Abstract
This chapter summarizes the principles, governing equations, and basic algorithms related to the finite element method (FEM), which has been the most general and powerful computation tool in the engineering design and analysis since the later 1960s. The “standard” and “hierarchical” shape functions using orthogonal polynomial series are elucidated in details, based on which the algorithms with regard to the fields of permeability, temperature, and deformation are elaborated. The solution techniques particularly important for hydraulic structures related to the issues of rock EDZ, phreatic surface, concrete hydration heating, reservoir water temperature, dynamic response, are addressed. This chapter is closed with the discussion on the safety criteria of hydraulic structures.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ang AH-S, Tang WH. Probability concepts in engineering planning and design, vol. I & II. New York: Wiley; 1984.
Argyris JH, Kelsey S. Energy theorems and structural analysis. London: Butterworth Scientific Publications; 1960.
Babuška I, Szabó BA, Katz IN. The p-version of the finite element method. SIAM J Numer Anal. 1981;18(3):515–45.
Babuška I, Griebel M, Pitkäranta J. The problem of selecting the shape functions for a p-type finite element. Int J Numer Meth Eng. 1989;28(8):1891–908.
Babuška I, Henshaw WD, Oliger JE, Flaherty JE, Hopcroft JE, Tezduyar T. Modeling, mesh generation, and adaptive numerical methods for partial differential equations. New York: Springer; 1995.
Bathe KJ, Khoshgoftaar MR. Finite element free surface seepage analysis without mesh iteration. Int J Numer Anal Meth Geomech. 1979;8(3):13–22.
Bathe KJ, Wilson EL. Stability and accuracy analysis of direct integration methods. Earthquake Eng Struct Dynam. 1972;1(3):283–91.
Bednarz TE, Lei CW, Patterson JC. Unsteady natural convection induced by diurnal temperature changes in a reservoir with slowly varying bottom topography. Int J Therm Sci. 2009;48(10):1932–42.
Brown PT, Booker JR. Finite element analysis of excavation. Comput Geotech. 1985;1(3):207–20.
Cai M, Kaiser PK. Assessment of excavation damaged zone using a micromechanics model. Tunn Undergr Space Technol. 2005;20(4):301–10.
Caughey TH, Kelly MEJ. Classical normal modes in damped linear dynamic systems. J Appl Mech ASME. 1965;32(3):583–8.
Chen SH. Hydraulic structures. Berlin: Springer; 2015.
Chen SH, Wang WM, She CX, Xu MY. Unconfined seepage analysis of discontinuous rock slope. J Hydrodyn. 2000;12(3):75–86.
Chen SH, Chen SF, Shahrour I, Egger P. The feedback analysis of excavated rock slope. Rock Mech Rock Eng. 2001;34(1):39–56.
Chen SH, Qin WX, Shahrour I. Comparative study of sock slope stability analysis methods for hydropower projects. Mech Res Commun. 2007;34(1):63–8.
Chen SH, Zhang GX, Zhu YM. Thermal stresses and temperature control of concrete. In: Zhou JP, Dang LC, editors. Handbook of hydraulic structure design, vol. 5. Concrete dams (Chapter 6). Beijing: China Water Power Press; 2011a (in Chinese).
Chen YF, Hu R, Zhou CB, Li DQ, Rong G. A new parabolic variational inequality formulation of Signorini’s condition for non-steady seepage problems with complex seepage control systems. Int J Num Anal Meth Geomech. 2011b;35(9):1034–58.
Chen SH, Wang GJ, Zhou H, Wang WM, Zou LC. Evaluation of excavation-induced relaxation and its application to an arch dam foundation. Int J Numer Anal Meth Geomech. 2012;36(1):166–81.
Chen GQ, Huang RQ, Zhou H, et al. Research on progressive failure for slope using dynamic strength reduction method. Rock Soil Mech. 2013;34(4):1140–6 (in Chinese).
Chen HQ, Wu SX, Dang FN. Seismic safety of high arch dams. Beijing: Academic Press; 2015.
Cheng Z, Chen SH. Three dimensional hierarchical finite element method for hydraulic structure. J Hydraul Eng. 1999;21(12):53–8 (in Chinese).
Chilton L, Suri M. On the selection of a locking-free hp element for elasticity problems. Int J Numer Meth Eng. 1997;40(11):2045–62.
