Abstract
Widely used petrochemical polymers have negative impact on the environment, so the use of biobased material should become widespread due to growing interest in sustainability and environmental issues. The use of renewable raw materials substantially improves the carbon footprint and has a positive impact on the life-cycle assessment of plastic products; thus, the development of polyamides from renewable resources – one of the largest industrial scale engineering plastics of great significance – is very important. This review focuses on recent research and development of biobased polyamides. Environmental impact of polyamides is described in view of the potential applications in various fields. Biodegradation of polyamides and some factors affecting their biodegradability are also presented.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
References
Nguyen XH, Honda T, Wang Y, Yamamoto R (2010) Eco-materials. Module-H, University of Tokyo, pp 123–134. Retrieved from http://www.peekyou.com/x-h_nguyen
Rydz J, Sikorska W, Kyulavska M, Christova D (2015) Polyester-based (bio)degradable polymers as environmentally friendly materials for sustainable development. Int J Mol Sci 16(1):564–596. https://doi.org/10.3390/ijms16010564
Greener INDUSTRY. Nylon. http://www.greener-industry.org.uk/index.htm. Accessed 27 Jun 2017
Page IB (2000) Polyamides as engineering thermoplastic materials. Rapra Review Reports 11(1):Report 121
McMurry JE (2016) Fundamentals of organic chemistry, 6th edn. Cram101 Textbook Reviews
Polyamides. Chapter I, p 247–281. http://wpage.unina.it/avitabil/testi/Nylon.pdf. Accessed 26 Jun 2017
Wypych G (2016) Handbook of Polymers, 2nd edn. Toronto 2016, Toronto
Ellis B, Smith R (eds) (2008) Polymers: a property database, 2nd edn. Boca Raton, CRC Press
Global Chemical Network. http://www.chemnet.com/. Accessed 27 Jun 2017
Look for chemicals. http://www.lookchem.com/. Accessed 27 Jun 2017
PubChem Compound. https://www.ncbi.nlm.nih.gov/pccompound. Accessed 27 Jun 2017
Guidechem. http://www.guidechem.com/. Accessed 27 Jul 2017
Ichemistry. http://search.ichemistry.cn/. Accessed 27 Jul 2017
(1994) Polyamide (nylon) plastics: properties, performance, and military applications, Military handbook, MIL-HDBK-797(AR), Department of Defense, USA. http://www.everyspec.com. Accessed 27 Jun 2017
polymerdatabase.com (2015) Polyamides. In: Polymer properties database. http://polymerdatabase.com/polymer%20classes/Polyamide%20type.html. Accessed 26 Jun 2017
Maitz MF (2015) Applications of synthetic polymers in clinical medicine. Biosurf Biotribol 1(3):161–176. https://doi.org/10.1016/j.bsbt.2015.08.002
Winnacker M, Rieger B (2016) Biobased polyamides: recent advances in basic and applied research. Macromol Rapid Commun 37:1391–1413. https://doi.org/10.1002/marc.201600181
Marketsandmarkets CH 1385 (2017) Polyamide market by application (engineering plastics, fiber), type (PA 6, PA 66, bio-based & specialty polyamides), and region (Asia-Pacific, North America, Europe, Middle East & Africa, South America) – global forecast to 2021. http://www.marketsandmarkets.com/Market-Reports/global-nylon-market-930.html. Accessed 20 Jul 2017
Rohan. Polyamide Market worth 30.76 Billion USD by 2021. http://www.marketsandmarkets.com/PressReleases/global-nylon.asp. Accessed 20 Jul 2017
Endres HJ, Siebert-Raths A (2011) Engineering biopolymers markets, manufacturing, properties and applications. Carl Hanser Verlag, Munich, p 95
Liu Z, Zhou P, Yan D (2004) Preparation and properties of nylon-1010/montmorillonite nanocomposites by melt intercalation. J Appl Polym Sci 91:1834–1841. https://doi.org/10.1002/app.13336
