Abstract
The structure-deformation/failure process-mechanical property relations of epoxies used as matrices in high performance fibrous composites are presented. Such composites are fabricated either from carbon fiber-epoxy prepregs or by filament winding. The parameters that affect the processing, cure reactions and the resultant chemical and physical structure of the epoxies are discussed. The deformation and failure processes of these glasses are described. The structural parameters that control the deformation and failure processes, the mechanical response and aging of epoxies are addressed and means of improving their processing and performance are described.
This work performed under the auspices of the U. S. Department of Energy by the Lawrence Liver-more National Laboratory under Contract W-7405-Eng-48
Preview
Unable to display preview. Download preview PDF.
10 References
Morgan, R. J., Kong, F. M., Walkup, C. M.: Polymer 25, 375 (1984)
Morgan, R. J. et al.: Proc. 12th National SAMPE Tech. Conf. p. 368–379 (1980)
Pruneda, C. O. et al.: Proc. 29th National SAMPE Symp. p. 1213–1222 (1984)
Rinde, J. A. et al. Composites Tech. Rev. 1 (2), 4 (1979)
Morgan, R. J. et al.: Development of Epoxy Matrices for Filament-Wound Graphite Structures, Proc. 30th National SAMPE Symp. p. 1209–1220, LLNL Report, UCRL-90946 (1984)
May, C. A.: Exploratory Development of Chemical Quality Assurance and Composition of Epoxy Formulations, Air Force Materials Laboratory Report, AFML-TR-76-112 (1976)
Carpenter, J. F.: Quality Control of Structural Non-Metallics, McDonnell Aircraft Report, Contract No. NOOO19-76-C-0138 (1977)
Trujillo, R. E., Engler, B. P.: Chemical Characterization of Composite Prepreg Resins, Part 1, Sandia Laboratory Report, SAND 78-1504 (1978)
Mones, E. T., Morgan, R. J., Polymer Preprints, ACS, 22, No. 2, 249 (1981)
Mones, E. T. et al.: Proc. of 14th National SAMPE Tech. Conf. p. 89–100 (1982)
Morgan, R. J., Happe, J. A., Mones, E. T.: Proc. of 28th National SAMPE Symp. p. 596–607 (1983)
Wolf, C. J., Grayson, M. A.: McDonnell-Douglas Research Laboratories, Private Communication
Pearce, P. J., Davidson, R. G., Morris, C. E. M.: J. Appl. Polym. Sci., 26, 2363 (1981)
Hagnauer, G. L. and Pearce, P. J.: in Epoxy Resin Chemistry, II, Bauer, R. S. (ed.): ACS Symp. Series, 221, Ch. 10, (1983)
Scola, D. A.: Proc. of 15th National SAMPE Tech. Conf., p. 9–20 (1983)
Morgan, R. J., Walkup, C. M., Hoheisel, T. H.: Differential Scanning Calorimetry Studies of the Cure of Carbon Fiber-Epoxy Composite Prepregs, J. Appl. Polym. Sci., 30, 289 (1985)
Happe, J. A., Morgan, R. J., Walkup, C. M.: 1H, 19F and 11B Nuclear Magnetic Resonance Characterization of BF3: Amine Catalysts Used in the Cure of C Fiber-Epoxy Prepregs, Polymer (In press)
Harris, J. A., Temin, S. C.: J. Appl. Polym. Sci. 10, 523 (1966)
Landua, A. J.: Polymer Preprints, ACS, 24, 299 (1964)
Kaelble, D. H.: in Resins for Aerospace ACS Symposium Series 132, Editor C. A. May, ACS, Washington, D.C., Ch. 29 (1980)
Cizmecioglu, M., Gupta, A.: SAMPE Quarterly, 13, No. 2, 16 (1982)
Gupta, A. et al.: J. Appl. Polym. Sci., 27, 1011 (1983)