Chopra AK. Simplified earthquake of concrete gravity dam. J Struct Div ASCE. 1987;113(ST8):1688–708.
Chopra AK, Chakrabarti P. Earthquake analysis of concrete gravity dams including dam-water-foundation rock interaction. Earthquake Eng Struct Dynam. 1981;9(4):363–83.
Chung KY, Kikuchi N. Adaptive methods to solve free boundary problems of flow through porous media. Int J Num Anal Meth Geomech. 1987;11(1):17–31.
Clough RW. The finite element in plane stress analysis. J Struct Div ASCE (Proceedings of the 2nd ASCE conference on electronic computation). 1960;23:345–78.
Clough RW, Penzien J. Dynamics of structures, 3rd ed. Berkeley: Computers & Structures Inc; 2003.
Cornell CA. A probability based structural code. ACI J. 1969;66(12):974–85.
Corthésy R, Leite MH. A strain-softening numerical model of core discing and damage. Int J Rock Mech Min Sci. 2008;45(3):329–50.
Courant R. Variational methods for the solution of problems of equilibrium and vibration. Bull Am Math Soc. 1943;49(1):1–61.
Crisfield MA. Non-linear finite element analysis of solid and structures, vol. 2. New York: Wiley; 1997.
Dawson EM, Roth WH, Drescher A. Slope stability analysis by strength reduction. Géotechnique. 1999;49(6):835–40.
Desai CS. Finite element residual schemes for unconfined flow. Int J Numer Meth Eng. 1976;10(6):1415–8.
Desai CS, Drumm EC, Zaman MM. Thin layer element for interfaces and joints. J Geotech Eng ASCE. 1985;111(6):793–815.
Du L, Du L, Peng S, Wang Y. Back calculations of formation elastic properties in VTI media. World Geol. 2001;20(4):396–416.
Duhamel JMC. Mémoir sur la méthode générale relative au movement de le chaleur dans les corps solides plongers dans des milieux dont la temperature varie avec le temps. J de L’ École Polytechnique Paris. 1833;14:20–77.
Duncan JM. State of the art: limit equilibrium and finite element analysis of slopes. J Geotech Geoenviron Eng ASCE. 1996;122(7):577–96.
Ellingwood B, MacGregor JG, Galambos TV, Cornell CA. Probability based load criteria: load factors and load combinations. J Struct Div ASCE. 1982;108(ST5):978–97.
Exadaktylos G, Tsoutrelis CE. Pillar failure by axial splitting in brittle rocks. Int J Rock Mech Min Sci Geomech Abstr. 1995;32(6):551–62.
Exadaktylos G, Tsouvala S, Liolios P, Barakos G. A three-dimensional model of an underground excavation and comparison with in situ measurements. Int J Num Anal Meth Geomech. 2007;31(3):411–33.
Fanelli DIM, Giuseppetti G. Techniques to evaluate effects of internal temperatures in mass concrete. Water Power Dam Constr. 1975;27(7):226–30.
Farias MM, Naylor DJ. Safety analysis using finite element. Comput Geotech. 1988;22(2):165–81.
FEMA. Federal guidelines for dam safety: earthquake analyses and design of dams. Washington, DC: FEMA; 2005.
Fenton GA, Griffiths DV. A mesh deformation algorithm for free surface problems. Int J Num Anal Meth Geomech. 1997;21(12):817–24.
France PW, Parekh CJ, Peters JC. Numerical analysis of free surface seepage problems. J Irrig Drainage Div ASCE. 1971;97(1):165–79.
Fu CH, Chen SH. Study on instability criteria of surrounding rock of underground engineering cavern based on catastrophe theory. Rock Soil Mech. 2008;29(1):167–72 (in Chinese).
Fujii Y, Kiyama T, Ishijima Y, Kodama J. Examination of a rock failure criterion based on circumferential tensile strain. Pure Appl Geophys. 1998;152(3):551–77.
Golshani A, Okui Y, Oda M, Takemura T. A micromechanical model for brittle failure of rock and its relation to crack growth observed in triaxial compression tests of granite. Mech Mater. 2006;38(4):287–303.
Goodman RE, Taylor R, Brekke TL. A model for the mechanics of jointed rock. J Soil Mech Found Div ASCE. 1968;94(SM3):637–60.
