Abstract
In the case of internal gears, the contact stress along the gearing line has a specific variation. Since ISO standard is recommending the contact stress calculus in the pitch point C or in one of the inner points of single pair tooth contact B or D, without any details on how important are the differences, this paper is analysing the influence of addendum modification, pinion number of teeth and gear ratio on the position of the single pair tooth segment relative to the pitch point and on the maximum contact stress, for internal gears.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
ISO 6336-1: 1996 (E). Calculation of load capacity of spur and helical gears. Part 1: Basic principles, introduction and general influence factors.
ISO 6336-2: 1996 (E). Calculation of load capacity of spur and helical gears. Part 2: Calculation of surface durability (pitting
Chişu, E., Moldovean, Gh. On the influence of gear ratios and addendum corrections over the contact stress. In Bulletin of the Transilvania University of Braşov, vol. 12(47) New Series, Series A, pages 25–28, 2005.
Velicu, R., Moldovean, Gh. Angrenaje cilindrice. Reductoare cilindrice. (Cylindrical gears. Cylindrical speed reducers.) Ed. Universităţii “Transilvania” din Braşov, 2002.
Moldovean, Gh., Velicu, R., Velicu, D. On the maximal contact stress point for cylindrical gears, 12th IFToMM World Congress, Besançon (France), June 18–21, 2007.
Moldovean, Gh., Velicu, D., Velicu, R. et al. Angrenaje cilindrice şi conice, Calcul şi construcţie. (Cylindrical and bevel gears. Calculus and constructions.) Lux Libris, Braşov, 2001.
Deaky, B. A., Gavrila, C. C. Influenţa deplasarilor de profil asupra scurtarii dinţilor angrenajelor cilindrice (Influence of addendum modifications on tooth truncation on cylindrical gears). Proc. of Conference Prasic 2006, Braşov, Romania.
Eiff, H., Hirschmann, K. H., Lechner, G. Influence of gear tooth geometry on tooth stress of external and internal gears. În Journal of Mechanical Design. Transactions of the ASME, Vol. 112, pages 575–583, 1990.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer Science+Business Media B.V.
About this paper
Cite this paper
Velicu, R., Moldovean, G., Bozan, C.A. (2009). On the Position of the Single Pair Tooth Segment Relative to the Pitch Point, for Internal Gears, with Effect on Contact Stress Calculus. In: Ceccarelli, M. (eds) Proceedings of EUCOMES 08. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-8915-2_49
Download citation
DOI: https://doi.org/10.1007/978-1-4020-8915-2_49
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-8914-5
Online ISBN: 978-1-4020-8915-2
eBook Packages: EngineeringEngineering (R0)