Abstract
This paper describes function of the mechanism of the hammer drill and solving the impact analysis and determining the contact pressure between the parts of the mechanism. The computational model was created by Creo Parametric 2.0., simulation of dynamic effect by the module Mechanism and stress simulation by the module Simulate.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Reference
Medvec, A., Stradiot, J., Záhorec, O., Caban, S.: Mechanics III Dynamic, Bratislava SNTL (1988)
Acknowledgments
This publication was written at the Technical University of Liberec, Faculty of Mechanical Engineering with the support of the Institutional Endowment for the Long Term Conceptual Development of Research Institutes, as provided by the Ministry of Education, Youth and Sports of the Czech Republic.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this paper
Cite this paper
Konečný, M. (2017). Analysis of the Mechanism of the Drill Hammer. In: Beran, J., Bílek, M., Žabka, P. (eds) Advances in Mechanism Design II. Mechanisms and Machine Science, vol 44. Springer, Cham. https://doi.org/10.1007/978-3-319-44087-3_20
Download citation
DOI: https://doi.org/10.1007/978-3-319-44087-3_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-44086-6
Online ISBN: 978-3-319-44087-3
eBook Packages: EngineeringEngineering (R0)