Skip to main content
SpringerLink
Log in

Cement-Bonded Lignocellulosic Panel (CLP): A Promising Environmental Friendly Construction Material for Conservation of Forest Resources

  • Living reference work entry
  • First Online:
Handbook of Ecomaterials

Abstract

Production of environmental friendly cement-bonded panels (CBPs) for internal and external purposes from lignocellulosic materials has come under limelight as a consequence of the demand for environmental friendly high strength construction materials. Moreover, environmental concern about the disposal of waste materials, their low cost, and availability has renewed attention on quality CBPs. This book chapter provides an overview on development of cement-bonded panels using assorted range of lignocellulosic materials. Different manufacturing parameters of CBPs such as pressing temperature and pressure, curing time, particle size, mixing ratio, and additives are discussed in this chapter. In addition, the physical, mechanical, and biological properties along with the availability of raw materials for different type of CBPs are also reported. The environmental friendly cement-bonded panels not only provide a solution for lowering environmental pollution but also ensure sustainable use of natural resources and thus, results in high strength construction materials.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Institutional subscriptions

References

  1. Moslemi AA (1989) Fiber and particleboards bonded with inorganic binders: international conference: Papers, Forest Products Research Society

    Google Scholar 

  2. Wolfe RW, Gjinolli A (1999) Durability and strength of cement-bonded wood particle composites made from construction waste. For Prod J 49(2):24

    Google Scholar 

  3. Van Elten I.N.G.E.J.B. (2006) Cement bonded particle board (cbpb) and wood strand cement board (eltoboard): production, properties and applications, in 10th inter. In: Inorganic bonded fiber composites conference (IIBCC), Sao Paulo

    Google Scholar 

  4. Pereira C, Jorge FC, Irle M, Ferreira JM (2006) Characterizing the setting of cement when mixed with cork, blue gum, or maritime pine, grown in Portugal I: temperature profiles and compatibility indices. J Wood Sci 52(4):311

    Article  Google Scholar 

  5. Soroushian P, Won J-P, Chowdhury H, Nossoni A (2003) Development of accelerated processing techniques for cement-bonded wood particleboard. Cem Concr Compos 25(7):721–727

    Article  Google Scholar 

  6. Aggarwal LK, Agrawal SP, Thapliyal PC, Karade SR (2008) Cement-bonded composite boards with arhar stalks. Cem Concr Compos 30(1):44–51. Available at: https://doi.org/10.1016/j.cemconcomp.2007.07.004

    Article  Google Scholar 

  7. Ashori A, Tabarsa T, Azizi K, Mirzabeygi R (2011) Wood–wool cement board using mixture of eucalypt and poplar. Ind Crop Prod 34(1):1146–1149

    Article  Google Scholar 

  8. Faria G, Chastre C, Lúcio V, Nunes  (2013) Compression behaviour of short columns made from cement-bonded particle board. Constr Build Mater 40:60–69

    Article  Google Scholar 

  9. Karade SR (2010) Cement-bonded composites from lignocellulosic wastes. Constr Build Mater 24(8):1323–1330. https://doi.org/10.1016/j.conbuildmat.2010.02.003

    Article  Google Scholar 

  10. Salehuddin ABM (1992) Wood and fibre composite materials

    Google Scholar 

  11. Youngquist JA (1999) Panel products, Chapter 10, pp 1–31

    Google Scholar 

  12. Saunders A, Davidson E (2014) Cement boards 101Global Cement Magazine, vol 32. Retrieved from www.globalcement.com

  13. Van Elten GJ (2013, May 22) Wood strand cement boards with a practically closed surface and production process, Google Patents

    Google Scholar 

  14. Andrade A, Caldeira F (2010) Assessment of the compatibility of wood and plastic with cement for their recycling in cement composites. Revista da Ciência e Tecnologia, pp 66:58–66

    Google Scholar 

  15. Jorge FC, Pereira C, Ferreira JMF (2004) Wood-cement composites: a review. Holz Als Roh-Und Werkstoff 62(5):370–377

    Article  Google Scholar 

  16. Moslemi AA, Garcia JF, Hofstrand AD (1983) An evaluation of the rate of heat evolution of portland cement-northern Rocky Mountain species. Wood Fiber Sci 15(2):164–176