May, C. A. et al.: Organic Coatings Appl. Polym. Sci. Proc. 47, 419 (1982)
Lee, H. and Neville, K.: Handbook of Epoxy Resins, New York, McGraw-Hill (1967)
Sanjana, Z. M., Schaefer, W. H., Ray, J. R.: Polym. Eng. Sci. 21, 474 (1981)
Morgan, R. J., in: The Role of the Polymeric Matrix in Processing and Structural Properties of Composite Materials, Seferis, J. and Nicolais, G., New York, Plenum Press, p. 207–214 (1983)
Morgan, R. J., Mones, E. T.: The Cure Reactions, Network Structure and Mechanical Response of Dimainodiphenyl Sulfone Cured Tetraglycidyl 4,4′Diaminodiphenyl Methane Epoxies, Polymer (submitted)
Narracott, E.: Brit. Plast. 26, 120 (1953)
Shechter, L., Wynstra, J., Kurkjy, R. P.: Ind. Eng. Chem. 48, 94 (1956)
Simons, D. M., Verbanc, J. J.: J. Polym. Sci., 44, 303 (1960)
Anderson, H. C., SPE Journal, 16, 1241 (1960)
Kakurai, T. and Noguchi, T.: J. Soc. Org. Syn. Chem. Japan. 18, 485 (1960)
Smith, I. T.: Polymer, 2, 95 (1961)
Kwei, T. K.: J. Polym. Sci., 1A, 2985 (1963)
Stille, J. K., Culbertson, B. M.: J. Polym. Sci., A,2, 405 (1964)
Lee, L. H.: J. Polym. Sci., A,3, 859 (1965)
Price, C. C., Carmelite, D. D.: J. Am. Chem. Soc., 88, 4039 (1966)
Lee, H., Neville, K.: Handbook of Epoxy Resins, McGraw-Hill, New York, 1967
Bauer, R. S.: J. Polym. Sci., A-1, 5, 2192 (1967)
Sorokin, M. F., Shode, L. G., Steinpress, A. B.: Vysokomol. Soedin., A14, 309 (1972)
Sorokin, M. F. et al.: Vysokomol, Soedin., A14, 2420 (1972)
Sidyakin, P. V.: Vysokomol. Soedin., A14, 979 (1972)
Tanaka, Y., Mika, T. F. in: Epoxy Resins Chemistry and Technology, May, C. A. and Tanaka, Y. (eds.), New York, Dekker Ch. 3, 1973
Whiting, D. A., Kline, D. E.: J. Appl. Polym. Sci., 18, 1043 (1974)
Dušek, K., Bleha, M., Luňák, S.: J. Polym. Sci. (Polym. Chem. Ed.), 15, 2393 (1977)
Schneider, N. S. et al.: Polym. Eng. Sci., 19, 304 (1979)
Morgan, R. J.: J. Appl. Polym. Sci., 23, 2711 (1979)
Bokare, U. M., Gandhi, K. S.: J. Polym. Sci. (Polym. Chem. Ed.), 18, 857 (1980)
Stevens, G. C.: J. Appl. Polym. Sci., 26, 4259 (1981)
Allen, F. J., Hunter, W. M.: J. Appl. Chem., 7, 86 (1957)
Fowler, G. W., Fitzpatrick, J. T.: U. S. Patent 2,426,264, 1947
Haynes, L. T., Heilbron, I., Jones, E. R. H., Sondheimer, F.: J. Chem. Soc., 1583 (1947)
Fife, H. F., Roberts, F. H.: Brit. Patent, 601,608, (1948)
Letsinger, R. L., Traynham, J. G., Bobko, E.: J. Am. Chem. Soc., 74, 399 (1952)
Jacobs, T. L., Dankner, D., Dankner, H. R.: J. Am. Chem. Soc., 80, 864 (1958)
Burness, D. M.: J. Org. Chem., 29, 1862 (1964)
Bell, J. P., McCarvill, W. T.: J. Appl. Polym. Sci., 18, 2243, (1974)
Keenan, M. A., Smith, D. A.: J. Appl. Polym. Sci., 11, 1009, (1967)
Paterson-Jones, J. C., Smith, D. A.: J. Appl. Polym. Sci., 12, 1601 (1968)
Bishop, D. P., Smith, D. A.: J. Appl. Polym. Sci., 14, 205 (1970)
Leisegang, E. C., Stephen, A. M., Paterson-Jones, J. C.: J. Appl. Polym. Sci., 14, 1961 (1970)
Paterson-Jones, J. C.: J. Appl. Polym. Sci., 19, 1539 (1975)
Butler, G. B.: Polymer Preprints, ACS, 8, 35 (1967)
Moacanin, J. et al.: Org. Coat. and Appl. Polym. Sci. Preprints, ACS, 47, 587 (1982)
General Dynamics Report F33615-80-C-5021 (1980)
Bell, J. P.: J. Polym. Sci. A-2, 417 (1970)
Mijovic, J., Kim, J., Slaby, J.: J. Appl. Polym. Sci., 29, 1449, (1984)
