallization, the cast structure, and the formation of gas blowholes in high nitrogen steels and alloys,” Trans. Indian Inst. Metals, No. 4, 183–191 (2002).
S.-H. Yang and Z.-H. Lee, “A method for predicting nitrogen gas pores in nitrogen alloying stainless steels,” J. Mat. Sci. Eng. A, 417, 307–314 (2006).
H. K. Feichtinger and G. Stein, “Melting of high nitrogen steels,” Proc. 5th Int. Conf. High Nitrogen Steels, Espoo Finland – Stockholm Sweden (1998), pp. 261–279.
R. Arola, J. Wendt, and V. Kivineva, “Gas porosity defects in duplex stainless steel castings,” ibid., pp. 297–302.
M. R. Rudolfi and O. Tassa, “Formation of nitrogen bubbles during the solidification of 16–18% Cr high nitrogen austenitic stainless steels,” J. Intermetal., No. 11, 1335–1338 (2003).
T. Sugiyama, T. Suzuki, T. Shibata, and H. Mori, “Process technology for high nitrogen steel production by pressurized induction furnace,” Proc. 2nd Int. Cong. Science and Technology of Steelmaking, IOM Communications, London (2001), pp. 437–442.
E. Y. Kolpishon, Y. I. Utochkin, and M. V. Ivanova, “HNS product quality and technology of their manufacturing,” Proc. 7th Int. Conf. High Nitrogen Steels 2004, GRIPS Media, Bad Harzburg (2004), pp. 591–596.
R. Fluch, G. Saller, S. Eglsaer, and H. Aigner, “A new cold worked superaustenitic stainless steel for application in th oil-field industry,” Proc. 9th Int. Conf. on High Nitrogen Steels, Metallurg. Soc. Press, Beijing, China (2006), pp. 290–294.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated from Metallurg, No. 11, pp. 41–46, November, 2014. Original article submitted June 16, 2014.
Rights and permissions
About this article
Cite this article
Svyazhin, A.G., Bazhenov, V.E., Kaputkina, L.M. et al. Critical Nitrogen Concentration in High-Nitrogen Steels for the Production of a Dense Ingot. Metallurgist 58, 959–966 (2015). https://doi.org/10.1007/s11015-015-0024-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-015-0024-6