Zeng H, Gao C, Wang Y, Watts PCP, Kong H, Cui X, Yan D (2006) In situ polymerization approach to multiwalled carbon nanotubes-reinforced nylon 1010 composites: mechanical properties and crystallization behavior. Polymer 47:113–122. https://doi.org/10.1016/j.polymer.2005.11.009
Liu T, Lim KP, Tjiu WC, Pramoda KP, Chen ZK (2003) Preparation and characterization of nylon 11/organoclay nanocomposites. Polymer 44:3529–3535. https://doi.org/10.1016/S0032-3861(03)00252-0
Rajesh JJ, Bijwe J (2004) Influence of fillers on the low amplitude oscillating wear behaviour of polyamide 11. Wear 256(1–2):1–8. https://doi.org/10.1016/S0043-1648(03)00200-X
Mark HF (2005) Encyclopedia of polymer science and technology, 3rd edn, vol. 3. John Wiley & Sons, Weinheim, p 559
Rydz J, Musioł M, Zawidlak-Węgrzyńska B, Sikorska W (2017) Present and future of (bio)degradable polymers for food packaging applications. In: Grumezescu AM, Holban AM (eds) Handbook of food bioengineering, vol. 20. Elsevier, in print
nova-Institut GmbH (2017) TOP Bio-based polymers worldwide: Ongoing growth despite difficult market environment. http://news.bio-based.eu/bio-based-polymers-worldwide-ongoing-growth-despite-difficult-market-environment/. Accessed 27 Jun 2017
nova-Institut GmbH (2015) Bio-based Building Blocks and Polymers in the World, nova-Institut GmbH, Version 2015–05
Cathay Industrial Biotech Ltd. http://www.cathaybiotech.com/en/. Accessed 23 Jul 2017
Jiang Y, Loos K (2016) Enzymatic synthesys of biobased polyesters and polyamides. Polymers 8:243. https://doi.org/10.3390/polym8070243
Gallezot P (2012) Conversion of biomass to selected chemical products. Chem Soc Rev 41(4):1538–1558. https://doi.org/10.1039/c1cs15147a
Salimon J, Salih N, Yousif E (2012) Industrial development and applications of plant oils and their biobased oleochemicals. Arab J Chem 5(2):135–145. https://doi.org/10.1016/j.arabjc.2010.08.007
De Espinosa LM, Meier MAR (2010) Plant oils: the perfect renewable resource for polymer science?! Euro Polym J 47:837–852. https://doi.org/10.1016/j.eurpolymj.2010.11.020
Baumann F-E, Haeger H (2007) Polyamides from renewable feedstock – New materials versus established products, L14. Fats and oils as renewable feedstock for the chemical industry. Program Abstracts list of participants 2–3 Sep Emden, Germany
Ogunniyi DS (2006) Castor oil: a vital industrial raw material. Bioresour Technol 97:1086–1091. https://doi.org/10.1016/j.biortech.2005.03.028
Florjańczyk Z, Dębowski M, Chwojnowska E, Łokaj K, Ostrowska J (2009) Synthetic and natural polymers in modern polymeric materials. Part I. Polymers from renewable resources and polymer nanocomposites. Polimery 54:609–694
Kuciel S, Kuźniar P, Liber-Kneć A (2012) Polyamides from renewable sources as matrices of short fiber reinforced biocomposites. Polimery 57(9):627–634
Biron M (ed) (2017) Industrial applications of renewable plastics: environmental, technological, and economic advances. Plastics Design Library, William Andrew, Elsevier, Oxford/Amsterdam
Thielen M (2010) Basic of bio-polyamies. Bioplastics. MAGAZINE 3:50–53
Ensinger 10/12 E9911075A011GB (2012) Engineering plastics – The Manual. https://www.ensinger-inc.com/downloads/lit_brochures/Ensinger-Manual.pdf. Accessed 20 Jul 2017
Bio-based News (2014) BASF presents Ultramid® for flexible packaging films derived from renewable raw materials. http://news.bio-based.eu/basf-presents-ultramid-flexible-packaging-films-derived-renewable-raw-materials/. Accessed 23 Jul 2017
Ahmadi S, Morshedian J, Hashemi SA (2010) Effects of molecular weight on the dynamic mechanical and rheological properties of anionically polymerized polyamide 6 containing nanofiber. J Vinyl Addit Technol 16:152–160. https://doi.org/10.1002/vnl.20223
