Collection
High Entropy Alloy and Bulk Metallic Glass Coatings
Special Issue published in April 2022, Vol. 31, No. 4 of Journal of Thermal Spray Technology
Editors
-
Andrew S.M. Ang
Swinburne University of Technology, Australia
-
B.S. Murty
Indian Institute of Technology, India
-
Jien-Wei Yeh
National Tsing Hua University, Taiwan
-
Paul Munroe
University of New South Wales, Australia
-
Christopher C. Berndt
Swinburne University of Technology, Australia
Articles (39 in this collection)
-
-
Assessment of CrFeCoNi and AlCrFeCoNi High-Entropy Alloys as Bond Coats for Thermal Barrier Coatings
Authors (first, second and last of 6)
-
Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying
Authors (first, second and last of 5)
-
Plasma Cladding Current Optimization of FeCoCrMn HEA Coating and the Effect of Shot Peening
Authors (first, second and last of 5)
-
Structure Evolution and Corrosion Performance of CoCrFeMnNi High Entropy Alloy Coatings Produced Via Plasma Spray and Cold Spray
Authors (first, second and last of 5)
-
An Overview of Thermally Sprayed Fe-Cr-Nb-B Metallic Glass Coatings: From the Alloy Development to the Coating’s Performance Against Corrosion and Wear
Authors (first, second and last of 5)
-
Microstructure, Mechanical and Wear Performance of Fe-Based Amorphous Coatings Fabricated by High Velocity Air-Fuel Spraying
Authors (first, second and last of 4)
-
Cold Spray Additive Manufacturing of CoCrFeNiMn High-Entropy Alloy: Process Development, Microstructure, and Mechanical Properties
Authors (first, second and last of 17)
-
An Assessment of the High-Temperature Oxidation Resistance of Selected Thermal Sprayed High Entropy Alloy Coatings
Authors (first, second and last of 4)
-
Influence of Microstructure Evolution on the Electrochemical Corrosion Behavior of (CoCrFeNi)94Ti1.5Al4.5 High Entropy Alloy Coatings
Authors (first, second and last of 6)
-
FeCoNiCu Alloys Obtained by Detonation Spraying and Spark Plasma Sintering of High-Energy Ball-Milled Powders
Authors (first, second and last of 9)
-
Cold Spray and Laser-Assisted Cold Spray of CrMnCoFeNi High Entropy Alloy Using Nitrogen as the Propelling Gas
Authors (first, second and last of 7)
-
Microstructural and Tribological Behavior of Thermal Spray CrMnFeCoNi High Entropy Alloy Coatings
Authors (first, second and last of 8)
-
Comparison of Microstructures and Selected Properties of Plasma-Sprayed Iron-Based Metallic Glass Coatings
Authors (first, second and last of 5)
-
Microstructure and High-Temperature Tribological Behavior of Plasma-Sprayed FeCoCrAlNi High Entropy Alloy Coatings Under Higher Load Condition
Authors (first, second and last of 6)
-
-
Comparison of the Deposition Process for Metallic and MG Coatings Using Cold Spraying
Authors (first, second and last of 5)
-
Microstructure and Mechanical Properties of the Plasma-Sprayed and Cold-Sprayed Al0.5CoCrFeNi2Ti0.5 High-Entropy Alloy Coatings
Authors (first, second and last of 4)
-
Effect of Nanostructure on Wear and Corrosion Behavior of HVAF-Sprayed Eutectic High-Entropy Alloy Coatings
Authors (first, second and last of 10)
-
Fabrication and Characterization of AlxFeMnNiCrCu0.5(x = 0.0; 0.5; 1.0) High-Entropy Alloy Coatings by Laser Cladding
Authors (first, second and last of 5)
-
Tailoring the Mechanical, Tribological and Corrosion Behavior of Fe-Based Metallic Glass Coating Synthesized Using Atmospheric Plasma Spraying
Authors (first, second and last of 7)
-
Laser Cladding Deposition of a Fe-based Metallic Glass on 304 Stainless Steel Substrates
Authors (first, second and last of 9)
-
Refractory High-Entropy Alloy Coatings for High-Temperature Aerospace and Energy Applications
Authors (first, second and last of 9)
-
-
Effect of Mechanical Alloying on the Microstructure of CoCrNiTiMox High Entropy Alloy
Authors (first, second and last of 4)
-
Microstructural, Mechanical and Wear Behavior of HVOF and Cold-Sprayed High-Entropy Alloys (HEAs) Coatings
Authors (first, second and last of 6)
-
-
Wear-Resistant Fe-Based Metallic Glass-Al2O3 Composite Coatings Produced by Detonation Spraying
Authors (first, second and last of 7)
-
Corrosion Resistance to Molten Zinc of a Novel FeB-10 Mo-12 Al0.25FeNiCoCr Cermet and Coating
Authors (first, second and last of 5)
-
Effects of Annealing on the Microstructures and Wear Resistance of CoCrFeNiMn High-Entropy Alloy Coatings
Authors (first, second and last of 6)
-
Microstructural Transformation and Tribological Properties of Laser-Cladded FeNiCoCrTi0.5-xNbC High-Entropy Alloy-Based Composite Coatings
Authors (first, second and last of 4)
-
Deposition of High-Entropy Alloy Coating by Cold Spray Combined with Laser Melting: Feasibility Tests
Authors (first, second and last of 4)
-
-
Salt Spray (Fog) Corrosion Behavior of Cold-Sprayed Aluminum Amorphous/Nanocrystalline Alloy Coating
Authors (first, second and last of 7)
-
Microstructure and Properties of Laser-cladded Fe50Mn30Co10Cr10 High Entropy Alloy Coatings
Authors (first, second and last of 6)
-
Influence of Aluminum and Molybdenum on the Microstructure and Corrosion Behavior of Thermally Sprayed High-Entropy Alloy Coatings
Authors (first, second and last of 5)
-
Evaluation of New High Entropy Alloy as Thermal Sprayed Bondcoat in Thermal Barrier Coatings
Authors (first, second and last of 5)
-
-
HVOF Processed CoCrFeMnNi High-entropy Alloy Coatings: A Combined Computational and Experimental Validation Approach
Authors (first, second and last of 4)