Griffiths DV, Lane PA. Slope stability analysis by finite element. Géotechnique. 1999;49(3):387–403.
Hasofer AM, Lind NC. An exact and invariant first order reliability format. J Eng Mech Div ASCE. 1974;100(EMl):111–21.
Hinton E, Irons B. Least squares smoothing of experimental data using finite elements. Strain. 1968;4(3):24–7.
Howarth DF. Apparatus to determine static and dynamic elastic moduli. Rock Mech Rock Eng. 1984;17(4):255–64.
Hrennikoff A. Solution of problems of elasticity by the frame-work method. ASME J Appl Mech. 1941;8(1):A619–715.
Huber WC, Harleman DRF, Ryan PJ. Temperature prediction in stratified reservoirs. J Hydraul Div ASCE. 1972;98(4):645–66.
ICOLD. Computational procedures for dam engineering—reliability and applicability (Bulletin 122). Paris: ICOLD; 2001.
ICOLD. Seismic design and evaluation of structures appurtenant to dams (Bulletin 123). Paris: ICOLD; 2002.
Imberger J, Patterson J, Hebbert B, Loh I. Dynamics of reservoir of medium size. J Hydraul Div ASCE. 1978;104(HY5):725–43.
Jäger P, Schmalholz SM, Schmid DW, Kuhl E. Brittle fracture during folding of rocks: a finite element study. Philos Mag. 2008;88(28–29):3245–63.
Kaiser PK, Amann F, Steiner W. How highly stressed brittle rock failure impacts tunnel design. In: Zhao J, et al., editors. Rock mechanics in civil and environmental engineering. Lausanne: ISRM; 2010. p. 27–38.
Kim JK, Lee SR. An improved search strategy for the critical slip surface using finite element stress fields. Comput Geotech. 1997;21(4):295–313.
Kwaśniewski M. Mechanical behavior of anisotropic rocks. Compr Rock Mech. 1993;4(1):16–22.
Kwaśniewski M, Takahashi M. Strain-based failure criteria for rocks: state of the art and recent advances. In: Zhao J, et al., editors. Rock mechanics in civil and environmental engineering. Lausanne: ISRM; 2010. p. 45–56.
Lacy LL. Dynamic rock mechanics testing for optimized fracture designs. In: SPE annual technical conference and exhibitions. San Antonio, TX: Society of Petroleum Engineers; 1997. p. 23–36 (Paper SPE38716).
Lechman JB, Griffiths DV. Analysis of the progression of failure of earth slopes by finite elements. In: Griffiths DV, et al., editors. Geotechnical special publication: slope stability. Denver, Colorado: ASCE; 2000. p. 250–65.
Leger P, Leclerc M. Hydrostatic, temperature, time-displacement model for concrete dams. J Eng Mech ASCE. 2007;133(3):267–77.
Lei CW, Patterson JC. Natural convection in a reservoir sidearm subject to solar radiation: a two-dimensional simulation. Numer Heat Transfer Part A. 2002;42(1–2):13–32.
Li X, Wu Z, Takahashi M, Yasuhara K. An experimental study on the failure strain-based failure criteria of brittle materials. J Appl Mech. 2000;3(8):387–94.
Liu XR, Tu YL, Zhong ZL, Liu YQ. Slope’s failure criterion based on energy catastrophe in shear strength reduction method. J Central South Univ (Sci Technol). 2016;47(6):2065–72 (in Chinese).
Luan MT, Wu YJ, Nian TK. A Criterion for evaluating slope stability based on development of plastic zone by shear strength reduction FEM. J Disaster Prev Mitig Eng. 2003;23(3):1–8.
Madsen HO, Krenk S, Lind NC. Methods of structural safety. Englewood Cliffs: Prentice Hall; 1986.
Maejima T, Morioka H, Mori T, Aoki K. Evaluation of loosened zones on excavation of a large underground rock cavern and application of observational construction techniques. Tunn Undergr Space Technol. 2003;18(2):223–32.
Mahtab M, Goodman RE. Three dimensional analysis of joint rock slope. In: Proceedings of the 2nd ISRM congress, vol. 3. Beograd: Privredni Pregled; 1970, p. 353–60.
