Abstract
This paper deals with the issues of evaluation and choice of conceptual solution for a universal motor gear reducer, usually carried out during its development. It is a known fact that reducers could be delivered with a motor installed or in the so-called motorless version. In case of the delivery version with the motor, they could be equipped either with special reducer electric motors or with standard (IEC) motors. In case of a reducer intended for the special motor, in motorless version it has to be equipped with IEC motor adapter, for the customer’s option to use standard motors, plus it should have a classic input shaft. In case of a reducer delivered with IEC motor, its motor might be connected indirectly, using IEC motor adaptor, or directly onto the reducer, without the use of adaptor. In both cases the reducer has to be delivered with a classic input shaft. This paper conducts the evaluation of some particular solutions by leading reducer manufacturers, with the intention to point out the most satisfactory conceptual solution.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kuzmanović S (2009) Universal gear reducers with cylindrical gears. University of Novi Sad, Faculty of Technical Sciences, Novi Sad, p 231
Kuzmanović S, Rackov M (2009) Development tendencies of universal gear reducers. In: Proceedings of the 3rd international conference pover transmissions 09, Kallithea, 1–2 October 2009, pp 145–148
Kuzmanović S, Rackov M (2009) Usual possible ways of increasing of speed rations values of universal gear reducers, Acta technica napocensis, Technical University of Cluj-Napoka, Romania, Applied mathematics and mechanics, vol 3(52), pp 221–226
Kuzmanovic S, Tudose L, Rackov M (2008) Testing of universal gear reducers during the exploitation. J Mech Eng Des, Novi Sad, ISSN 1450-5401, pp 45–52
Kuzmanović S, Vereš M, Rackov M (2009) Analysis of characteristical mounting ways of gear wheels in universal gear reducers, Zeszyty Naukowe Politechniki Poznanskiej Budowa maszyn i zarzadzanie produkcja, Wydawnictwo Politechniki Poznanskej, Poznan 2009, No 11, pp 81–91
Kuzmanović S, Ianici S, Rackov M (2010) Analysis of typical method of connection of electric motor and gear unit in the frame of universal motor gear reducers.In: Proceedings of the machine design 2010, ISSN 1821-1259. Faculty of Technical Sciences, Novi Sad, pp 141–146
Rackov M, Kuzmanović S (2009) Analysis of the most common failures of gears in universal gear reducers. J Eng Ann Fac Eng Hunedoara, Tome VII, Fascicule 4, ISSN 1584-2665, University “Politechnica” Timişoara, Faculty of Engineering, Hunedoara, Romania, pp 67–74
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Kuzmanović, S., Mitrović, R., Rackov, M., Miltenović, Đ. (2013). Evaluation and Choice of Conceptual Solutions for a Universal Geared Engine Reducer. In: Dobre, G. (eds) Power Transmissions. Mechanisms and Machine Science, vol 13. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-6558-0_37
Download citation
DOI: https://doi.org/10.1007/978-94-007-6558-0_37
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-6557-3
Online ISBN: 978-94-007-6558-0
eBook Packages: EngineeringEngineering (R0)