Abstract
The design principle of the new probe technology is introduced. The calculation of a point cloud defining the transducer shape is discussed in detail. Necessary adaptations are taken into account. The new angle beam probes generate rotationally symmetric sound fields as expected. The DGS accuracy in the working range defined in the EN ISO 16811:2011 is significantly better than the accuracy achieved with traditional angle beam probes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
trueDGS ® is a registered trademark of GE Sensing & Inspection Technologies GmbH.
References
Krautkramer, J., Krautkramer, H.: Ultrasonic testing of materials. 4th Fully Revised Edition Translation of the 5th Revised German Edition. Springer, Heidelberg GmbH (1990)
Lavrentyev, A.I., Rokhlin, S.I.: Phase correction for ultrasonic bulk wave measurement of elastic constants in anisotropic materials. In: Thompson, D.O., Chimenti, D.E. (eds.) Review of Progress in Quantitative Nondestructive Evaluation. Plenum Press, New York (1997)
Wüstenberg H.: Untersuchungen zum Schallfeld von Winkelprüfköpfen für die Materialprüfung mit Ultraschall, Dissertation, BAM-Berichte Nr. 27, Berlin, August 1974
Schmitte T., Orth T., Spies M., Kersting T.: Schallfelder von Phased-Array Prüfköpfen: Vergleich von photoelastischen Messungen und Simulationen, DACH-Jahrestagung 2012, Graz
Kleinert W., Oberdörfer Y.: Präzise AVG-Bewertung mit Gruppenstrahler-Winkelprüfköpfen für alle Winkel DGZfP-Jahrestagung 2014, Potsdam. http://www.ndt.net/article/dgzfp2014/papers/p44.pdf
Kleinert W., Oberdörfer Y., Splitt G.: The Ideal Angle Beam Probe for DGS Evaluation, 10th ECNDT, Moskau (2010). http://www.ndt.net/article/ecndt2010/reports/1_03_64.pdf
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Kleinert, W. (2016). The New Probe Technology, Single Element Probes. In: Defect Sizing Using Non-destructive Ultrasonic Testing. Springer, Cham. https://doi.org/10.1007/978-3-319-32836-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-32836-2_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-32834-8
Online ISBN: 978-3-319-32836-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)