Reimschuessel HK (1977) Nylon 6. Chemistry and mechanisms. J Polym Sci Macromol Rev 12:65–139. https://doi.org/10.1002/pol.1977.230120102
Laredo E, Hernandez MC (1997) Moisture effect on the low- and high-temperature dielectric relaxations in nylon-6. J Polym Sci B Polym Phys 35:2879–2888. https://doi.org/10.1002/(SICI)1099-0488(199712)35:17<2879::AID-POLB11>3.0.CO;2-4
Jiang Y, Loos K (2016) Polymers 8(7)243: 53 pages. doi: https://doi.org/10.3390/polym8070243
Buntara T, Noel S, Phua PH, Melián-Cabrera I, de Vries JG, Heeres HJ (2011) Caprolactam from renewable resources: catalytic conversion of 5-hydroxymethylfurfural into caprolactone. Angew Chem Int Ed Engl 50(31):7083–7087. https://doi.org/10.1002/anie.201102156
Saskiawan I (2008) Biosynthesis of polyamide 4, a biobased and biodegradable polymer. Microbiol Indonesia 2:119–123
Han J (2017) Biorenewable strategy for catalytic ε-caprolactam production using cellulose- and hemicellulose-derived γ-valerolactone. ACS Sustain Chem Eng 5(2):1892–1898. https://doi.org/10.1021/acssuschemeng.6b02616
International Organization for Standardization. ISO 1110:1995. Plastics - Polyamides - Accelerated conditioning of test specimens. Technical Committee: ISO/TC 61/SC 9 Thermoplastic materials
Becker GW, Braun D, Bottenbruch L, Binsack R (1998) Polyamide. In: Kunststoff Handbuch, vol 3/4. Hanser Verlag, München-Wien
Kellie G (ed) (2016) Advances in technical nonwovens, Woodhead publishing series in textiles: number, vol 181. Woodhead Publishing, Elsevier, Oxford/Amsterdam
Carlson E, Nelson K (2003) Nylon under the hood: a history of innovation. DuPont™
Dros AB, Larue O, Reimond A, De Campoa F, Pera-Titus M (2015) Hexamethylenediamine (HMDA) from fossil- vs. bio-based routes: an economic and life cycle assessment comparative study. Green Chem 17:4760–4772. https://doi.org/10.1039/C5GC01549A
Rennovia produces RENNLONTM nylon, a 100% bio-based nylon 66 polymer. https://www.rennovia.com/wp-content/uploads/2014/12/Rennovia-produces-RENNLON-28TM-29-nylon-a-100-bio-based-nylon-6-polymer-Press-Release-10.1.2013.pdf. Accessed 23 Jul 2017
Arkema S.A. Arkema new high performance long chain polyamide-PA XY (Rilsan T & Hiprolon®) http://www.arkema.co.jp/export/sites/japan/.content/medias/downloads/2016-plastic-japan-rilsan-t-and-hiprolon-en.pdf. Accessed 24 Jul 2017
Arkema S.A. Rilsan® Polyamide 11 resin. http://www.arkema.com/en/products/product-finder/product-viewer/Rilsan-Polyamide-11-Resin/. Accessed 24 Jul 2017
Ltd P (2015) Nylon:11. http://plastimnew.websitedesigntest.co.uk/content/uploads/library/technical_datasheets/Nylon-11-Technical-Data-Sheet.pdf. Accessed 24 Jul 2017
Plastim. Nylon 11. http://plastim.co.uk/nylon-11. Accessed 25 Jul 2017
Agiplast. The global leader in compounding high performance polymers. http://www.agiplast-compounding.com/. Accessed 25 Jul 2017
Martino L, Basilissi L, Farina H, Ortenzi M-A, Zini E, Silvestro G-D, Scandola M (2014) Bio-based polyamide 11: synthesis, rheology and solid-state properties of star structures. Eur Polym J 59:69–77
biowerkstoff-kongress. High performance polyamide 12 based on a 100% renewable resource. http://www.biowerkstoff-kongress.de/media/files/Award/15EvonikIndustriesAG-AdditionaldocumentEN.pdf. Accessed 13 Jul 2017
McKeen LW (2010) Polyamides (nylons), chapter 8. In: Fatigue and tribological properties of plastics and elastomers, 2nd edn. William Andrew, Elsevier, Oxford/Amsterdam, pp 175–228
Evonik. VESTAMID® L—polyamide 12. http://www.vestamid.com/product/vestamid/en/products-services/vestamid-l/pages/default.aspx. Accessed 26 Jul 2017
RTP Co. NYLON 12 (PA) — POLYAMIDE 12. https://www.rtpcompany.com/products/product-guide/nylon-12-pa-polyamide-12/. Accessed 26 Jul 2017
PP Performance Plastics. Nylon 12 (PA12). http://www.performance-plastics.co.uk/product/classification/nylon-12-pa12/. Accessed 26 Jul 2017
