Abstract
Form or friction drilling is becoming popular due to its ability to quickly form the hole with bushing on the sheet material. The formed hole is to be tapped with form tap, and thus, tapped holes on the sheet materials are used in sheet metal working processes. This process requires two separate operations of form drilling and form tapping and consumes extra time causing more cost of production. This paper proposes the design and development of combination tool, made of high-speed steel (M2) tool which combines the friction drilling and form tapping operation in a single step. The main objective of designing the combination tool is to minimize the operation time and cost of production as both operations can be performed on the same machine using a single tool. The combination tool have been designed keeping in mind polymeric sheet material and the geometry of form section and ta section decided according to the requirement. The two sections of combination tool, viz. form section and tap section used to carry out the operation in that sequence. Form section of combination tool has the geometry vis-a-vis friction drilling tool. The rotating conical tool when contacts the work piece generates the frictional heat resulting in softening of work piece material. Further advancement of tool into the work piece leads to plastic flow of material along the direction of feed which reproduces the cylindrical hole resembling cylindrical portion of form section. Tap section which is located just above the form section carries out the second sequence of operation, i. e., form tapping. Process involves the reproduction of threaded profile on the drilled holes which completes the cycle of forming and tapping the holes on the sheet materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Murti1, K.G.K., Labesh Kumar, C., Prasad, V.V.S.H., Vanaja, T.: Design and development of friction stir drilling and tapping. Int. J. Sci. Res. (IJSR)
Urbikain, G., Perez, J.M., Lopez de Lacalle, L.N., Andueza, A.: Combination of friction drilling and form tapping process on dissimilar materials for making nutless joints. J. Eng. Manuf. (27 July, 2016)
Kaya, M.T., Aktas, A., Beylergil, B., Akyildiz, H.K.: An experimental study on friction drilling of ST 12 Steel. CSME-134. E.I.C. Accession 3592
Gopal Krishna, P.V., Kishore, K.: Some investigations in friction drilling AA 6351 using high speed steel tools. APRN J. Eng. Appl. Sci. 5(3) (March 2010)
Hanumantha Rao, K., Gopichand, A., Pavan Kumar, N., Jitendra, K.: Optimization of machining parameters in friction drilling process. Int. J. Mechan. Eng. Technol. (IJMET) 8(4), 242–254 Article ID: IJMET 08 04 028 (April 2017)
Acknowledgements
The authors would like to thank Prof. H. Bagchi, Professor Emeritus, COEP, and Department of Production and Industrial Engineering, College of Engineering, Pune, for providing the necessary support to carrying the ongoing research work.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kamble, Y.G., Pantawane, P.D., Rajiv, B., Ahuja, B.B. (2020). Design and Development of Combination Tool for Drilling and Tapping Operation on PVC. In: Shunmugam, M., Kanthababu, M. (eds) Advances in Simulation, Product Design and Development. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9487-5_44
Download citation
DOI: https://doi.org/10.1007/978-981-32-9487-5_44
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9486-8
Online ISBN: 978-981-32-9487-5
eBook Packages: EngineeringEngineering (R0)