Abstract
Airborne transient electromagnetic (ATEM) data for mapping clay areas are acquired in four areas in Sweden. The resistivity models from the inversions of ATEM data are compared to the existing geotechnical, geological and ground geophysical data in one of the areas at Slumpån located in the Göta River valley. The ATEM models reveal information about layering and thickness of the sediments, the river depth and bedrock undulations. The estimated resistivities at the known locations of quick clays are within the range of 8–40 Ωm. The variation is dependent on the type of the surrounding sediments and the leaching process. The resistivity models have a limited resolution and must always be integrated with geotechnical and geological information for a confident and precise interpretation that leads to a realistic model. The method can be utilized as an effective tool prior to planning of any detailed and costly ground geotechnical investigations.
Keywords
- Electrical Resistivity Tomography
- Resistivity Model
- Cone Penetration Test
- Electrical Resistivity Tomography
- Marine Clay
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Auken E, Christiansen AV, Westergaard JA, Kirkegaard C, Foged N, Viezzoli A (2009) An integrated processing scheme for high-resolution airborne electromagnetic surveys, the SkyTEM system. Explor Geophys 40:184–192
Christensen CW, Pfaffhuber AA, Anschütz H, Smaavik TF (2015) Combining airborne electromagnetic and geotechnical data for automated depth to bedrock tracking. J Appl Geophys 119:178–191
Dahlin T, Löfroth H, Schälin D, Seur P (2013) Mapping of quick clay using geoelectrical imaging and CPTU-resistivity. Near Surf Geophys 11:659–670
Fredén C (1984) Beskrivning till jordartskartan. Sveriges Geologiska Undersökning, Vänersborg, p 48. (In Swedish)
HydroGeophysics Group, Dept. of Earth Sciences University of Aarhus (2011) Guideline and standards for SkyTEM measurements, processing and inversion, version 2.5, pp 51
Löfroth H, Kjellberg U (2003) The May 1997 landslide in soft clay at Vagnhärad, Sweden. Lessons learnt from landslide disasters in Europe. Report EUR20558EN, 33–40. European Commission Joint Research Centre
Löfroth H, Suer P, Dahlin T, Leroux V, Schälin D (2011) Quick-clay mapping by resistivity-surface resistivity, CPTU-R and chemistry to complement other geotechnical sounding and sampling, Report GÄU 30. Swedish Geotechnical Institute, Linköping
Malehmir A, Bastani M, Krawczyk C, Gurk M, Ismail N, Polom U, Persson L (2013) Geophysical assessment and geotechnical investigation of quick-clay landslides – a Swedish case study. Near Surf Geophys 11:341–350
Melchiorre C, Smith C, Rodhe L (2014) Analysis of landslide scarp data, Sweden, Report Dnr: 315–1895/2014. Geological Survey of Sweden, Uppsala
Nadim FS, Pedersen AS, Thomé PS, Sigmundsson F, Engdahl M (2008) Natural hazards in Nordic countries. Episodes 31:176–184
Rankka K, Sköld YA, Hultén C, Larsson R, Leroux V, Dahlin T (2004) Quick-clay in Sweden. Swed Geotech Inst, Tech Rep 65:145
Rosenqvist IT (1946) Om leirers kvikkagtighet. Statens Vegvesen. Veglaboratoriet. Meddelande Nr 4. Oslo. (In Norwegian)
Salas-Romero S, Malehmir A, Snowball I, Lougheed BC, Hellqvist M (2015) Identifying landslide preconditions in Swedish quick clays – insights from integration of surface geophysical, core sample- and downhole-property measurements. Landslides, 1–19, ISSN 1612–5118
Shan C, Bastani M, Malehmir A, Persson L, Engdahl M (2014) Integrated 2D modeling and interpretation of geophysical and geotechnical data to delineate quick clays at a landslide site in Southwest Sweden. Geophysics 79:EN61–EN75
Solberg IL, Long M, Baranwal VC, Gylland AS, Rønning JS (2016) Geophysical and geotechnical studies of geology and sediment properties at a quick-clay landslide site at Esp, Trondheim, Norway. Eng Geol 208:214–230. ISSN 0013-7952
Viezzoli A, Christiansen AV, Auken E, Sørensen KI (2008) Quasi-3D modelling of airborne TEM data by spatially constrained inversion. Geophysics 73:F105–F113
Wang S, Malehmir A, Bastani M (2016) Geophysical characterization of areas prone to quick-clay landslides using radio-magnetotelluric and seismic methods. Tectonophysics 677:248–260
Acknowledgements
This study is a part of a pilot project financed by the Swedish Civil Contingencies Agency (MSB). The authors would like to thank Dr. Vikas C. Baranwal, Team leader Jan Steinar Rønning, and Dr. Inger-Lise Solberg from the Geological Survey of Norway (NGU) who kindly accepted to review this paper.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Bastani, M., Persson, L., Löfroth, H., Smith, C.A., Schälin, D. (2017). Analysis of Ground Geophysical, Airborne TEM, and Geotechnical Data for Mapping Quick Clays in Sweden. In: Thakur, V., L'Heureux, JS., Locat, A. (eds) Landslides in Sensitive Clays. Advances in Natural and Technological Hazards Research, vol 46. Springer, Cham. https://doi.org/10.1007/978-3-319-56487-6_41
Download citation
DOI: https://doi.org/10.1007/978-3-319-56487-6_41
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-56486-9
Online ISBN: 978-3-319-56487-6
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)