Collection
Engineering: Mechanical Engineering: Design, Computational, Applications
- Submission status
- Closed
This TC welcomes submissions in three broad areas of Mechanical Engineering: Design, computational and applications. Design is related to structures and composites, applied mechanics, fracture mechanics, materials science and processing, vibrations, elasticity and loads, control, mechatronics, robotics, smart materials and intelligent systems, heat exchangers, Computer Aided Design (CAD) and manufacturing, product design, compliant mechanisms, sensors and actuators, MEMS and micro and nano mechanics. Computational is concerned with simulation, vibrations, finite element method (FEM), plasma and fusion, dynamics, engines, fluid dynamics, heat transfer, thermal expansion, hydrostatics, gas flow and temperature measurement. Applications include biomolecular systems, microfluids, vehicle dynamics, autonomous vehicles, unmanned vehicles, maritime architecture, naval engineering, military engineering, railway engineering, automotive engineering, HVAC, biomechanics, engineering in cancer, nuclear science and engineering, nuclear reactor systems, radiation protection and shielding, reactor safety, nuclear radiation and measurements, acoustical engineering, education, public policy, project management , transportation, safety and maintenance. Research papers on Mechanical Engineering Applications not mentioned are welcome to be submitted.
Editors
-
Dr. Murat Kadir Yesilyurt
.
Articles (150 in this collection)
-
-
Mechanism of underexcavation and practical design method for building rectification
Authors (first, second and last of 4)
- Junhua Xiao
- Jianping Sun
- Qingxia Yue
- Content type: Research Article
- Open Access
- Published: 14 March 2022
- Article: 103
-
Bagging-gradient boosting decision tree based milling cutter wear status prediction modelling
Authors (first, second and last of 5)
- Weiping Xu
- Wendi Li
- Huawei Chen
- Content type: Research Article
- Open Access
- Published: 20 November 2021
- Article: 879
-
Design and development of multifunctional patient bed with integrated toilet
Authors
- Atul B. Andhare
- Anil M. Onkar
- Content type: Research Article
- Open Access
- Published: 27 September 2021
- Article: 813
-
Optimal PID and fuzzy logic based position controller design of an overhead crane using the Bees Algorithm
Authors
- Esmael Adem Esleman
- Gürol Önal
- Mete Kalyoncu
- Content type: Research Article
- Open Access
- Published: 27 September 2021
- Article: 811
-
Nonlinear vibration of the spiral bevel gear under periodic torque considering multiple elastic deformation evaluations due to different bearing supports
Authors
- Farhad S. Samani
- Moein Salajegheh
- Moslem Molaie
- Content type: Research Article
- Open Access
- Published: 13 August 2021
- Article: 772
-
Parametrical investigation for the optimization of spherical jet-stirred reactors design using large eddy simulations
Authors (first, second and last of 5)
- Ghazaleh Esmaeelzade
- Kai Moshammer
- Holger Grosshans
- Content type: Research Article
- Open Access
- Published: 04 August 2021
- Article: 766
-
Motion analysis method of multibody system with contact and plastic deformation using linear complementarity problem
Authors
- Shun Yamaguchi
- Yoshiki Sugawara
- Masakazu Takeda
- Content type: Research Article
- Open Access
- Published: 26 July 2021
- Article: 752
-
Study on the cardboard behavior during the vacuum picking process in automatic pantyhose packaging machine
Authors
- Shiqing Wu
- Peixing Li
- Content type: Research Article
- Open Access
- Published: 14 July 2021
- Article: 738
-
Anti sway tuned control of gantry cranes
Authors (first, second and last of 6)
- Vladimir A. Suvorov
- Mohammad Reza Bahrami
- Sergey A. Kan
- Content type: Research Article
- Open Access
- Published: 06 July 2021
- Article: 729
-
Calibration of κ-ε turbulence model for thermal–hydraulic analyses in rib-roughened narrow rectangular channels using genetic algorithm
Authors
- Abid Hossain Khan
- Md.Shafiqul Islam
- Istiak Uddin Sazzad
- Content type: Research Article
- Open Access
- Published: 30 May 2021
- Article: 678
-
Development and performance evaluation of a Pedal Operated Seed Cleaner (POS-Cleaner)
Authors (first, second and last of 7)
- Wilber Akatuhurira
- Peter Tumutegyereize
- Hussein Balimunsi Kivumbi
- Content type: Research Article
- Open Access
- Published: 30 May 2021
- Article: 675
-
A multi-response optimization of the multi-directional forging process for aluminium 7075 alloy using grey-based taguchi method
Authors (first, second and last of 5)
- C. Obara
- F. M. Mwema
- J. O. Obiko
- Content type: Research Article
- Open Access
- Published: 01 May 2021
