Collection
Research Advancement of Green Technologies
- Submission status
- Closed
Since energy consumption, environment concern, efficiency in manufacturing, etc. become important issues, green technology has become a significant research area to find solutions to these matters. As the third attempt to discuss the challenges toward green and sustainable manufacturing, this special issue covers multidisciplinary fields of green technology in the International Journal of Precision Engineering and Manufacturing (IJPEM). Topics of design and manufacturing of sustainable, energy saving and waste reduction process, new · renewable energy, light · eco-friendly materials and structure, and energy · environment management and policy within the scope of green manufacturing and applications
Editors
-
Won-Shik Chu
Seoul National University, Korea
-
Doo-Man Chun
University of Ulsan, Korea
-
Sung-Hoon Ahn
Seoul National University, Korea
Articles (42 in this collection)
-
-
Development of non-lubricated die for magnesium sheet forming of car body part
Authors (first, second and last of 6)
- Jae-Du Nam
- Seung-Hoon Cha
- Chung-Gil Kang
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1125 - 1129
-
Green alternative aluminum extrusion process through process convergence
Authors (first, second and last of 7)
- Myeong-Sik Jeong
- Seong-Yun Lee
- Dae-Cheol Ko
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1173 - 1177
-
Effect of electric current density on the mechanical property of advanced high strength steels under quasi-static tensile loads
Authors (first, second and last of 8)
- Min-Sung Kim
- Nguyen Thai Vinh
- John T. Roth
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1207 - 1213
-
Application of mechanical trimming to hot stamped 22MnB5 parts for energy saving
Authors (first, second and last of 4)
- Hong-Seok Choi
- Byung-Min Kim
- Dae-Cheol Ko
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1087 - 1093
-
Light weight design of direct-drive generator for large-scale wind turbine
Authors (first, second and last of 5)
- Da-Woon Choi
- Yun-Cheol Ro
- Seung-Ho Han
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1223 - 1228
-
Evaluation of drilling efficiency by percussion testing of a drill bit with new button arrangement
Authors (first, second and last of 6)
- Ki-Beom Kwon
- Chang-Heon Song
- Jung-Woo Cho
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1063 - 1068
-
Facile and scalable fabrication of transparent and high performance Pt/reduced graphene oxide hybrid counter electrode for dye-sensitized solar cells
Authors (first, second and last of 4)
- Hee Hyun Gong
- So Hyun Park
- Sung Chul Hong
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1193 - 1199
-
Study of an efficient real-time monitoring and control system for BUE and cutter breakage for CNC machine tools
Authors (first, second and last of 4)
- Shih-Ming Wang
- Chien-Da Ho
- Chuntai Yen
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1109 - 1115
-
Preparation of micro-channel catalytic reactor coated with macro-porous Al2O3 for fuel reformer
Authors
- No-Kuk Park
- Tae Jin Lee
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1241 - 1246
-
Machining characteristics of hybrid EDM with ultrasonic vibration and assisted magnetic force
Authors (first, second and last of 4)
- Yan-Cherng Lin
- Fang-Pin Chuang
- Han-Ming Chow
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1143 - 1149
-
Development of thermal gradient prediction method for thermal barrier coating
Authors (first, second and last of 6)
- Yongseok Kim
- Chang-Sung Seok
- Sung-Ho Yang
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1029 - 1033
-
Eco-friendly face milling of titanium alloy
Authors (first, second and last of 6)
- Kyung-Hee Park
- Gi-Dong Yang
- Dong Yoon Lee
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1159 - 1164
-
Tolerance optimization of a lower arm by using genetic algorithm and process capability index
Authors
- Kwang-Ki Lee
- Yun-Cheol Ro
- Seung-Ho Han
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1001 - 1007
-
Fatigue life prediction of caulking-joined parts
Authors (first, second and last of 5)
- Suk Woo Hong
- Jae Mean Koo
- In Cheol Jang
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1131 - 1135
-
Rapid sintering of copper nano ink using a laser in air
Authors (first, second and last of 5)
- Jun Ho Yu
- Kyung-Tae Kang
- Heuiseok Kang
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1051 - 1054
-
Evaluation of energy efficiency in cutting aerospace materials with high-pressure cooling lubricant supply
Authors (first, second and last of 5)
- Fritz Klocke
- Dieter Lung
- Hubertus Sangermann
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1179 - 1185
-
Preparation and characterization of copper/copper coated silicon carbide composites
Authors
- Ching Yern Chee
- Azida Azmi
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1215 - 1221
-
Characterizing the machining effects of lateral electrodes in electrical discharge machining
Authors
- A-Cheng Wang
- Lung Tsai
- Yan-Cherng Lin
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1095 - 1100
-
