Collection
Special Issue: Biomaterials: Thermal Spray Processes and Applications
Special Issue published in December 2018, Vol. 27, No. 8 of Journal of Thermal Spray Technology
Editors
-
Andrew Ang
Swinburne University of Technology, Australia
-
Rehan Ahmed
Herriot Watt University, UK
-
Christopher C. Berndt
Swinburne University of Technology, Australia
Articles (34 in this collection)
-
-
HVOF Hydroxyapatite/Titania-Graded Coatings: Microstructural, Mechanical, and In Vitro Characterization
Authors (first, second and last of 11)
-
Effect of Ni Addition on Microstructure and Tribological Properties of Plasma-Sprayed MoSi2 Coatings
Authors (first, second and last of 6)
-
-
Influence of Feedstock on the Microstructure of Sm2Zr2O7 Thermal Barrier Coatings Deposited by Plasma Spraying
Authors (first, second and last of 4)
-
-
Adhesion Behavior of Escherichia coli on Plasma-Sprayed Zn and Ag Co-incorporated Calcium Silicate Coatings with Varying Surface Roughness
Authors (first, second and last of 10)
-
Indentation Fracture Behavior of Low Carbon Steel Thermal Spray Coatings: Role of Dry Sliding-Induced Tribolayer
Authors (first, second and last of 5)
-
Hollow Plasma-Sprayed Spherical Nanostructured Titania Feedstock for Photocatalytic Applications
Authors (first, second and last of 5)
-
High-Temperature Thermal Properties of Ba(Ni1/3Ta2/3)O3 Ceramic and Characteristics of Plasma-Sprayed Coatings
Authors (first, second and last of 4)
-
Variation of Thermal Barrier Coating Lifetime Characteristics with Thermal Durability Evaluation Methods
Authors (first, second and last of 5)
-
Analysis of Corrosion Behavior and Surface Properties of Plasma-Sprayed HA/Ta Coating on CoCr Alloy
Authors
-
-
Size Determination of the Grains in a Plasma-Sprayed Cast Iron Splat Based on the Heat Transfer Between the Splat and the Substrate
Authors (first, second and last of 6)
-
Microstructure and Micromechanical Response in Gas-Atomized Al 6061 Alloy Powder and Cold-Sprayed Splats
Authors (first, second and last of 9)
-
-
Effect of Feedstock Powder Morphology on Cold-Sprayed Titanium Dioxide Coatings
Authors (first, second and last of 5)
-
Comparative Study of Corrosion Performance of HVOF-Sprayed Coatings Produced Using Conventional and Suspension WC-Co Feedstock
Authors (first, second and last of 12)
-
Wear Resistance of Stainless Steel Coatings on ZE41 Magnesium Alloy
Authors (first, second and last of 7)
-
Microstructure, Mechanical Properties and Dry Sliding Wear Behavior of Cu-Al2O3-Graphite Solid-Lubricating Coatings Deposited by Low-Pressure Cold Spraying
Authors (first, second and last of 7)
-
Microstructures and Properties of Cold Spray Nanostructured HA Coatings
Authors (first, second and last of 6)
-
Enhanced Lubricant Property of Flame-Sprayed Aluminum Coatings Additivated by Reduced Graphene Oxide Nanosheets
Authors (first, second and last of 6)
-
Non-transferred Arc Torch Simulation by a Non-equilibrium Plasma Laminar-to-Turbulent Flow Model
Authors
-
Thermal Oxidation of Cold Sprayed Titanium-Based Coating Deposited on Co-Cr Alloy
Authors (first, second and last of 7)
-
-
Atmospheric Plasma-Sprayed Hydroxyapatite Coatings with (002) Texture
Authors (first, second and last of 7)
-
Silver-Doped Hydroxyapatite Coatings Deposited by Suspension Plasma Spraying
Authors (first, second and last of 14)
-
-
-
-
-
Fabrication and Characterization of Suspension Plasma-Sprayed Fluoridated Hydroxyapatite Coatings for Biomedical Applications
Authors (first, second and last of 5)
-
Enhancing Biocompatibility and Corrosion Resistance of Ti-6Al-4V Alloy by Surface Modification Route
Authors
-
