Collection
Special Focus: Selected and Expanded Papers Based on Abstracts Submitted for the 2020 International Thermal Spray Conference (ITSC 2020) (Event Canceled Due to the COVID-19 Pandemic)
- Submission status
- Closed
Special Issue published in January 2021, Vol. 30, No. 1-2 of Journal of Thermal Spray Technology
Editors
-
Fardad Azarmi
North Dakota State University, USA
-
Kantesh Balani
Indian Institute of Technology, India
-
Jan Cizek
The Czech Academy of Sciences, Czech Republic
-
Heli Koivuluoto
Tampere University of Technology, Finland
-
Yuk-Chiu Lau
GE Power and Water (retired), USA
-
Hua Li &
Hua Li
Ningbo Institute of Materials Technology and Engineering, China
-
Filofteia-Laura Toma
Fraunhofer Institute—IWS, Germany
Articles (32 in this collection)
-
-
Development of Thermal Spray Processes for Depositing Coatings on Thermoplastics
Authors
- Kirsten Bobzin
- Wolfgang Wietheger
- Martin Andreas Knoch
- Content type: PEER REVIEWED
- Open Access
- Published: 31 January 2021
- Pages: 157 - 167
-
Plasma-Sprayed High-Performance (Bi2O3)0.75(Y2O3)0.25 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs)
Authors (first, second and last of 4)
- Rui Chen
- Shan-Lin Zhang
- Cheng-Xin Li
- Content type: PEER REVIEWED
- Published: 28 January 2021
- Pages: 196 - 204
-
Effect of Powder Particle Size and Spray Parameters on the Ni/Al Reaction During Plasma Spraying of Ni-Al Composite Powders
Authors (first, second and last of 5)
- Li Zhang
- Xian-Jin Liao
- Chang-Jiu Li
- Content type: PEER REVIEWED
- Published: 25 January 2021
- Pages: 181 - 195
-
Corrosion Behavior and Galvanic Corrosion Resistance of WC and Cr3C2 Cermet Coatings in Madeira River Water
Authors (first, second and last of 6)
- Leonardo Augusto Luiz
- Juliano de Andrade
- Milton Jakson de Sousa
- Content type: PEER REVIEWED
- Published: 21 January 2021
- Pages: 205 - 221
-
Diffusion Modelling on the Microstructure Evolution in MCrAlY-Superalloy System
Authors (first, second and last of 5)
- Zhenyuan Xu
- Kang Yuan
- Jianming Liu
- Content type: PEER REVIEWED
- Published: 20 January 2021
- Pages: 108 - 118
-
The Influence of Plasma Composition in the Thermal Cyclic Performance of Yttria-Stabilized Zirconia (8YSZ) Thermal Barrier Coatings (TBCs)
Authors (first, second and last of 5)
- Bruno Guerreiro
- Rogerio S. Lima
- Karl Körner
- Content type: PEER REVIEWED
- Published: 20 January 2021
- Pages: 59 - 68
-
Calcium-Magnesium-Aluminum-Silicate (CMAS) Corrosion Resistance of Y-Yb-Gd-Stabilized Zirconia Thermal Barrier Coatings
Authors (first, second and last of 10)
- Tongxin Wang
- Fang Shao
- Kai Yang
- Content type: PEER REVIEWED
- Published: 07 January 2021
- Pages: 442 - 456
-
Improved Corrosion Protection of Magnesium Alloys AZ31B and AZ91 by Cold-Sprayed Aluminum Coatings
Authors (first, second and last of 4)
- R. P. S. Chakradhar
- G. Chandra Mouli
- Meenu Srivastava
- Content type: PEER REVIEWED
- Published: 04 January 2021
- Pages: 371 - 384
-
Metallization of Porous Polyethylene Using a Wire-Arc Spray Process for Heat Transfer Applications
Authors
- S. Devaraj
- A. McDonald
- S. Chandra
- Content type: Review
- Published: 03 January 2021
- Pages: 145 - 156
-
Benefits of Hydrogen in a Segmented-Anode Plasma Torch in Suspension Plasma Spraying
Authors (first, second and last of 7)
- Alice Dolmaire
- Enni Hartikainen
- Aurélien Joulia
- Content type: PEER REVIEWED
- Open Access
- Published: 03 January 2021
- Pages: 236 - 250
-
Development of Highly Durable Superhydrophobic Coatings by One-Step Plasma Spray Methodology
Authors (first, second and last of 5)
- B. Swain
- A. R. Pati
- A. Behera
- Content type: PEER REVIEWED
- Published: 03 January 2021
- Pages: 405 - 423
-
Material Model for Predicting Dynamic Response of Copper and Nickel at Very High Strain Rates Under Cold Spray Conditions
Authors
- Maryam Razavipour
- Bertrand Jodoin
- Content type: PEER REVIEWED
- Published: 03 January 2021
- Pages: 324 - 343
-
High Rate Deposition in Cold Spray
Authors (first, second and last of 8)
- Ozan C. Ozdemir
- Patricia Schwartz
- Christian A. Widener
- Content type: PEER REVIEWED
- Published: 03 January 2021
- Pages: 344 - 357
-
Wetting Behavior of Wear-Resistant WC-Co-Cr Cermet Coatings Produced by HVOF: The Role of Chemical Composition and Surface Roughness
Authors (first, second and last of 6)
- Pavel Komarov
- David Jech
- Ladislav ÄŒelko
- Content type: PEER REVIEWED
- Published: 03 January 2021
- Pages: 285 - 303
