Abstract
The article proposes a concept of transforming the existing Product Lifecycle Management System (PLM-System) into a Cyber-Physical System for the production and management of an enterprise (in an extended meaning of this term). The concept is based on the study of interaction of product development systems with decision making about the feasibility of transferring relevant processes into an automated digitalization mode. When implementing transformation of a PLM-System into a Cyber-Physical System, it is necessary to investigate the business-processes of the enterprise by developing appropriate models briefly described in the paper. Such transformation, based on introduction of emerging technologies, can be used as the basis for creating a cyber-physical system for managing the entire process lifecycle of the enterprise from a job order and organization of production process to product delivery and support.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lee, E.A., Seshia, S.A.: Introduction to Embedded Systems. A Cyber-Physical Systems Approach. LeeSeshia.org (2011)
Colombo, A., Bangemann, T.: Industrial Cloud-Based Cyber-Physical Systems: The IMC-AESOP Approach, 245 p. Springer, Cham (2014)
Kupriyanovskiy, V.P., Namiot, D.E., Sinyagov, S.A.: Cyber-physical systems as the basis of the digital economy [Kiberfizicheskiye sistemy kak osnova tsifrovoy ekonomiki]. Int. J. Open Inf. Technol. 4(2), 18–25 (2016). ISSN: 2307-8162. (in Russian)
Dobrynin, A.P., et al.: Digital economy - various ways to efficiently apply technology. (BIM, PLM, CAD, IOT, Smart City, BIG DATA etc.) [Tsifrovaya ekonomika - razlichnyye puti k effektivnomu primeneniyu tekhnologiy (BIM, PLM, CAD, IOT, Smart City, BIG DATA i dr.)]. Int. J. Open Inf. Technol. 4(1), 4–11 (2016). (in Russian)
Namiot, D.: On Big Data stream processing. Int. J. Open Inf. Technol. 3(8), 48–51 (2015)
Lee, E.A.: The Past, Present and Future of Cyber-Physical Systems: A Focus on Models. https://citeweb.info/20150013436
Lee, E.: Cyber physical systems: design challenges, University of California, Berkeley, Technical Report No. UCB/EECS-2008-8, 23 January 2008 (2008). https://www2.eecs.berkeley.edu/Pubs/TechRpts/2008/EECS-2008-8.pdf
Zhuge, H.: Cyber-physical society. In: Materials of the 1st Workshop on Cyber Physical Society, in conjunction with the 6th International Conference on Semantics, Knowledge and Grids, Ningbo, China (2010)
The Cyber-Physical Society website. http://www.knowledgegrid.net/~H.Zhuge/CPS.htm
Zhuge, H.: Socio-natural thought semantic link network: a method of semantic networking in the cyber physical Society. Keynote at IEEE AINA 2010, Proceedings of the 24th IEEE Advanced Information Networking and Applications, Perth, Australia, 20–23 April 2010, pp. 19–26 (2010)
Schwab, K.: The Fourth Industrial Revolution. Portfolio/Penguin, 184 p. (2017)
Schwab, K., Devis, T.: Shaping The Fourth Industrial Revolution [Tekhnologii chetvertoy prpomyshlennoy revolyutsii]. “E” Publ., Moscow, 320 p. (2018). (in Russian)
Chernyak, L.: The Internet of Things: new challenges and new technologies. Open Syst. J. DBMS 4, 14–18 (2013). http://www.osp.ru/os/2013/04/13035551
Questions of philosophy [Voprosy philosofii] 6, 62–78 (1980). (in Russian)
Masyutin, S.A.: Enterprise strategy in the transition to “Industry 4.0” [Strategiya predpriyatiya pri perekhode k “Industrii 4.0”]. PLM.pw›2016/09/The-6-Factors-of-Industry-4.0.html (2016). (in Russian)
Emerging Technologies. HuffPost/huffingtonpost.com›topic/emerging-technologies
Emerging Technologies, Deloitte Insights. https://www2.deloitte.com/insights/us/en/tags/emerging-technologies.html
L’vov, D.S., Glaz’ev, S.Yu.: Theoretical and applied aspects of scientific and technological progress management [Teoreticheskie i prikladnye aspekty upravleniya NTP]. J. Econ. Math. Methods [Ekonomika i matematicheskie metody] 5, 793–804 (1986). (in Russian)
Rifkin, J.: The Third Industrial Revolution: How Lateral Power Is Transforming Energy, the Economy, and the World, 304 p. St. Martin’s Press, N. Y., USA (2011)
Volkova, V.N., Vasiliev, A.Y., Efremov, A.A., Loginova, A.V.: information technologies to support decision-making in the engineering and control. In: Proceedings of 2017 20th IEEE International Conference on Soft Computing and Measurements (SCM 2017), St. Petersburg, Russia, pp. 727–730 (2017)