Grayson, M. A., Wolf, C. J.: J. Polym. Sci. (Polymer Physics Ed.) (In press)
Wolf, C. J.: McDonnell-Douglas Research Laboratories, Private Communication
David, C., in Comprehensive Chemical Kinetics, Vol. 14, Degradation of Polymers, Bamford, C. H. and Typer, C. F. H. (eds.), Amsterdam, Elsevier, p. 1. (1975)
Morgan, R. J., O'Neal, J. E.: J. Macromol. Sci. Phys., B15 (1), 139 (1978)
Morgan, R. J., O'Neal, J. E., Miller, D. B.: J. Mater. Sci. 14, 109 (1979)
Morgan, R. J., O'Neal, J. E.: Polym. Plast. Technol., 10 (1), 49 (1978)
Kong, E. S. et al.: Polym. Eng. Sci., 21, 943 (1981)
Findley, W. N., Reed, R. M.: Polym. Eng. Sci. 27, 837 (1977)
Barton, J. M.: Polymer 20, 1018 (1979)
Gordon, G. A., Ravve, A.: Polym. Eng. Sci. 20, 70 (1980)
Diamant, Y., Marom, G., Broutman, L. J.: J. Appl. Polym. Sci., 26, 3015 (1981)
Carswell, T. S.: Phenolplasts, New York, Interscience, (1947)
Rochow, T. G., Rowe, F. G.: Anal. Chem., 21, 261 (1949)
Spurr, R. A. et al.: Ind. Eng. Chem. 49, 1839 (1957)
Morgan, R. J., O'Neal, J. E.: Polym. Eng. Sci. 18, 1081 (1978)
Erath, E. H., Spurr, R. A.: J. Polym. Sci. 35, 391 (1959)
Rochow, T. G.: Anal. Chem. 33, 1810 (1961)
Gallacher, L., Bettelheim, F. A.: J. Polym. Sci. 59, 697 (1962)
Erath, E. H., Robinson, J.: J. Polym. Sci. Part C, 3, 65 (1963)
Wohnsiedler, H. P.: J. Polym. Sci., Part C, 3, 77 (1963)
Lewis, A. F.: SPE Trans, 3, 201 (1963)
Lewis, A. F., Ramsey, W. B.: Adhes. Age, 9, 20 (1966)
Solomon, D. H., Loft, B. C., Swift, J. D.: J. Appl. Polym. Sci., 11, 1593 (1967)
Cuthrell, R. E.: J. Appl. Polym. Sci. 11, 949 (1967)
Neverov, A. N. et al.: Vysokomol. Soedin, A10, 463 (1968)
Nenkov, G., Mikhailov, M.: Makromol. Chem. 129, 137 (1969)
Kenyon, A. S., Nielsen, L. E.: J. Macromol. Sci. Chem. A3 (2), 275 (1969)
Strecker, R. A. H.: J. Appl. Polym. Sci. 13, 2439 (1969)
French, D. M., Strecker, R. A. H., Tompa, A. S.: J. Appl. Polym. Sci., 14, 599 (1970)
Turner, D. T., Nelson, B. E.: J. Polym. Sci. Polym. Phys. Ed., 10, 2461 (1972)
Basin, V. Ye. et al.: Polym. Sci. USSR, 14, 2339 (1972)
Kessenikh, R. M., Korshunova, L. A., Petrov, A. V.: Polym. Sci., USSR, 14, 466 (1972)
Bozveliev, L. G., Mihajlov, M. G.: J. Appl. Polym. Sci., 17, 1963 (1973); J. Appl. Polym. Sci., 17, 1973 (1973)
Kreibich, U. T., Schmid, R.: J. Polym. Sci. Symp. 53, 177 (1975)
Morgan, R. J., O'Neal, J. E.: Polym., Preprints, ACS, 16 (2), 610 (1975)
Selby, K., Miller, L. E.: J. Mater. Sci. 10, 12 (1975)
Karyakina, M. I. et al.: Vysokomol. Soedin, A17, 466 (1975)
Maiorova, M. V. et al.: Vysokomol. Soedin, A17, 471 (1975)
Smartsev, V. M. et al.: Vysokomol. Soedin, A17, 836 (1975)
Morgan, R. J., O'Neal, J. E.: Polym. Plast. Technol. Eng. 5 (2), 173 (1975)
Racich, J. L., Koutsky, J. A.: J. Appl. Polym. Sci., 20, 2111 (1976)
Morgan, R. J., O'Neal, J. E.: in: Toughness and Brittleness of Plastics, Advances in Chemistry Series 154, Deanin, R. D. and Grugnola, A. M., (eds.) (Washington, D.C. Am. Chem. Soc.), Ch. 2 (1976)
Morgan, R. J., O'Neal, J. E.: J. Mater. Sci. 12, 1966 (1977)
Morgan, R. J., O'Neal, J. E.: in: Chemistry and Properties of Crosslinked Polymers, Labana, S. S., (ed.) New York, Academic Press, p. 289–301 (1977)
