Abstract
One key element of a chipless RFID system is the tag. Since it is chipless, it acts both as the scatterer and encoder. As the scatterer, it needs to reradiate the incident field as much as possible in order to maximize signal-to-noise ratio (SNR) in the reader. As the encoder, it needs to encode a high density of data on the backscattered signal. There are some challenges in attaining all desired characteristics of the tag as the scatterer and encoder altogether. Although many designs have been proposed as chipless RFID tags, they can be categorized into two general groups [1].
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Preradovic S, Karmakar NC (2010) Chipless RFID: barcode of the future. IEEE Microw Mag 11(7):87–97
Hartmann CS (2002) A global SAW ID tag with large data capacity. IEEE Proceedings, ultrasonics symposium, pp 65–69
Blischak AT, Manteghi M (2011) Embedded Singularity Chipless RFID Tags. IEEE Trans Antennas Propag 59:3961–3968
Varahramyan CA (2006) Transmission delay line based ID generation circuit for RFID applications. IEEE Microw Wirel Compon Lett 16(11):588–590
Vemagiri J, Chamarti A, Agarwal M, Varahramayan K (2007) Transmission line delay-line radio frequency identification (RFID) tag. Microw Opt Technol Lett 49(8):1900–1904
Gupta S, Nikfal B, Caloz C (2011) Chipless RFID system based on group delay engineered dispersive delay structures. IEEE Antennas Propag Lett 10:1366–1368
Rezaiesarlak R, Manteghi M (2014) Complex-natural-resonance-based design of chipless RFID tag for high-density data. IEEE Trans Antennas Propag 62(2):898–904
Rezaiesarlak R, Manteghi M (2013) A low profile multi-bit chipless RFID tag. USNC-URSI meeting
Jalali I, Robertson ID (2005) Capacitively-tuned split microstrip resonators for RFID barcodes. European microwave conference
McVay J, Hoofer A, Engheta N (2006) Space-filling curve RFID tags. IEEE radio and wireless symposium, pp 199–202
Manteghi M, Rahmat-Samii Y (2007) Frequency notched UWB elliptical dipole tag with multi-bit data scattering properties. In Antennas and Propagation Society International Symposium, pp 789–792
Preradovic S, Balbin I, Karmakar NC, Swiegers GF (2009) Multiresonator-based chipless RFID system for low-cost item tracking. IEEE Trans Microw Theory Tech 57(5):1411–1419
Costa F, Genovesi S, Monorchio A (2013) A chipless RFID based on multiresonant high-impedance surfaces. IEEE Trans Microw Theory Tech 61(1):146–153
Rezaiesarlak R, Manteghi M (2014) On the application of characteristic modes for the design of chipless RFID tags. APS/URSI 2014, Memphis, TN
Vena A, Perret E, Tedjini S (2012) Design of compact and auto-compensated single-layer chipless RFID tag. IEEE Trans Microw Theory Tech 60:2913–2924
Baum CE (ed) (1997) Detection and identification of visually obscured targets. Taylor & Francis, Philadelphia, PA
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Rezaiesarlak, R., Manteghi, M. (2015). Chipless RFID Tag. In: Chipless RFID. Springer, Cham. https://doi.org/10.1007/978-3-319-10169-9_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-10169-9_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-10168-2
Online ISBN: 978-3-319-10169-9
eBook Packages: EngineeringEngineering (R0)