Volkova, V.N., Efremov, A.A. (eds.): Information Technology In Control Systems. [Informatsionnyye tekhnologii v sisteme upravleniya.], 408 p. St. Petersburg Polytechnic University Publishing House (2017). (in Russian)
Volkova, V.N., Kozlov, V.N. (eds.): Modeling systems and processes [Modelirovanie sistem i protsessov], 450 p. “Yurait” Publishing House, Moscow (2016). (in Russian)
Volkova, V.N., Gorelova, G.V., Efremov, A.A., et al.: Modeling systems and processes: practicum [Modelirovanie sistem i protsessov. Praktikum]. In: Volkova, V.N. (ed.) “Yurait” Publishing House, Moscow, 295 p. (2016). (in Russian)
Volkova, V.N., Loginova, A.V., Yakovleva Ye., A., et al.: Models of innovation management of enterprises and organizations [Modeli upravleniya innovatsionnoy deyatel’nost’yu predpriyatiy i organizatsiy], 246 p. St. Petersburg Polytechnic University Publishing House (2014). (in Russian)
Volkova, V.N., Loginova, A.V., Leonova, A.Ye., Chernyy, Yu.Yu.: Approach to comparative analysis and selection of technological innovations of the third and fourth industrial revolutions [Podkhod k sravnitel’nomu analizu i vyboru tekhnologicheskikh innovatsiy tret’yey i chetvertoy promyshlennykh revolyutsiy]. In: Proceedings of 2018 21st IEEE International Conference on Soft Computing and Measurements (SCM 2018), 23–25 May 2018, St. Petersburg, Russia, pp. 373–376 (2018). (in Russian)
Volkova, V.N., Kudryavtseva, A.S.: Models for managing the innovation activities of industrial enterprises [Modeli dlya upravleniya innovatsionnoy deyatel’nost’yu promyshlennogo predpriyatiya]. Open Educ. J. [Otkrytoye obrazovaniye] 22(4), 64–73 (2018). https://doi.org/10.21686/1818-4243-2018-4-64-73. (in Russian)
Kudryavtseva, A.S.: Models for the management of industrial enterprises in the implementation of technological innovations [Modeli dlya upravleniya innovatsionnoy deyatel’nost’yu promyshlennogo predpriyatiya prI vnedreniyi tekhnologicheskikh innovatsiy]. In: Proceedings of 22th International Scientific Practical Conference on System Analysis in Engineering and Control, Part 1, pp. 389–398. Polytechnic University Publishing House, St. Petersburg (2018). (in Russian)
Volkova, V.N., Kozlov, V.N., Karlik, A.E., Iakovleva, E.A.: The impact of NBIC-technology development on engineering and management personnel training. Strat. Partn. Ship Univ. Enterp. Hi-Tech Branches. (Sci., Educ. Innov.) 6, 51–54 (2018)
Volkova, V.N., Kozlov V.N., Mager, V.E., Chernenkaya, L.V.: Classification of methods and models in system analysis. In: Proceedings of the 20th IEEE International Conference on Soft Computing and Measurements (SCM 2017), St. Petersburg, Russia, pp. 183–186 (2017)
Volkova, V.N., Denisov, A.A.: Methods of the procedures of complicated expertise organization [Metody organizatsii slozhnoy ekspertizy.], 128 p. Publishing House of St. Petersburg Polytechnic University (2010). (in Russian)
Volkova, V.N., et al.: Problems of sustainable development of socio-economic systems in the implementation of innovations. In: Proceedings of the 3rd International Conference on Human Factors in Complex Technical Systems and Environments (Ergo 2018), St. Petersburg, Russia, pp. 53–56 (2018)
Volkova, V.N., Lankin, V.Ye.: The problem of the sustainability of the socio-economic system in the context of innovation of the Fourth industrial revolution [Problema ustoychivosti sotsial’no-ekonomicheskoy sistemy v usloviyakh vnedreniya innovatsiy chetvertoy promyshlennoy revolyutsii]. Sci. Pract. J Econ. Manag. Probl. Solut. [Nauchno-prakticheskiy zhurnal “Ekonomika i upravleniye: problemy i resheniya”] 7(77), 25–29 (2018). (in Russian)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Leonova, A.E., Karpov, V.I., Chernyy, Y.Y., Romanova, E.V. (2020). Transformation PLM-Systems into the Cyber-Physical Systems for the Information Provision for Enterprise Management. In: Arseniev, D., Overmeyer, L., Kälviäinen, H., Katalinić, B. (eds) Cyber-Physical Systems and Control. CPS&C 2019. Lecture Notes in Networks and Systems, vol 95. Springer, Cham. https://doi.org/10.1007/978-3-030-34983-7_42
Download citation
DOI: https://doi.org/10.1007/978-3-030-34983-7_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-34982-0
Online ISBN: 978-3-030-34983-7
eBook Packages: EngineeringEngineering (R0)