Abstract
Traditional design method of 3 d mechanical parts to complete the design of mechanical parts, but lack of existing design cycle is long, not suitable for mechanical three-dimensional rapid design of the parts and components for manufacturing oriented network collaborative 3 d mechanical parts rapid design technology. Using three-dimensional mechanical parts the construction of the collaborative design platform, and the determination of network collaborative design principle based on the establishment of network collaborative design data transfer mode to complete network collaborative construction of three-dimensional mechanical model of rapid design components; Web-based collaborative design task decomposition, and the conflict of network collaborative design solutions, relying on the online conflict detection, access control, ORG connecting key technology to realize network collaborative 3 d mechanical parts rapid design. Experimental data show that the proposed rapid design technology compared with traditional design, shorten the design cycle by 84.41%, at the same time to ensure accuracy, good design is suitable for mechanical 3 d parts of rapid design.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Fan, Y., Liu, C., Wu, H., et al.: Full-scale 3D model-driven complex product intelligent manufacturing. Comput. Integr. Manuf. Syst. 23(6), 1176–1186 (2017)
Lai, X., Yang, Z., Xia, R., et al.: Research on remote two-way cooperative manufacturing system of mining machinery parts and components. Min. Res. Dev. 1, 109–112 (2018)
Huang, L., Zeng, H., Chen, P.: A three-dimensional point-to-point hierarchical scheduling algorithm for power collaborative simulation design. China Rural Water Hydropower 2016(3), 171–174 (2016)
Li, Z., Zhang, F., Wuming, S., et al.: 3D cooperative design of civil 3D and infraworks in general map specialty. Oil Gas Storage Transp. 35(6), 648–652 (2016)
Lvbei, S., Wang, Z., Yang, X., et al.: Research on control technology of integration maturity for aircraft design and manufacturing. Mech. Des. Manufact. 12, 262–264 (2017)
Wu, M., Zhu, J., Yang, K., et al.: A collaborative optimization design method for precise deformation of piezoelectric smart structures. 49(2), 380–389 (2017)
Ping, M., Liang, S., Hui, L., et al.: Cooperative behavior pattern mining method based on dynamic supply chain network. Comput. Integr. Manufact. Syst. 22(2), 324–329 (2016)
Yang, Y., Linfu, S., Hua, M.: Multi-tenant form customization technology for industrial chain collaborative cloud service platform. Comput. Integr. Manufact. Syst. 22(9), 2235–2244 (2016)
Zhao, T., Cao, Z., Qiu, M.: Familiar production forecasting method for semiconductor production line based on MAS fuzzy coordination. Comput. Integr. Manufact. Syst. 23(4), 852–859 (2017)
Zeng, H., Liang, H., Chen, P.: Power collaborative simulation design method based on mixed reality technology. China Rural Water Hydropower 36(1), 158–160 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Chen, Y. (2019). Manufacturing-Oriented Network Collaboration 3D Mechanical Components Rapid Design Technology. In: Liu, S., Yang, G. (eds) Advanced Hybrid Information Processing. ADHIP 2018. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 279. Springer, Cham. https://doi.org/10.1007/978-3-030-19086-6_33
Download citation
DOI: https://doi.org/10.1007/978-3-030-19086-6_33
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-19085-9
Online ISBN: 978-3-030-19086-6
eBook Packages: Computer ScienceComputer Science (R0)