Malmgren L, Saiang D, Töyrä J, Bodare A. The excavation disturbed zone (EDZ) at Kiirunavaara mine, Sweden—by seismic measurements. J Appl Geophys. 2007;61(1):1–15.
Manzari MT, Nour MA. Significance of soil dilatancy in slope stability analysis. J Geotech Geoenviron Eng ASCE. 2000;123(1):75–80.
Martino JB, Chandler NA. Excavation-induced damage studies at the Underground Research Laboratory. Int J Rock Mech Min Sci. 2004;41(8):1413–26.
Matsui T, San KC. Finite element slope stability analysis by shear strength reduction technique. Soils Found. 1992;32(1):59–70.
Mehta PK, Monteiro PJM. Concrete: microstructure, properties, and materials, 3rd ed. New York: McGraw-Hill; 2006.
Moura A, Lei XL, Nishisawa O. Prediction scheme for the catastrophic failure of highly loaded brittle materials or rocks. J Mech Phys Solids. 2005;53(11):2435–55.
Nasser KW, Neville AM. Creep of concrete at elevated temperatures. ACI J. 1965;62(12):1567–79.
Neumann ST. Saturated-unsaturated seepage by finite element. J Hydraul Div ASCE. 1973;99(12):2233–50.
Neumann ST, Witherspoon PA. Finite element method of analyzing of steady seepage with a free surface. Water Resour Res. 1970;6(3):889–97.
Neville AM, Diger WH, Brooks JJ. Creep of plain and structural concrete. London: Construction Press; 1983.
Newmark NM. A method of computation for structural dynamics. J Eng Mech Div ASCE. 1959;85(EM3):67–94.
Oden JT. Finite elements of nonlinear continua. New York: Dover Publications; 2006.
Orlob GT, Selna IG. Temperature variation in deep reservoirs. J Hydraul Div ASCE. 1983;108(HY3):301–25.
Owen DRJ, Hinton E. Finite elements in plasticity: theory and practice. Swansea: Pineridge Press Ltd; 1980.
Owen DRJ, Hinton E, Onate E. Computational plasticity: models, software and applications. Swansea: Pineridge Press Ltd; 1989.
Paulay T, Priestley MJN. Seismic design of reinforced concrete and masonry buildings. New York: Wiley; 1992.
Ramamurth T. Strength and modulus response of anisotropic rocks. Compr Rock Mech. 1993;4(1):23–8.
Raphael JM. Prediction of temperatures in rivers and reservoirs. J Power Div ASCE. 1962;88(2):157–81.
Sakurai S. Direct strain evaluation technique in construction of underground opening. In: Proceedings of the 22nd US symposium on rock mechanics. Cambridge: MIT; 1981, p. 278–82.
Sakurai S, Kawashima I, Otani T. A criterion for assessing the stability of tunnels. In: Ribeiro e Sousa L, Grossmann NF, editors. Proceedings of the 1993 ISRM international symposium EUROCK 93. Rotterdam: AA Balkema; 1995, p. 969–73.
Severn RT. The aseismic design of concrete dams (part one). Int J Water Power Dam Constr. 1978;28(1):37–8 (Part one), 28(2):41–6 (Part two).
Singh M. State-of-the-art finite element computer programs for thermal analysis of mass concrete structures. Civil Eng Practicing Des Eng. 1985;4(1):129–36.
Sloan SW. Geotechnical stability analysis. Géotechnique. 2013;63(7):531–72.
Snitbhan N, Chen WF. Elasto-plastic large deformation analysis of soil slopes. Comput Struct. 1978;9(6):567–77.
Stacey TR. A simple extension strain criterion for fracture of brittle rock. Int J Rock Mech Min Sci Geomech Abstr. 1981;18(6):469–74.
Stefan HG, Ford DE. Temperature dynamics in dimictic lakes. J Hydraul Div ASCE. 1975;101(1):97–114.
Tatro SB, Schrader EK. Thermal considerations for roller-compacted concrete. ACI J. 1985;82(2):119–28.
Taylor RL, Brown CB. Darcy flow solutions with a free surface. J Hydraul Div ASCE. 1967;93(HY2):25–33.
Troxell GE, Raphael JM, Davis RE. Long-time creep and shrinkage tests of plain and reinforced concrete. Proc ASTM. 1958;58(3):1101–20.