- Article: 596
-
Numerical investigation of the impact of inclined baffles and an elastic vibrating beam on the thermo-fluid behavior in a rectangular channel
Authors
- S. Faramarzi
- R. Ghasemiasl
- F. Ghadami
- Content type: Research Article
- Open Access
- Published: 23 April 2021
- Article: 578
-
Experimental evaluation of the effect of soil water fluctuations in the dynamic behavior of machines
Authors (first, second and last of 4)
- Marcelo Miranda Cremaschi
- Daniella Escribano Leiva
- Cristián Molina Vicuña
- Content type: Research Article
- Open Access
- Published: 06 April 2021
- Article: 530
-
A CFD study on hydrocarbon mean residence time in a horizontal oil–water separator
Authors
- Tathagata Acharya
- Terry Potter
- Content type: Research Article
- Open Access
- Published: 23 March 2021
- Article: 492
-
Enhancement of machinability of titanium alloy in the Eductor based PMEDM process
Authors
- S. Jeavudeen
- H. Siddhi Jailani
- M. Murugan
- Content type: Research Article
- Open Access
- Published: 22 March 2021
- Article: 490
-
Smart damping of skew composite plates using Murakami zig-zag function
Authors
- N. Mehadi Khan
- R. Suresh Kumar
- Content type: Research Article
- Open Access
- Published: 20 March 2021
- Article: 478
-
Jet A and Propane gas combustion in a turboshaft engine: performance and emissions reductions
Authors
- Ali Hasan
- Oskar J. Haidn
- Content type: Research Article
- Open Access
- Published: 19 March 2021
- Article: 471
-
Adapting ant colony optimization of compliant structures using elements with linearly varying cross-sections
Authors
- Nadim Diab
- Farah Jouni
- Content type: Research Article
- Open Access
- Published: 18 March 2021
- Article: 467
-
Fabrication of aluminum bipolar plates with Archimedes' screw-shaped channels: a rubber pad forming process assessment
Authors
- S. J. Hashemi
- Amir H. Roohi
- Content type: Research Article
- Open Access
- Published: 04 March 2021
- Article: 418
-
A new graphical technique for acceleration analysis of four bar mechanisms using the instantaneous center of zero acceleration
Authors
- Nadim Diab
- Content type: Research Article
- Open Access
- Published: 15 February 2021
- Article: 327
-
Blank thinning predictions of an aluminum alloy in hole expansion process using finite element method
Authors
- Toros Arda AkÅŸen
- Mehmet Firat
- Content type: Research Article
- Open Access
- Published: 12 February 2021
- Article: 320
-
Stochastic optimization and modeling of high-velocity impact tests on high-temperature carbon–carbon composites
Authors
- Latif Tibet AktaÅŸ
- Levent Aydın
- Content type: Research Article
- Open Access
- Published: 12 February 2021
- Article: 313
-
A detailed study on design, fabrication, analysis, and testing of the anti-roll bar system for formula student cars
Authors (first, second and last of 5)
- Sachin Sunil Kelkar
- Puneet Gautam
- R. Manoharan
- Content type: Research Article
- Open Access
- Published: 10 February 2021
- Article: 302
-
The influence of different geometrical dimensions of convectors on the heat transfer from panel radiators
Authors
- Tamer Calisir
- Senol Baskaya
- Content type: Research Article
- Open Access
- Published: 06 February 2021
- Article: 284
-
Optimization of Cutting Parameters Affecting Surface Roughness in Turning of Inconel 625 Superalloy by Cryogenically Treated Tungsten Carbide Inserts
Authors
- Mahir Akgün
- Halil Demir
- Content type: Research Article
- Open Access
- Published: 03 February 2021
- Article: 277
-
Immersed boundary method for MHD unsteady natural convection around a hot elliptical cylinder in a cold rhombus enclosure filled with a nanofluid
Authors
- Ali Akbar Hosseinjani
- Amir H. Roohi
- Content type: Research Article
- Open Access
- Published: 03 February 2021
- Article: 270
-
Discrete element simulation of the charge in the hopper of a blast furnace, calibrating the parameters through an optimization algorithm
Authors (first, second and last of 5)
- Gabriele Degrassi
- Lucia Parussini
- Vincenzo Dimastromatteo
- Content type: Research Article
- Open Access
- Published: 29 January 2021
- Article: 242
-
Effect of the distance between primary pivots on the stability of two-chain cargo suspension arrangement
Authors
- Yevgeny V. Nikitin
- Sergei A. Podporin
- Content type: Research Article
- Open Access
- Published: 28 January 2021
- Article: 231
-
Influence of slide burnishing process on the surface characteristics of precipitation hardenable steel
Authors (first, second and last of 4)
- B. Sachin
- Charitha M. Rao
- N. P. Puneet
- Content type: Research Article
- Open Access
- Published: 27 January 2021
- Article: 223
-