Sculpteo. 3D printing material: Grey Plastic. https://www.sculpteo.com/en/materials/grey-plastic-material/. Accessed 26 Jul 2017
Cai Z, Liu X, Zhou Q, Wang Y, Zhu C, Xiao X, Fang D, Bao H (2017) The structure evolution of polyamide 1212 after stretched at different temperatures and its correlation with mechanical properties. Polymer 117:249–258. https://doi.org/10.1016/j.polymer.2017.04.037
Ren M, Song J, Zhao Q, Li Y, Chen Q, Zhang H, Mo Z (2004) Primary and secondary crystallization kinetic analysis of nylon 1212. Polym Int 53:1658–1665. https://doi.org/10.1002/pi.1490
Cai Z, Bao H, Zhu C, Zhu S, Huang F, Shi J, Hu J, Zhou Q (2016) Structure evolution of polyamide 1212 during the uniaxial stretching process: in situ synchrotron wide-angle X-ray diffraction and small-angle X-ray scattering analysis. Ind Eng Chem Res 55(28):7621–7627. https://doi.org/10.1021/acs.iecr.6b00643
Griehl W, Ruestem D (1970) Nylon-12-preparation, properties, and applications. Ind Eng Chem 62(3):16–22. https://doi.org/10.1021/ie50723a005
Glasscock D, Atolino W, Kozielski G, Martens M (2006) High performance polyamides fulfill demanding requirements for automotive thermal management components. DuPont Engineering Polymers, Wilmington, 9 pages
DSM (2016) DSM supplies Stanyl PA 46 for low-friction timing system parts on the latest generation petrol engines. https://www.dsm.com/products/stanyl/en_US/press-releases/2016/01/2016-01-11-dsm-supplies-stanyl-pa-46-for-low-friction-timing-system-parts-on-the-latest-generation-petrol-engines.html. Accessed 19 Jul 2017
Matbase: the free and independent online materials properties resource. https://www.matbase.com/. Accessed 20 Jul 2017
Zhang Z, Huang K, Liu Z (2011) Synthesis of high molecular weight nylon 46 in supercritical carbon dioxide. Macromolecules 44:820–825. https://doi.org/10.1021/ma102696y
Tsuge Y, Kawaguchi H, Sasaki K, Kondo A (2016) Engineering cell factories for producing building block chemicals for bio-polymer synthesis. Microb Cell Factories 15(19):12 pages. https://doi.org/10.1186/s12934-016-0411-0
Gallezot P (2012) Conversion of biomass to selected chemical products. Chem Soc Rev 41:1538–1558. https://doi.org/10.1039/c1cs15147a
Bruder U (2015) In: Smith M (ed) User’s guide to plastic. Hanser Publishers, Munich
Materials/DSM (2009) Biobased engineering plastic. bioplastics MAGAZINE 05:26
Leszczyńska A, Kiciliński P, Pielichowsk K (2015) Biocomposites of polyamide 4.10 and surface modified microfibrillated cellulose (MFC): influence of processing parameters on structure and thermomechanical properties. Cellulose 22(4):2551–2569. https://doi.org/10.1007/s10570-015-0657-4
Pagacz J, Raftopoulos KN, Leszczyńska A, Pielichowski K (2016) Bio-polyamides based on renewable raw materials glass transition and crystallinity studies. J Therm Anal Calorim 123:1225–1237. https://doi.org/10.1007/s10973-015-4929-x
Janssen PGA, Ligthart GBWL, Rulkens R, (2012) Polyamide containing monomer units of 1,4-butylene diamine. Patent WO2012110413 A1
Becker B, Kopannia S, Nataniel T, Ticozzelli F, Heinrich D, Marchese L (2012) Hydrolytically stable polyamide. Patent US 20120175817 A1
Jasinska-Walc L, Dudenko D, Rozanski A, Thiyagarajan S, Sowinski P, van Es D, Shu J, Hansen MR, Koning CE (2012) Structure and molecular dynamics in renewable polyamides from dideoxy–diamino isohexide. Macromolecules 45(14):5653–5666. https://doi.org/10.1021/ma301091a
Jasinska L, Villani M, Wu J, van Es D, Klop E, Rastogi S, Koning CE (2011) Novel, fully biobased semicrystalline polyamides. Macromolecules 44(9):3458–3466. https://doi.org/10.1021/ma200256v