-
Quantitative Characterization of Carbide Loss and Correlation with Microstructure and Performance of Plasma-Sprayed NiCr-Cr3C2 Metal Carbide Coatings
Authors (first, second and last of 12)
- Q. Liu
- Y. B. Hu
- Y. S. Ma
- Content type: PEER REVIEWED
- Published: 03 January 2021
- Pages: 457 - 470
-
Use of Different Process Gases for Manufacturing Isolating Alumina Coatings by Flame Spraying with Cords
Authors (first, second and last of 8)
- Michél Hauer
- Melanie Meyer
- Knuth-Michael Henkel
- Content type: PEER REVIEWED
- Open Access
- Published: 05 February 2021
- Pages: 222 - 235
-
Perspectives on Environmental Barrier Coatings (EBCs) Manufactured via Air Plasma Spray (APS) on Ceramic Matrix Composites (CMCs): A Tutorial Paper
Authors
- Kang N. Lee
- Dongming Zhu
- Rogerio S. Lima
- Content type: PEER REVIEWED
- Published: 09 February 2021
- Pages: 40 - 58
-
Thermal Spray Copper Alloy Coatings as Potent Biocidal and Virucidal Surfaces
Authors (first, second and last of 5)
- J. Mostaghimi
- L. Pershin
- M. Ringuette
- Content type: PEER REVIEWED
- Published: 28 February 2021
- Pages: 25 - 39
-
Cold Gas Spraying of Nickel-Titanium Coatings for Protection Against Cavitation
Authors (first, second and last of 4)
- Georg Mauer
- Karl-Heinz Rauwald
- Thomas E. Weirich
- Content type: PEER REVIEWED
- Open Access
- Published: 23 December 2020
- Pages: 131 - 144
-
Changes in the Coating Composition Due to APS Process Conditions for Al2O3-Cr2O3-TiO2 Ternary Powder Blends
Authors (first, second and last of 6)
- Maximilian Grimm
- Susan Conze
- Thomas Lampke
- Content type: PEER REVIEWED
- Open Access
- Published: 16 December 2020
- Pages: 168 - 180
-
Depositing Aluminum onto PEKK Composites by Cold Spray
Authors
- P. Feng
- M. R. Rokni
- S. R. Nutt
- Content type: Peer Reviewed
- Published: 30 November 2020
- Pages: 385 - 393
-
Effect of Grit Blasting Parameters on Surface and Near-Surface Properties of Different Metal Alloys
Authors
- Tina Ghara
- S. Paul
- P. P. Bandyopadhyay
- Content type: PEER REVIEWED
- Published: 26 November 2020
- Pages: 251 - 269
-
Effect of Substrate Surface Texture Shapes on the Adhesion of Plasma-Sprayed Ni-Based Coatings
Authors (first, second and last of 6)
- Xianghua Zhan
- Yancong Liu
- Yanchao Jin
- Content type: Peer Reviewed
- Published: 25 November 2020
- Pages: 270 - 284
-
Failure Mechanisms of APS-YSZ-CoNiCrAlY Thermal Barrier Coating Under Isothermal Oxidation and Solid Particle Erosion
Authors (first, second and last of 5)
- Samia K. Essa
- Kuiying Chen
- Matthew X. Yao
- Content type: Peer Reviewed
- Published: 24 November 2020
- Pages: 424 - 441
-
Erosion Resistance Improvement of Polymer Matrix Composites by Detonation-Sprayed Multilayered Coatings
Authors
- Yongjing Cui
- Changliang Wang
- Zhihui Tang
- Content type: PEER REVIEWED
- Published: 17 November 2020
- Pages: 394 - 404
-
Bonding Mechanisms in Cold Spray: Influence of Surface Oxidation During Powder Storage
Authors (first, second and last of 5)
- Maryam Razavipour
- Saeed Rahmati
- Bertrand Jodoin
- Content type: PEER REVIEWED
- Published: 17 November 2020
- Pages: 304 - 323
-
Softening Behavior of Cold-Sprayed Aluminum-Based Coatings AA1200 and AA7075 During Annealing
Authors (first, second and last of 4)
- K. Bobzin
- W. Wietheger
- L. Gerdt
- Content type: PEER REVIEWED
- Open Access
- Published: 12 November 2020
- Pages: 358 - 370
-
Intermetallic Phase Evolution of Cold-Sprayed Ni-Ti Composite Coatings: Influence of As-Sprayed Chemical Composition
Authors
- R. Nikbakht
- H. Assadi
- B. Jodoin
- Content type: PEER REVIEWED
- Published: 08 November 2020
- Pages: 119 - 130
-
Thermal-Sprayed Photocatalytic Coatings for Biocidal Applications: A Review
Authors (first, second and last of 4)
- Yi Liu
- Jing Huang
- Hua Li
- Content type: REVIEW
- Published: 04 November 2020
- Pages: 1 - 24
-
High-Temperature Cycling of Plasma Sprayed Multilayered NiCrAlY/YSZ/GZO/YAG Thermal Barrier Coatings Prepared from Liquid Feedstocks
Authors (first, second and last of 5)
- Radek Musalek
- Tomas Tesar
- Rogerio S. Lima
- Content type: PEER REVIEWED
- Published: 03 November 2020
- Pages: 81 - 96
-
Evaluation and Characterization of a Durable Composite Phase Thermal Barrier Coating in Solid Particle Erosion and Burner Rig Tests
Authors (first, second and last of 4)
- Xinqing Ma
- Kristina Rivellini
- George Wildridge
- Content type: PEER REVIEWED
- Published: 09 October 2020
- Pages: 69 - 80