Abstract
Stretch blow moulding in manufacturing bioresorbable vascular scaffold (BVS) from poly (l-lactic acid) (PLLA) provides a biaxial deformation process of raw materials to enhance the mechanical performance. Current knowledge on the mechanical behaviour of PLLA materials in this deformation process is still lacked and trial-and-error tests are relied to develop a successful operation, causing significant waste of material and cost. Motivated by this circumstance, mechanical properties of PLLA materials were investigated by biaxial stretching test at designed strain history mimicking the stretch blow moulding process. A nonlinear viscoelastic material model, i.e. Glass-rubber model was calibrated based on the experimental data from equal biaxial (EB) and constant-width (CW) stretching tests. Material anisotropy was implemented into the original model by introducing the initial orientation factor from the extrusion process. Biaxial deformation process of PLLA materials under variable strain history was modelled by the calibrated and modified model. Modelling results exhibited good agreement with the experimental data, highlighting the potential application of material modelling in improving the understanding on stretch blow moulding of PLLA materials in the industrial manufacture.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Oberhauser, P.J., Hossainy, S., Rapoza, R.J.: Design principles and performance of bioresorbable polymeric vascular scaffolds. EuroIntervention 5, F15–F22 (2009)
Løvdal, A., Andreasen, J.W., Mikkelsen, L.P., Agersted, K., Almdal, K.: Characterization of biaxial strain of poly (l-lactide) tubes. Polym. Int. 65, 133–141 (2016)
Løvdal, A.L., Andreasen, J.W., Mikkelsen, L.P., Agersted, K., Almdal, K.: Mechanical properties of biaxially strained poly (l-lactide) tubes: Strain rate and temperature dependence. J. Appl. Polym. Sci. 134, 45192 (2017)
Nixon, J., Menary, G., Yan, S.: Free-stretch-blow investigation of poly (ethylene terephthalate) over a large process window. Int. J. Mater. Form. 10, 765–778 (2016)
Yan, S., Menary, G., Nixon, J.: A novel methodology to characterize the constitutive behaviour of polyethylene terephthalate for the stretch blow moulding process. Mech. Mater. 104, 93–106 (2017)
Zhang, X., Schneider, K., Liu, G., Chen, J., Brüning, K., Wang, D., Stamm, M.: Structure variation of tensile-deformed amorphous poly (l-lactic acid): Effects of deformation rate and strain. Polymer 52, 4141–4149 (2011)
Ou, X., Cakmak, M.: Influence of biaxial stretching mode on the crystalline texture in polylactic acid films. Polymer 49, 5344–5352 (2008)
Menary, G.H., Tan, C.W., Armstrong, C.G., Salomeia, Y., Picard, M., Billon, N., Harkin-Jones, E.M.A.: Validating injection stretch-blow molding simulation through free blow trials. Polym. Eng. Sci. 50, 1047–1057 (2010)
Nixon, J., Menary, G.H., Yan, S.: Finite element simulations of stretch-blow moulding with experimental validation over a broad process window. Int. J. Mater. Form. 10, 793–809 (2017)
Menary, G.H., Tan, C.W., Harkin-Jones, E.M.A., Armstrong, C.G., Martin, P.J.: Biaxial deformation and experimental study of PET at conditions applicable to stretch blow molding. Polym. Eng. Sci. 52, 671–688 (2012)
Adams, A.M., Buckley, C.P., Jones, D.P.: Biaxial hot-drawing of poly (ethylene terephthalate): dependence of yield stress on strain-rate ratio. Polymer 39, 5761–5763 (1998)
Buckley, C.P., Jones, D.C., Jones, D.P.: Hot-drawing of poly (ethylene terephthalate) under biaxial stress: Application of a three-dimensional glass—rubber constitutive model. Polymer 37, 2403–2414 (1996)
Buckley, C.P., Jones, D.C.: Glass-rubber constitutive model for amorphous polymers near the glass transition. Polymer 36, 3301–3312 (1995)
Wei, H., Yan, S., Goel, S., Menary, G.H.: Characterization and modelling the mechanical behaviour of poly (l-lactic acid) for the manufacture of bioresorbable vascular scaffolds by stretch blow moulding (under review)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wei, H., Menary, G., Yan, S., Buchanan, F. (2018). Experiment and Modelling on Biaxial Deformation of PLLA Materials Under Designed Strain History for Stretch Blow Moulding. In: Wang, S., Price, M., Lim, M., Jin, Y., Luo, Y., Chen, R. (eds) Recent Advances in Intelligent Manufacturing . ICSEE IMIOT 2018 2018. Communications in Computer and Information Science, vol 923. Springer, Singapore. https://doi.org/10.1007/978-981-13-2396-6_21
Download citation
DOI: https://doi.org/10.1007/978-981-13-2396-6_21
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-2395-9
Online ISBN: 978-981-13-2396-6
eBook Packages: Computer ScienceComputer Science (R0)