CHINAPLAS (2013) Cathay Industrial Biotech, Ltd. – a global producer of bio-based long-chain dicarboxylic acids. http://webcache.googleusercontent.com/search?q=cache:uwltNtve2DgJ:www.2456.com/physhows/12-2R61_202655_20130321035649_eng.doc+&cd=1&hl=pl&ct=clnk&gl=pl. Accessed 23 Jul 2017
Ma W, Chen K, Li Y, Hao N, Wang X, Ouyang P (2017) Advances in Cadaverine bacterial production and its applications, engineering, green chemical engineering – review. Engineering 3(3):308–317. https://doi.org/10.1016/J.ENG.2017.03.012
Jiang Y, Loos K (2016) Enzymatic synthesis of biobased polyesters and polyamides. Polymers 8(7)243:53 pages. doi: https://doi.org/10.3390/polym8070243
Mimitsuka T, Sawai H, Hatsu M, Yamada K (2007) Metabolic engineering of Corynebacterium glutamicum for cadaverine fermentation. Biosci Biotechnol Biochem 71(9):2130–2135. https://doi.org/10.1271/bbb.60699
Kind S, Neubauer S, Becker J, Yamamoto M, Völkert M, Gv A, Zelder O, Wittmann C (2014) From zero to hero – production of biobased nylon from renewable resources using engineered Corynebacterium glutamicum. Metab Engp 25:113–123. https://doi.org/10.1016/j.ymben.2014.05.007
Feddersen KD (2017) AKROMID® S eco-friendly resin. Polyamide 6:10. https://akro-plastic.com/product-overview/pa-610-polyamid-610/. Accessed 23 Jul 2017
ANIDPOLYMERS. Polyamide 610 Molding (PA 610 L). http://anid.ru/en/poliamid/610. Accessed 23 Jul 2017
VESTAMID® Terra. http://www.vestamid.com/product/vestamid/en/products-services/vestamid-terra/general-information/pages/default.aspx. Accessed 23 Jul 2017
Armioun S, Pervaiz M, Sain M (2017) Biopolyamides and high-performance natural fiber-reinforced biocomposites biopolyamides and high-performance natural fiber-reinforced biocomposites, chapter 10. In: Thakur VK, Thakur MK, Kessler MR (eds) Handbook of composites from renewable materials, physico-chemical and mechanical characterization, vol 3. Wiley, Weinheim, pp 253–270
Evonik. VESTAMID® D-Polyamide 612. http://www.vestamid.com/product/vestamid/en/products-services/vestamid-d/pages/default.aspx. Accessed 24 Jul 2017
RTP Co. NYLON 6/12 (PA) — POLYAMIDE 6/12. https://www.rtpcompany.com/products/product-guide/nylon-612-pa-polyamide-612/. Accessed 24 Jul 2017
Arkema S.A. (2013) Arkema and Addiplast join forces to develop new polyamide compounds. http://www.arkema.com/export/sites/global/.content/medias/downloads/news-attachments/pr-partnership-arkema-addiplast.pdf. Accessed 24 Jul 2017
Mobley DP (1999) Biosynthesis of Long-Chain Dicarboxylic Acid Monomers From Renewable Resources. Final Technical Report No. DE-FC36-95G01 0099. GE Corporate Research and Development, New York, US
Biolon™ DDDA. https://verdezyne.com/industrial/. Accessed 23 Jul 2017
Biangardi H-J (1990) Brill transition of polyamide 6.12. J Polym Sci B Polym Phys 29(2–3):139–153. https://doi.org/10.1080/00222349008245770
Rennovia (2015) Company Overview for BIO Montreal. https://www.bio.org/sites/default/files/WorldCongress/Tom%20Boussie.pdf. Accessed 23 Jul 2017
Castoroil.in (2009) Sebacic Acid. http://www.castoroil.in/castor/castor_seed/castor_oil/sebacic_acid/sebacic_acid.html. Accessed 23 Jul 2017
FKuR. Development – Production – Distribution of biodegradable and biobased polymers. http://fkur.com/en/. Accessed 24 Jul 2017
Castello Italia srl. POLYAMIDE 1012 (PA1012). http://www.castelloitalia.it/polyamidepa10-12/. Accessed 24 Jul 2017
de Guzman D (2013.) https://greenchemicalsblog.com/2013/05/02/solvay-invests-in-bio-based-polyamide-610/. Accessed 24 Jul 2017
Evonik (2014) Evonik polyamide PA1010 quality confirmed through FDA approval. http://corporate.evonik.com/en/media/search/pages/news-details.aspx?newsid=47708. Accessed 24 Jul 2017
DuPont. A comprehensive portfolio of performance nylon resin products http://www.dupont.com/products-and-services/plastics-polymers-resins/thermoplastics/brands/zytel-nylon.html. Accessed 24 Jul 2017