Experimental analysis on hydrodynamic coefficients of an underwater glider with spherical nose for dynamic modeling and motion simulation
Authors (first, second and last of 4)
- Kambiz Divsalar
- Rouzbeh Shafaghat
- Rezvan Alamian
- Content type: Research Article
- Open Access
- Published: 25 January 2021
- Article: 201
-
Modeling plastic anisotropy evolution of AISI 304 steel sheets by a polynomial yield function
Authors
- Bora Sener
- Emre Esener
- Mehmet Firat
- Content type: Research Article
- Open Access
- Published: 23 January 2021
- Article: 181
-
Modeling dynamic mechanical system behavior using sequence modeling of embodiment function relations: case study on a hammer mechanism
Authors
- Andreas Wettstein
- Patric Grauberger
- Sven Matthiesen
- Content type: Research Article
- Open Access
- Published: 12 January 2021
- Article: 128
-
Implementation of Dahl’s dynamic friction model to contact mechanics of elastic solids
Authors
- Mehmet N. Balci
- Content type: Research Article
- Open Access
- Published: 11 January 2021
- Article: 92
-
Tip relief designed to optimize contact fatigue life of spur gears using adapted PSO and Firefly algorithms
Authors
- Raynald Guilbault
- Sébastien Lalonde
- Content type: Research Article
- Open Access
- Published: 11 January 2021
- Article: 66
-
Numerical investigation of vortex formation in water intake system of a pumping station during low and high tides
Authors
- Mahdi Mahmoudi Sabouki
- Seyed Saied Bahrainian
- Morteza Behbahani-Nejad
- Content type: Research Article
- Open Access
- Published: 11 January 2021
- Article: 102
-
A Levy solution for bending, buckling, and vibration of Mindlin micro plates with a modified couple stress theory
Authors
- S. M. Amin Yekani
- Famida Fallah
- Content type: Research Article
- Published: 07 December 2020
- Article: 2169
-
Regressor-free adaptive vibration control of constrained smart beams with axial stretching
Authors
- Hayder F. N. Al-Shuka
- Ehab N. Abas
- Content type: Research Article
- Published: 04 December 2020
- Article: 2146
-
Effect of relative movement between bearing races on load distribution on ball bearings
Authors
- Ravi Sinha
- Vineet Sahoo
- Content type: Short Communication
- Published: 28 November 2020
- Article: 2100
-
Solution of dynamic boundary value problems for an elastic disk with double porosity
Authors
- I. Tsagareli
- Content type: Research Article
- Published: 09 November 2020
- Article: 1962
-
Effect of enhanced weld cooling on the mechanical properties of a structural steel with a yield strength of 700 MPa
Authors
- Juhani Laitila
- Lassi Keränen
- Jari Larkiola
- Content type: Research Article
- Open Access
- Published: 26 October 2020
- Article: 1888
-
Numerical evaluation of lightweight ultra high strength steel sandwich for energy absorption
Authors (first, second and last of 4)
- Samuel Hammarberg
- Simon Larsson
- Pär Jonsén
- Content type: Research Article
- Open Access
- Published: 24 October 2020
- Article: 1876
-
Application of multi-criteria decision-making (MCDM) methods on a meso-scale electrical discharge drilling (EDD) process
Authors
- Yakup Yildiz
- Content type: Research Article
- Published: 23 October 2020
- Article: 1872
-
Time domain aero-thermo-elastic instability of two-dimensional non-linear curved panels with the effect of in-plane load considered
Authors
- Hamid Moosazadeh
- Mohammad M. Mohammadi
- Content type: Research Article
- Published: 15 September 2020
- Article: 1705
-
Surface roughness analysis in milling machining using design of experiment
Authors (first, second and last of 5)
- Mehdi Moayyedian
- Alireza Mohajer
- Javad Farrokhi Derakhshandeh
- Content type: Research Article
- Published: 14 September 2020
- Article: 1698
-
Numerical investigation of slip flow phenomenon on performance characteristics of gas foil journal bearing
Authors (first, second and last of 4)
- Mohammad Autif Shahdhaar
- Sandeep S. Yadawad
- Suraj K. Behera
- Content type: Research Article
- Published: 11 September 2020
- Article: 1677
-
Static, dynamic and natural frequency analyses of functionally graded carbon nanotube annular sector plates resting on viscoelastic foundation
Authors
- Masoud Babaei
- Kamran Asemi
- Content type: Research Article
- Published: 09 September 2020
- Article: 1652
-
Analytic and numerical results of a disc cam bending with a roller follower
Authors
- Louay S. Yousuf
- Dan B. Marghitu
- Content type: Research Article
- Published: 07 September 2020
- Article: 1639
-
Optimization for the prepreg compression molding of notebook computer cover using design of experiment and finite element method
Authors (first, second and last of 4)
- Ho-Sang Kim
- Won-Gi Lee
- Kyoung Don Lee
- Content type: Research Article
- Published: 02 September 2020
- Article: 1619