Improvement in mechanical properties by supercritical carbonation of non-cement mortar using fly ash and blast furnace slag
Authors
- Junyoung Park
- Yootaek Kim
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1229 - 1234
-
Study on flexibly-reconfigurable roll forming process for multi-curved surface of sheet metal
Authors (first, second and last of 5)
- Jun-Seok Yoon
- So-Eun Son
- Beom-Soo Kang
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1069 - 1074
-
Evaluation on hydrogen embrittlement of material using nondestructive test
Authors (first, second and last of 7)
- Dongsu Bae
- Jinkyung Lee
- Joonhyun Lee
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 989 - 993
-
Optimization of weld pitch on overlay welding using mathematical method
Authors
- Ji-Sun Kim
- In-Ju Kim
- Young-Gon Kim
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1117 - 1124
-
Terahertz radiation NDE of composite materials for wind turbine applications
Authors (first, second and last of 8)
- Je-Woong Park
- Kwang-Hee Im
- David Kuei Hsu
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1247 - 1254
-
Structural analysis on the superficial grooving stainless-steel thin-plate rupture discs
Authors (first, second and last of 5)
- Jae Young Jeong
- Wonseok Jo
- Seong Beom Lee
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1035 - 1040
-
A new tool holder design with two-dimensional motion for fabricating micro-dimple and groove patterns
Authors
- Rendi Kurniawan
- Tae Jo Ko
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1165 - 1171
-
Smart in-wheel generator using adaptive DC-DC converter for rechargeable batteries in electric vehicles
Authors (first, second and last of 4)
- Ngoc T. Nguyen
- Hung V. Ho
- Franklin Bien
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1009 - 1013
-
A study of the corrosive behavior of STS304 and STS 430, depending on surface pre-treatment conditions, in PEMFC while in operation
Authors (first, second and last of 6)
- MinSeok Moon
- KeeDo Woo
- SungMo Yang
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1201 - 1205
-
Micro-cutting with diamond tool micro-patterned by femtosecond laser
Authors (first, second and last of 5)
- Jaegu Kim
- Tae-Jin Je
- Kyung-Hyun Whang
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1081 - 1085
-
Surface texturing by turning process using circular driven rotary tool with multiple cutting edges
Authors (first, second and last of 5)
- Sy Quy Nguyen
- BoHung Kim
- Kyu Yeol Park
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1137 - 1142
-
Prediction of microstructure evolution during hot forging using grain aggregate model for dynamic recrystallization
Authors
- Ho Won Lee
- Seong-Hoon Kang
- Youngseon Lee
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1055 - 1062
-
Effects of NH4F concentrations of electrolytes and reaction time in the anodic oxidation process on the photovoltaic properties of back-illuminated DSSC
Authors (first, second and last of 4)
- Ho Chang
- Mu-Jung Kao
- Cheng-Yi Chou
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1187 - 1192
-
Research advancement of green technologies
Authors
- Won-Shik Chu
- Doo-Man Chun
- Sung-Hoon Ahn
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 973 - 977
-
Experimental investigation on galling performance of tool steel in stamping of UHSS sheets
Authors (first, second and last of 6)
- Hong-Seok Choi
- Sung-Gwi Kim
- Dae-Cheol Ko
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1101 - 1107
-
Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing
Authors (first, second and last of 8)
- Chi-Hoon Jeon
- Yong-Ha Jeong
- Kwang-Jin Lee
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1235 - 1239
-
Analysis of the capacitive pressure sensor with ring mesa structure
Authors
- Soon-Kwan Kwon
- Hee-Chan Cho
- Seung-Hwan Yi
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1023 - 1028
-
Analysis of mechanism of backflow defect of the aluminum wheel flow forming
Authors (first, second and last of 4)
- Wan-gi Cha
- So Young Hwang
- Cheol-soo Lee
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1075 - 1080
-
Development of hybrid clinched structure by using multi-cohesive zone models
Authors (first, second and last of 6)
- Chan-Joo Lee
- Jung-Min Lee
- Byung-Min Kim
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1015 - 1022
-
Design of hole-clinching process for joining CFRP and aluminum alloy sheet
Authors (first, second and last of 6)
- Chan-Joo Lee
- Seung-Hun Lee
- Dae-Cheol Ko
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1151 - 1157
-
Optimum design of the internal flushing channel of a drill bit using RSM and CFD simulation
Authors (first, second and last of 7)
- Chang-Heon Song
- Ki-Beom Kwon
- Jung-Woo Cho
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1041 - 1050
-
A classification of multi-axis features based on manufacturing process
Authors (first, second and last of 5)
- Mujin Kang
- Gyungha Kim
- Jae Kwan Kim
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 1255 - 1263
-
Real-time parameter adjustment and fault detection of remote laser welding by using ANN
Authors
- Kezia Amanda Kurniadi
- Kwangyeol Ryu
- Duckyoung Kim
- Content type: OriginalPaper
- Published: 05 June 2014
- Pages: 979 - 987