Evonik (2011.) http://root.evonik.com/en/media/search/pages/news-details.aspx?newsid=24139. Accessed 24 Jul 2017
Nikiforov AA, Okhotina NA, Fayzullin IZ, Volfson SI, Rinberg R, Kroll L (2016) Stress-strain properties of composites based on bio-based polyamide 1010 filled with cut fibers. AIP Conference Proceedings 1785(030018). https://doi.org/10.1063/1.4967039
Winnacker M, Rieger B (2016) Biobased polyamides: recent advances in basic and applied research. Macromol Rapid Commun 37(17):1391–1413. https://doi.org/10.1002/marc.201600181
Wang Z, Wei T, Xue X, He M, Xue J, Song M, Wu S, Kang H, Zhang L, Jia Q (2014) Synthesis of fully bio-based polyamides with tunable properties by employing itaconic acid. Polymer 55(19):4846–4856. https://doi.org/10.1016/j.polymer.2014.07.034
Cottereau V (2013) Arkema and Addiplast join forces to develop new polyamide compounds. http://www.arkema.com/en/media/news/news-details/Arkema-and-Addiplast-join-forces-to-develop-new-polyamide-compounds/. Accessed 24 Jul 2017
Quiles-Carrillo L, Montanes N, Boronat T, Balart R, Torres-Giner S (2017) Evaluation of the engineering performance of different bio-based aliphatic homopolyamide tubes prepared by profile extrusion. Polym Test 61:421–429. https://doi.org/10.1016/j.polymertesting.2017.06.004
He J, Samanta S, Selvakumar S, Lattimer J, Ulven C, Sibi M, Bahr J, Chisholm BJ (2013) Polyamides based on the renewable monomer, 1,13-tridecane diamine I: synthesis and characterization of nylon 13,T. Green Mater 1(2):114–124. https://doi.org/10.1680/gmat.12.00021
Samanta S, He J, Selvakumar S, Lattimer J, Ulven C, Sibi M, Bahr J, Chisholm BJ (2013) Polyamides based on the renewable monomer, 1,13-tridecane diamine II: synthesis and characterization of nylon 13,6. Polymer 54:1141–1149
Bechthold I, Bretz K, Kabasci S, Kapitzky R, Springer A (2008) Succinic acid: a new platform chemical for biobased polymers from renewable resources. Chem Eng Technol 31:647–654. https://doi.org/10.1002/ceat.200800063
Kohan MI, Mestemacher SA, Pagilagan RU, Redmond K (2003) Polyamides in Ullmann’s encyclopedia of industrial chemistry. John Wiley & Sons, Weinheim
WhatIs.com. 3-D printing (additive manufacturing). http://whatis.techtarget.com/definition/3-D-printing-rapid-prototyping-stereolighography-or-architectural-modeling. Accessed 26 Jul 2017
Włodarczyk J, Sikorska W, Rydz J, Johnston B, Jiang G, Radecka I, Kowalczuk M (2018) 3D processing of PHA containing (bio)degradable materials. In: Koller M (ed) Current advances in Biopolymer Processing & Characterization. Nova Science Publishers, Hauppauge. under review
3D printing from scratch. 119D Printer Filament Types Overview. http://3dprintingfromscratch.com/common/3d-printer-filament-types-overview/. Accessed 26 Jul 2017
Arkema S.A. RILSAN® POLYAMIDE FAMILY. http://www.orgasolpowders.com/export/sites/orgasolpowders/.content/medias/downloads/literature/2017-Rilsan-Polyamide-Family-GRANULES-Presentation.pdf. Accessed 26 Jul 2017
Arkema S.A. Rilsamid® polyamide 12 resin. http://www.arkema.com/en/products/product-finder/product-viewer/Rilsamid-Polyamide-12-Resin. Accessed 26 Jul 2017
Cruz P, Shoemake ED, Adam P, Leachman J (2015) Tensile strengths of polyamide based 3D printed polymers in liquid nitrogen, Published under licence by IOP Publishing Ltd, IOP Conference Series: Materials Science and Engineering, Vol. 102, conference 1
BASF SE (2016) Polyamide-6 powder opens a new era in 3D printing. https://www.basf.com/cn/en/company/news-and-media/BASF-Information/Innovation/Polyamide-6-powder-opens-a-new-era-in-3D-printing.html. Accessed 26 Jul 2017
