Effect of conformal cooling design on residual stresses in injection molded parts
Authors (first, second and last of 4)
Collection
Computational, Numerical and Physical Modeling & Simulation for Process Design, Development and Manufacturing
This Special Issue focuses primarily on cutting-edge topics related to design, processing and development along with the mechanism involved in product design, processing and advanced manufacturing. It also covers thermo-mechanical processing, physical and numerical simulation, reverse engineering, additive manufacturing, rapid tooling; machining mechanism and computational modeling.
Editors
-
Kuldeep Kumar Saxena
Dr. Kuldeep Kumar Saxena is an Associate Professor in the Department of Mechanical Engineering at GLA University. He completed his B.Tech in Mechanical Engineering and M.Tech in Material Science and Engineering from MNNIT Allahabad. Dr. Saxena obtained his doctoral degree from IIT Roorkee. With a total of 10 years of experience in academics, research, and industry, he has contributed significantly to the field.
-
Swadesh Kumar Singh
Dr. Swadesh Kumar Singh is a distinguished professor and the Dean of Research and Development at Gokaraju Rangaraju Institute of Engineering and Technology (GRIET) in Hyderabad, India. He earned his Ph.D. from the Indian Institute of Technology (IIT), Delhi, in 2004.
Articles (43 in this collection)
-
-
Experimental and CFD analysis of circular tube heat exchangers with solid-hollow inserts
Authors (first, second and last of 7)
-
-
Optimum design and manufacturing of the lifting cylindrical electromagnets considering magnetic, thermal, and mechanical limitations
Authors (first, second and last of 4)
-
Prediction and optimization of process parameters using design of experiments and fuzzy logic
Authors (first, second and last of 4)
-
Neural computing for erosion assessment in Al-20TiO2 HVOF thermal spray coating
Authors (first, second and last of 4)
-
-
-
Neural computing of slurry erosion of Al2O3-13TiO2 thermal spray HVOF coating for mining pump
Authors
-
-
-
On the constitutive modeling using meta-models and their deployment for finite element analysis to evaluate the high temperature deformation behaviour of Al 2014 alloy
Authors (first, second and last of 4)
-
Modelling of single and multi-port manifolds and studying the influence of structural and thermal behaviour on exhaust manifolds used in automotive applications
Authors (first, second and last of 6)
-
Adverse effect of rainfall on aerodynamic characteristics for different NACA airfoil configurations—A comprehensive review
Authors (first, second and last of 7)
-
3 dimensional fabrics for ballistic impact response: A Critical Evaluation
Authors (first, second and last of 5)
-
-
-
Impact of process parameters and heat treatment on fused filament fabricated PLA and PLA-CF
Authors (first, second and last of 4)
-
Design and Development of Low Density and Refractory Based on Ni-Ti-Al-Li-Si Pentanary Equiatomic High Entropy Alloys: Microstructure and Phase Analysis
Authors (first, second and last of 8)
-
Effectiveness prediction of CuO nanofluid heat pipe system using fuzzy neuro approach
Authors (first, second and last of 5)
-
-
Optimization of mechanical properties of high strength dual phase steel through thermo-mechanical simulation
Authors (first, second and last of 4)
-
Hot forming behaviour of tailor welded aluminium (AA6061- AA8011) alloy sheets using friction stir welding
Authors (first, second and last of 4)
-
-
Investigation of fracture forming limits of dual phase steel under warm incremental forming process
Authors (first, second and last of 4)
-
Design and heat transfer performance analysis of mini-channel heat sink with water, EG and EG20 based nanofluids-computational approach
Authors (first, second and last of 8)
-
Design, modeling and parametric optimization of WEDM of Inconel 690 using RSM-GRA approach
Authors (first, second and last of 5)
-
Numerical and experimental residual stress analysis of dissimilar metals of Inconel 718 and AISI 316 developed in GTAW process
Authors (first, second and last of 4)
-
-
Design and analysis of crack-tip fields in plastically compressible hardening solids under cyclic loading
Authors (first, second and last of 4)
-
Analysis and optimization in hard turning of titanium grade-I using grey relational analysis
Authors
-
Optimisation of cutting parameters during turning of 16MnCr5 steel using Taguchi technique
Authors (first, second and last of 9)
-
Experimental investigation and optimization of powder metallurgy processing parameters of Si3N4/HfC/MoS2 reinforced with Al 7075
Authors (first, second and last of 6)
-
Inverse method to find the friction factor in metal forming process based on asperity-based deformation
Authors (first, second and last of 4)
-
-
Computational modelling of tensile flow parameters for 2219Al alloys microalloyed with Cd
Authors (first, second and last of 5)
-
Applying ANN – PSO algorithm to maximize the compressive strength and split tensile strength of blended self curing concrete on the impact of supplementary cementitious materials
Authors (first, second and last of 6)
-
Computational characteristics of an exponentially functionally graded piezoelectric beam
Authors (first, second and last of 5)
-
Experimental investigation on tribological performance and development of wear prediction equation of aluminium composite at elevated temperatures
Authors (first, second and last of 5)
-
Modeling of viscosity of composite of TiO2–Al2O3 and ethylene glycol nanofluid by artificial neural network: experimental correlation
Authors (first, second and last of 6)
-
Finite element and numerical analysis for structural responses of natural fibre-based epoxy composites
Authors (first, second and last of 4)
-
-
