Abstract
According to “Power security technology manual of the mining explode-proof (or Essence safety) type lithium ion battery”, the paper puts forward a kind solution of the power assembly and monitoring management system used in coal mine lithium ion (Li+) battery. Based on CAN bus communication, the paper adopts layer modular structure design, comes out with the hardware circuit and the software flow chart based on the finite state machine, achieves the comprehensive detection of Li+ battery temperature, voltage, and current, solves the problem of Li+ battery equilibrium management during grouping process, improves the performance and lifetime of Li+ battery, establishes the Li+ battery state observation matrix, through the nonlinear curve fitting, estimates the Li+ battery state of charge (SOC), and improves the accuracy and reliability of calculating the battery capacity. The system can be used as momentum power supply, start power supply, and reserved power supply to coal mine equipment and has good development prospect and broad application market.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Liu F (2011) Alternative opportunities for lithium batteries industry and stop of lead-acid batteries industry. Consumption Daily. 06 Sept 2011
Qianqian L, Yue Z. Chose hundreds of lithium batteries companies after the blood lead event. Economic information daily. 24 May 2011
Wu Y, Wang H, Wang J (2005) The controller area network interface chip 82C250 and its application. J Guizhou Univ Technol 34(3):76–79
Zhou H (2011) Rectify and reform of the lead-acid batteries and the coming of lithium batteries. China United Commercial Daily. 11 July 2011
Jiang Z, Liu L, Li P (2003) A design of hybrid electric locomotive control system based on can bus. Mach Dev 32(5):63–65
Wang Y, Xu W, Hao L (2008) STM32 series ARM cortex-M3 micro controller principle and practice. Beijing Aerospace University Press, Beijing
Li J (2010) Power measurement and data transmission based on STM32 chip. Autom Instrum 3:137–139
Zhou L (2008) Simply ARM7-LPC2400. Guangzhou Zhi Yuan Electronics Company, Guangzhou
Xu X, Wang L, Zhou H (2003) Implementation framework of finite state machines. J Eng Des 10(5):251–255
Cai Z, Gui C (2007) Relationship between open-circuit voltage and discharge capacity of VRLA batteries for electric bicycles. Chin Battery Ind 12(6):366–369
Yetai F (2010) Error theory and data processing. Mechanical Industry Press, Beijing
Zeng J, Bu F (2011) Study of SOC estimation and measurement of Li-ion battery based on polynomial regression algorithm. J Dalian Jiaotong Univ 32(4):70–74
Acknowledgements
This work was financially supported by Science & Technology Development Plan Project of Shandong Province (2012GSF11606).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Yu, Z., Sun, C., Fang, J., Xiao, L. (2015). Power Assembly and Monitoring Management System of Lithium Ion Battery in Mine. In: Proceedings of China Modern Logistics Engineering. Lecture Notes in Electrical Engineering, vol 286. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-44674-4_44
Download citation
DOI: https://doi.org/10.1007/978-3-662-44674-4_44
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-44673-7
Online ISBN: 978-3-662-44674-4
eBook Packages: EngineeringEngineering (R0)