Prodways Group. A complete solution for polymer powders for laser sintering. http://www.prodways.com/en/type/plastic-powders/. Accessed 27 Jul 2017
(2017) Ford tests large-scale 3D printing. Metal Powder Report 72(3):208–209. https://doi.org/10.1016/j.mprp.2017.04.015
Brookes KJA (2015) Aviation finds that extra dimension. Metal Powder Report 70(5):239–244. https://doi.org/10.1016/j.mprp.2015.08.077
So KC, Fan Y, Sze L, Kwok KW, Chan AK, Cheung GS, Lee AP (2017) Using multimaterial 3-dimensional printing for personalized planning of complex structural heart disease intervention. JACC Cardiovasc Interv 10(11):e97–e98. https://doi.org/10.1016/j.jcin.2017.02.045
Marcus RP, Morris JM, Matsumoto JM, Alexander AE, Halaweish AF, Kelly JA, Fletcher JG, McCollough CH, Leng S (2017) Implementation of iterative metal artifact reduction in the pre-planning-procedure of three-dimensional physical modeling. 3D Print Med 3(5):8 pages. https://doi.org/10.1186/s41205-017-0013-4
Leng S, McGee K, Morris J, Alexander A, Kuhlmann J, Vrieze T, McCollough CH, Matsumoto J (2017) Anatomic modeling using 3D printing: quality assurance and optimization. 3D Print Med 3(6). https://doi.org/10.1186/s41205-017-0014-3
Dawood A, Marti Marti B, Sauret-Jackson V, Darwood A (2015) 3D printing in dentistry. Br Dent J 219:521–529. https://doi.org/10.1038/sj.bdj.2015.914
Shafiee A, Atala A (2016) Printing technologies for medical applications. Trends Mol Med 22(3):254–265. https://doi.org/10.1016/j.molmed.2016.01.003
Dodziuk H (2016) Applications of 3D printing in healthcare. Pol J Cardio Thorac Surg 13(3):283–293. https://doi.org/10.5114/kitp.2016.62625
Ng W, Zhu L, Law H, Niyomsriskul N (2017) 3D printing. Ipsos Business Consulting. https://www.ipsos.com/sites/default/files/2017-01/Ipsos-Business-Consulting-3D-Printing.pdf. Accessed 27 Jul 2017
Shivali (2016) World’s first 3D printed plane unveiled: Airbus’ windowless ‘Thor’ aircraft could pave the way for cheaper and faster flights. DailyMail. http://www.dailymail.co.uk/sciencetech/article-3627187/World-s-3D-printed-plane-unveiled-Airbus-windowless-Thor-aircraft-pave-way-cheaper-faster-flights.html. Accessed 27 Jul 2017
Mitrus M, Wojtowicz A, Moscicki L (2009) Biodegradable polymers and their practical utility (chapter 1). In: Janssen L, Moscicki L (eds) Thermoplastic starch: a green material for various industries. John Wiley & Sons, Weinheim, pp 1–34
Negoro S (2000) Biodegradation of nylon oliomers. Apply Microbiol Biotechnol 54:461–466. https://doi.org/10.1007/s002530000434
Negoro S (2005) Biodegradation of nylon and other synthetic polyamides. In: Biopolymers online. Wiley, Weinheim
Negoro S, Kakudo S, Okada H (1992) A new nylon oligomer degradation gene (nylC) on plasmid pOAD2 from a Flavobacterium sp. J Bacteriol 174:7948–7953. https://doi.org/10.1128/jb.174.24.7948-7953.1992
Opperman FB, Pickartz S, Steinbuchel A (1998) Biodegradation of polyamides. Polym Degrad Stab 59:337–344. https://doi.org/10.1016/S0141-3910(97)00175-4
Deguchi T, Kitaoka Y, Kakezawa M, Nishida T (1998) Purification and characterization of a nylon-degrading enzyme. Appl Environ Microbiol 64(4):1366–1371
Shama G, Wase DAJ (1981) The biodegradation of ε-caprolactam and some related compounds: a review. Int Biodeterioration Bull 17:1–16
Vert M, Doi Y, Hellwich K-H, Hess M, Hodge P, Kubisa P, Rinaudo M, Schué F (2012) Terminology for biorelated polymers and applications (IUPAC recommendations 2012). Pure Appl Chem 84(2):377–410. https://doi.org/10.1351/PAC-REC-10-12-04
Tokiwa Y, Calabia BP, Ugwu CU, Aiba S (2009) Biodegradability of plastics. Int J Mol Sci 10:3722–3742. https://doi.org/10.3390/ijms10093722
Tomita K, Ikeda N, Ueno A (2003) Isolation and characterization of a thermophilic bacterium, Geobacillus thermocatenulatus, degrading nylon 12 and nylon 66. Biotechnol Lett 25:1743–1746. https://doi.org/10.1023/A:1026091711130