    Google Scholar 

  17. Thygesen A, Daniel G, Lilholt H, Thomsen AB (2006) Hemp fiber microstructure and use of fungal defibration to obtain fibers for composite materials. J Nat Fibers 2(4):19–37

    Article  Google Scholar 

  18. Semple KE, Evans PD (2004) Wood-cement composites: suitability of Western Australian Mallee Eucalypt, Blue Gum and Melaleucas: a report for the RIRDC/Land & Water Australia/FWPRDC/MDBC Joint Venture Agroforestry Program, RIRDC

    Google Scholar 

  19. Okino EYA, de Souza MR, Santana MAE, Alves MV d S, de Sousa ME, Teixeira DE (2005) Physico-mechanical properties and decay resistance of Cupressus spp. cement-bonded particleboards. Cem Concr Compos 27(3):333–338

    Article  Google Scholar 

  20. Miyatake A, Fujii T, Hiramatsu Y, Abe H, Tonosaki M (2002) Manufacture of wood strand-cement composite for structural use. In: Aciar proceedings, ACIAR, 1998

    Google Scholar 

  21. Chow P, Harp TL, Meimban R, Youngquist JA, Rowell RM (1994) Biodegradation of acetylated southern pine and aspen composition board. The IRG/WP 94–40020, Stockholm

    Google Scholar 

  22. Karade SR, Irle M, Maher K (2003) Assessment of wood-cement compatibility: a new approach. Holzforschung 57:672–680

    Article  Google Scholar 

  23. Markessini E, Roffael E, Rigal L (1997) Panels from annual plant fibers bonded with urea-formaldehyde resins. In: Proceedings of the 31th international particleboard/composite materials symposium, Pullman, Washington, pp 147–160

    Google Scholar 

  24. Moslemi AA, Pfister SC (1987) The influence of cement-wood ratio and cement type on bending strength and dimensional stability of wood-cement composite panels. Wood Fiber Sci 19(2):165–175

    Google Scholar 

  25. Rowell RM (1992) Opportunity for lignocellulosic materials and composites. In: Emerging technologies for materials and chemicals from biomass. ACS symposium series 476. American Chemical Society, Washington, DC

    Google Scholar 

  26. Sandermann W, Brendel M (1956) Studies on inorganic-bonded wood materials – part 2: the cement poisoning effect of constituents of wood and their dependence on the chemical composition. Holz Roh Werkst 14(8):307–313

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Forestry and Wood Technology Discipline, Khulna University, Khulna, Bangladesh

    Md Rafikul Islam, Fatima Rahman, Md Nazrul Islam, Md Nasim Rana, Suresh Kumar Nath, Md Ashaduzzaman & Md Iftekhar Shams

Authors
  1. Md Rafikul Islam
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Fatima Rahman
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Md Nazrul Islam
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Md Nasim Rana
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Suresh Kumar Nath
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Md Ashaduzzaman
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Md Iftekhar Shams
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Md Nazrul Islam .

Editor information

Editors and Affiliations

  1. Instituto de Ingeniería Civil, Universidad Autónoma de Nuevo León Instituto de Ingeniería Civil, San Nicolás de los Garza, Nuevo León, Mexico

    Leticia Myriam Torres Martínez

  2. Universidad Autónoma de Nuevo León , Monterrey, Mexico

    Oxana Vasilievna Kharissova

  3. Universidad Autónoma de Nuevo León , Monterrey, Mexico

    Boris Ildusovich Kharisov

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer International Publishing AG

About this entry

Check for updates. Verify currency and authenticity via CrossMark

Cite this entry

Islam, M. et al. (2018). Cement-Bonded Lignocellulosic Panel (CLP): A Promising Environmental Friendly Construction Material for Conservation of Forest Resources. In: Martínez, L., Kharissova, O., Kharisov, B. (eds) Handbook of Ecomaterials. Springer, Cham. https://doi.org/10.1007/978-3-319-48281-1_178-1

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-48281-1_178-1

  • Received:

  • Accepted:

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-48281-1

  • Online ISBN: 978-3-319-48281-1

  • eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering

Publish with us

Policies and ethics

Search

Navigation