Abstract
This paper presents an automated system as a solution to the 100% control of manufactured parts in a FMS environment. The technique used is based on comparison between pictures acquired through a vision system and the corresponding data gained from a CAD system. Comparison takes place as well at feature level than at image level. All kind of inspections, ranging from conformity checking up to metrology, can be achieved through use of a user friendly planning system. The paper is based on work of ESPRIT Project P2091 “VIMP”.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Sutherland T.E., Sproul R.F., Schumacker R.A., ACM Computing Surveys, Vol 6, No 1, 1974.
Schlechtendahl E.G. (Ed.), “ Specification of CAD I neutral file for CAD geometry, version 3.3 ”, Research report, Vol. 1, Springer Verlag, 1988.
Paul D., Hättich W., Nill W., Tatari S., Winkler G., IEEE Transactions–PAMI, Vol. 10, N. 3, 1988, pp 399–407.
Perucca G., Giorcelli S., De Couasnon T., Hirsch E., Mangold H., “Advanced algorithms and architectures for speech and image processing ”, in “putting Technology to use ”, CECIDGXIII Ed., North-Holland, 1988, pp 543–561.
Pierre F., Herve Y., Eugene F., Draman C., Wendling S.,Proc. of 2th PIXIM Conference, Paris, 1988.
Technical Annex of ESPRIT Project P2091 “VIMP”, 1988.
Anderl R., Schmitt M, Schmitt M., “ State of the art of interfaces for the exchange of product model data in industrial applications ”, CEN/CENELEC/AMT/WG STEP 8, december 1989.
Gasvik K.J., Hovde T., Vadseh T., Proc. 5th Cim-Europe Conference, Halatsis C. and Torres J. Eds., IFS Publications, Springer Verlag, 1989, pp 301–308.
Morshedizadeh M.R., Wykes C.M., J. Phys. E: Sci. Instrum., Vol. 22, 1989, pp 88–92.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1990 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Hirsch, E., Lübbert, U. (1990). Vision Based Online Inspection of Manufactured Parts: Comparison of CCD and CAD Images. In: Faria, L., Van Puymbroeck, W. (eds) Computer Integrated Manufacturing. Springer, London. https://doi.org/10.1007/978-1-4471-1786-5_7
Download citation
DOI: https://doi.org/10.1007/978-1-4471-1786-5_7
Publisher Name: Springer, London
Print ISBN: 978-3-540-19616-7
Online ISBN: 978-1-4471-1786-5
eBook Packages: Springer Book Archive