Sudhakar M, Priyadarshini C, Doble M, Murthy PS, Venkatesan R (2007) Marine bacteria mediated degradation of nylon 66 and 6. Int Biodeterior Biodegradation 60(3):144–151. https://doi.org/10.1016/j.ibiod.2007.02.002
Deguchi T, Kakezawa M, Nishida T (1997) Nylon biodegradation by lignin-degrading fungi. Appl Environ Microbiol 63:329–331
Nomura N, Deguchi T, Shigeno-Akutsu Y, Nakajima-Kambe T, Nakahara T (2001) Gene structures and catalytic mechanisms of microbial enzymes able to biodegrade the synthetic solid polymers nylon and polyester polyurethane. Biotechnol Genet Eng Rev 18:125–147. https://doi.org/10.1080/02648725.2001.10648011
Tomita K, Hayashi N, Ikeda N, Kikuchi Y (2003) Isolation of a thermophilic bacterium degrading some nylons. Polym Degrad Stab 81:511–514. https://doi.org/10.1016/S0141-3910(03)00151-4
Mohanty AK, Misra M, Hinrichsen G (2000) Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 276-277(1):1–24. https://doi.org/10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W
Shonnard D, Lindner A, Nguyen N, Ramachandran PA, Fichana D, Hesketh R, Slater CS, Engler R (2012) Green engineering-integration of green chemistry, pollution prevention, and risk-based considerations. In: Kent JA (ed) Handbook of industrial chemistry and biotechnology, vol 1. Springer, New York, pp 155–199
Rydz J, Zawidlak-Węgrzyńska B, Christova D (2015) Degradable polymers. In: Mishra MK (ed) Encyclopedia of biomedical polymers and polymeric biomaterials. CRC Press, Boca Raton, pp 2327–2349
Rydz J, Musioł M, Kowalczuk M (2017) Polymers tailored for controlled (bio)degradation through end-group and in-chain functionalization. Curr Org Synth 14(6). https://doi.org/10.2174/1570179414666161115151634
Winnacker M, Rieger B (2016) Poly(ester amide)s: recent insights into synthesis, stability and biomedical applications. Polym Chem 7:7039–7046. https://doi.org/10.1039/C6PY01783E
Toncheva-Moncheva N, Jerome R, Mateva R (2016) Impact of the structure of poly(ε-caprolactam) containing polyesteramides on mechanical properties and biodegradation. Polym Degrad Stab 123:170–177. https://doi.org/10.1016/j.polymdegradstab.2015.11.023
Narayan R (2008) Bioplastics or biobased (renewable) plastic materials 101 in Q & A format. https://knowledge.ulprospector.com/1338/pe-bioplastics-biobased-narayan/. Accessed 28 Jul 2017
(2016) Nylon Resins. Chemical Economics Handbook. https://www.ihs.com/products/nylon-resins-chemical-economics-handbook.html. Accessed 28 Jul 2017
Klun U, Friedrich J, Kržan A (2003) Polyamide-6 fibre degradation by a lignolytic fungus. Polym Degrad Stab 79(1):99–104. https://doi.org/10.1016/S0141-3910(02)00260-4
Irfan D, Prijambada ID, Negro S, Yomo T, Urabe I (1995) Emergence of nylon oligomer degradation enzymes in Pseudomonas Aeruginosa PAO through experimental evolution. Appl Environ Microbiol 61:2020–2022
Kanagawa K, Oishi M, Negoro S, Urabe I, Okada H (1993) Characterization of the 6-aminohexanoate-dimer hydrolase from pseudomonas sp. NK87. J Gen Microbiol 139:787–795. https://doi.org/10.1099/00221287-139-4-787
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this entry
Cite this entry
Kyulavska, M., Toncheva-Moncheva, N., Rydz, J. (2017). Biobased Polyamide Ecomaterials and Their Susceptibility to Biodegradation. In: Martínez, L., Kharissova, O., Kharisov, B. (eds) Handbook of Ecomaterials. Springer, Cham. https://doi.org/10.1007/978-3-319-48281-1_126-1
Download citation
DOI: https://doi.org/10.1007/978-3-319-48281-1_126-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48281-1
Online ISBN: 978-3-319-48281-1
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering