Abstract
This paper establishes a reference set of those low cost digital solutions needed by small and medium sized manufacturers – SMEs – and proposes a method for determining development priorities using input from reference groups of SMEs. The paper describes the approach taken to identifying and classifying common digital solutions used in manufacturing and the results from a series of workshops in which company representatives prioritise different solution types to help guide developments.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bi, Z., Liu, Y., Baumgartner, B., Culver, E., Sorokin, J., Peters, A., Cox, B., Hunnicutt, J., Yurek, J., O’Shaughnessey, S.: Reusing industrial robots to achieve sustainability in small and medium-sized enterprises (SMEs). Ind. Robot: an Int. J. 42(3), 264–273 (2015). https://doi.org/10.1108/IR-12-2014-0441. http://www.emeraldinsight.com/doi/10.1108/IR-12-2014-0441
Brunoe, T.D., Nielsen, K.: Complexity management in mass customization SMEs. Procedia CIRP 51, 38–43 (2016). https://doi.org/10.1016/j.procir.2016.05.099
CBI: From Ostrich to Magpie - Increasing Business Take-up of Proven Ideas and Technologies. Technical report, November 2017. https://www.cbi.org.uk/articles/from-ostrich-to-magpie-increasing-business-take-up-of-proven-ideas-and-technologies/
Ciliberti, F., Pontrandolfo, P., Scozzi, B.: Investigating corporate social responsibility in supply chains: a SME perspective. J. Cleaner Prod. 16(15), 1579–1588 (2008). https://doi.org/10.1016/j.jclepro.2008.04.016
Digitalshoestring.net: Digital Manufacturing on a Shoestring (2019). https://www.digitalshoestring.net
EPSRC: EPSRC Details of Grant [Digital Shoestring] (2018). https://gow.epsrc.ukri.org/NGBOViewGrant.aspx?GrantRef=EP/R032777/1
Ford, D., Caldwell, P., Stevens, T.: A new diagnostic and action planning tool for small and medium-sized manufacturers. In: 3rd International Conference for Manufacturing Research, ICMR 2005, Cranfield (2005)
Ford, D., Caldwell, P., Stevens, T.: In-site: the development of a new diagnostic and action planning tool for small and medium-sized manufacturers. In: 7th International Conference on Stimulating Manufacturing Excellence in Small and Medium Enterprises, Glasgow, pp. 252–259 (2005)
Goerzig, D., Lucke, D., Lenz, J., Denner, T., Lickefett, M., Bauernhansl, T.: Engineering environment for production system planning in small and medium enterprises. Procedia CIRP 33, 111–114 (2015). https://doi.org/10.1016/j.procir.2015.06.021
Grube Hansen, D., Malik, A.A., Bilberg, A.: Generic challenges and automation solutions in manufacturing SMEs. In: 28th DAAAM International Symposium on Intelligent Manufacturing and Automation, pp. 1161–1169 (2017). https://doi.org/10.2507/28th.daaam.proceedings.161. http://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2017/161.pdf
House of Commons: Small businesses and productivity Fifteenth Report of Session 2017-19 HC 807. Technical report (2018). https://publications.parliament.uk/pa/cm201719/cmselect/cmbeis/807/807.pdf
Matt, D.T., Rauch, E.: Implementation of lean production in small sized enterprises. Procedia CIRP 12, 420–425 (2013). https://doi.org/10.1016/j.procir.2013.09.072
McFarlane, D., Ratchev, S., Thorne, A., Parlikad, A., de Silva, L., Schönfuß, B., Hawkridge, G., Terrazas, G., Tlegenov, Y.: Digital manufacturing on a shoestring: low cost digital solutions for SMEs. In: SOHOMA (2019, submitted)
Publications Office of the European Union: User Guide to the SME Definition (2015). http://ec.europa.eu/regional_policy/sources/conferences/state-aid/sme/smedefinitionguide_en.pdf
Rhodes, C.: Business statistics - HoC briefing paper, Dec 2018. Technical report 1 (2018). https://doi.org/10.1111/j.1467-9922.2009.00554.x. http://researchbriefings.files.parliament.uk/documents/SN06152/SN06152.pdf
Saam, M., Viete, S., Schiel, S.: Digitalisierung im Mittelstand: Status Quo, aktuelle Entwicklungen und Herausforderungen: Forschungsprojekt im Auftrag der KfW Bankengruppe. Technical report (2016). https://www.kfw.de/PDF/Download-Center/Konzernthemen/Research/PDF-Dokumente-Studien-und-Materialien/Digitalisierung-im-Mittelstand.pdf
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Schönfuß, B., McFarlane, D., Athanassopoulou, N., Salter, L., de Silva, L., Ratchev, S. (2020). Prioritising Low Cost Digital Solutions Required by Manufacturing SMEs: A Shoestring Approach. In: Borangiu, T., Trentesaux, D., Leitão, P., Giret Boggino, A., Botti, V. (eds) Service Oriented, Holonic and Multi-agent Manufacturing Systems for Industry of the Future. SOHOMA 2019. Studies in Computational Intelligence, vol 853. Springer, Cham. https://doi.org/10.1007/978-3-030-27477-1_22
Download citation
DOI: https://doi.org/10.1007/978-3-030-27477-1_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27476-4
Online ISBN: 978-3-030-27477-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)