Luettgert, K. E., Bonart, R.: Prog. Colloid. Polym. Sci. 64, 38 (1978)
Dušek, K. et al.: Polymer 19, 393 (1978)
Schmid, R.: Prog. Colloid. Polym. Sci. 64, 17 (1978)
Mijovic, J. S., Koutsky, J. A.: Polymer 20, 1095 (1979)
Mijovic, J. S., Koutsky, J. A.: J. Appl. Polym. Sci. 23, 1037 (1979)
Aspbury, P. J., Wake, W. C.: Br. Polym. J. 11, 17 (1979)
Matyi, R. J., Uhlmann, D. R., Koutsky, J. A.: J. Polym. Sci., Polym. Phys. Ed. 18, 1053 (1980)
Mijovic, J., Tsay, L.: Polymer 22, 902 (1981)
Oberlin, A. et al.: J. Polym. Sci. (Polymer Phys. Ed.) 20, 579 (1982)
Bell, J. P.: Org. Coatings & Appl. Polym. Sci. 46, 585 (1982)
Takahama, T., Geil, P. H.: Makromol. Chem., Rapid Commun. 3, 389 (1982)
Funke, W.: Chimia, 22, 111 (1968)
Funke, W., Beer, W., Seitz, U.: Prog. Colloid. Polym. Sci. 57, 48 (1975)
Fellers, J. F., Lee, J. S.: SAXS Studies of Polymeric Materials Used in High Performance Composites, Lawrence Livermore National Laboratory Progress Report, P.O. 281901 August (1983)
Kaelbe, D. H.: in: Epoxy Resins, Chemistry and Technology, May, C. A. and Tanaka, Y., (eds.), New York, Marcel Dekker, Ch. 5 (1973)
Morgan, R. J., Mones, E. T., Steele, W. J.: Polymer 23, 295 (1982)
Morgan, R. J., O'Neal, J. E.: J. Polym. Sci., Polymer Phys. Ed., 14, 1053 (1976)
Eyring, H.: J. Chem. Phys. 4, 283 (1936)
Brown, I. M., Sandreczki, T. C.: McDonnell-Douglas Research Laboratories, St. Louis, personal communication
Morgan, R. J., O'Neal, J. E., Fanter, D. L.: J. Materials Sci. 15, 751 (1980)
Verette, R. M.: Temperature/humidity effects on the strength of graphite epoxy laminates, AIAA Paper No. 75–1011 (1975)
McKague, E. L., Jr., Halkias, J. E., Reynolds, J. D. J.: Compos. Mater. 9, 2 (1975)
Browning, C. E.: Ph. D. thesis, University of Dayton, Dayton, Ohio 1976
Hedrick, I. G., Whiteside, J. B.: Effects of Environment on Advanced Composite Structures in AIAA Conference on aircraft composites: the emerging methodology of structural assurance, San Diego, CA, Paper No. 77–463 (1977)
McKague, E. L.: Chapter 5 in Proceedings of Conference on Environmental Degradation of Engineering Materials', Louthan, M. R. and McNitt, R. P., (eds.), Virginia Polytechnic Inst. Printing Dept., Blacksburg, VA p. 353 (1977)
Browning, C. E.: The mechanism of elevated temperature property losses in high performance structural epoxy resin matrix materials after exposure to high humidity environments, 22nd National SAMPE Symposium and Exhibition, San Diego, CA 22, 365 (1977)
Advanced Composite Materials-Environmental Effects, ASTM STP 658, ed. Vinson, J. P., Philadelphia, American Society for Testing and Materials, (1978)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1985 Springer-Verlag
About this paper
Cite this paper
Morgan, R.J. (1985). Structure-property relations of epoxies used as composite matrices. In: Epoxy Resins and Composites I. Advances in Polymer Science, vol 72. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-15546-5_1
Download citation
DOI: https://doi.org/10.1007/3-540-15546-5_1
Received:
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-15546-1
Online ISBN: 978-3-540-39457-0
eBook Packages: Springer Book Archive