Turner MJ, Clough RW, Martin HC, Topp LJ. Stiffness and deflection analysis of complex structures. J Aeronaut Sci. 1956;23(9):805–23.
Ugai K, Leschinsky D. Three dimensional limit equilibrium and finite element analyses: a comparison of results. Soil Found. 1995;29(4):1–7.
Webb JP, Abouchacra R. Hierarchal triangular elements using orthogonal polynomials. Int J Numer Meth Eng. 1995;38(2):245–57.
Westergaard HM. Water pressure on dams during earthquakes. Trans ASCE. 1933;98(2):418–33.
Wilson EL. Three dimensional static and dynamic analysis of structures: a physical approach with emphasis on earthquake engineering, 2nd ed. Berkeley, CA: Computers and Structures Inc; 1998.
Wilson EL, Button MR. Three-dimensional dynamic analysis for multi-component earthquake spectra. Earthquake Eng Struct Dyn. 1982;10(3):471–6.
Wilson EL, Khalvati M. Finite elements for the dynamic analysis of fluid-solid systems. Int J Numer Meth Eng. 1983;19(11):1657–68.
Wright G, Ulhawwy H, Duncan JM. Accuracy of equilibrium slope stability analysis. J Soil Mech ASCE. 1973;99(SN10):783–91.
Yamagami T, Ueta Y. Search for critical slip lines in finite element stress fields by dynamic programming. In: Proceedings of the 6th international conference on numerical methods in geomechanics. Rotterdam: AA Balkema; 1988, p. 1335–9.
Yosida Y. Functional analysis, 6th ed. Berlin: Springer; 1980.
Zeeman EC. Catastrophe theory: selected papers 1972–1977. Massachusetts: Addison Wesley Publishing Co; 1977.
Zhang YL, Baptista AM. SELFE: a semi-implicit Eulerian-Lagrangian finite element model for cross-scale ocean circulation. Ocean Model. 2008;21(3–4):71–96.
Zhang YT, Chen P, Wang L. Residual flow method for seepage problem with free surface. J Hydraul Eng. 1988;10(8):18–26 (in Chinese).
Zheng H, Liu DF, Li CG. On the assessment of failure in slope stability analysis by the finite element method. Rock Mech Rock Eng. 2008;41(4):629–39.
Zhou HM, Sheng Q, Li WS. Excavation-disturbed zone and weaken degree of mechanical properties for rock mass of TGP shiplock slope. Chin J Rock Mech Eng. 2004;23(7):1078–81 (in Chinese).
Zhu BF. Finite element method—principle and application, 2nd ed. Beijing: China Water Power Press; 1998 (in Chinese).
Zhu BF. Thermal stresses and temperature control of mass concrete. Beijing: China Electric Power Press; 1999 (in Chinese).
Zienkiewicz OC, Cheung YK. The finite element method for analysis of elastic isotropic and orthotropic slabs. Proc Inst Civil Eng. 1964;28(4):471–88.
Zienkiewicz OC, Taylor RL. The finite element method for solid and structural mechanics. New York: McGraw Hill; 1967.
Zienkiewicz OC, Mayer P, Cheung YK. Solution of anisotropic seepage by finite elements. J Eng Mech Div ASCE. 1966;92(1):111–20.
Zienkiewicz OC, Irons BM, Scott IC, Cambell JS. Three-dimensional stress analysis. In: Proceedings of the IUTAM symposium on high speed computing of elastic structures. Liege: University of Liege Press; 1970, p. 413–33.
Zienkiewicz OC, Taylor RL, Zhu JZ. The finite element method—its basis & fundamentals, 6th ed. Oxford: Elsevier Butterworth-Heinemann; 2005.
Zienkiewicz OC, Taylor RL, Fox DD. The finite element method for solid and structural mechanics, 7th ed. Oxford: Butterworth-Heinemann; 2013.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Chen, SH. (2019). Fundamentals of the Finite Element Method. In: Computational Geomechanics and Hydraulic Structures. Springer Tracts in Civil Engineering . Springer, Singapore. https://doi.org/10.1007/978-981-10-8135-4_4
Download citation
DOI: https://doi.org/10.1007/978-981-10-8135-4_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-8134-7
Online ISBN: 978-981-10-8135-4
eBook Packages: EngineeringEngineering (R0)