Abstract
Sintering kinetics of the mechanically activated ZnO-TiO2 system was studied. Mixtures of ZnO and TiO2 powders were mechanically activated using a high-energy ball mill for different time intervals from 0 to 300 min. Formal phenomenological analyses were performed in order to describe the specimen’s behavior during isothermal sintering at 1100 °C. Non-isothermal sintering was investigated by dilatometer measurements up to 1100 °C with a constant heating rate. The Dorn method was applied in order to give information on the activation energy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
F.H. Dulin, D.E. Rase, J. Am. Soc. 43, 125 (1960)
O. Yamaguchi, M. Morimi, H. Kawabata, K. Shimizu, J. Am. Ceram. Soc. 70, c97 (1987)
B. Li, Z. Yue, L. Li, J. Zhou, Z. Gui, J. Mater. Sci. Mater. Electr. 13, 415 (2002)
J. Yang, J.H. Swisher, Mat. Charact. 37, 153 (1996)
P.K. Gallagher et al., Mater. Res. Bull. 9, 1345 (1974)
R.J.H. Voorhoeve et al., Science 195, 827 (1977)
H.T. Kim, Y.H. Kim, J.D. Byun, J. Korean Phys. Soc. 32, 159 (1998)
H.T. Kim, Y.H. Kim, J.D. Byun, J. Korean Phys. Soc. 32, 346 (1998)
A. Golovechanski, H.T. Kim, Y.H. Kim, J. Korean Phys. Soc. 32, 1167 (1998)
H.T. Kim, Y.D. Byun, Y.H. Kim, Mater. Res. Bull. 33, 963 (1998)
H.T. Kim, Y.D. Byun, Y.H. Kim, Mater. Res. Bull. 33, 975 (1998)
K. Wakino, T. Nishikawa, Y. Ishikawa, H. Tamura, Br. Ceram. Trans. J. 89, 39 (1990)
H. Mandai, Y. Sakabe, J.P. Canner, Ceram. Trans. 5, 313 (1990)
W.C. Burn, Porter. Ceram. Trans. 5, 375 (1990)
H. Mandai, K. Wakino, H. Okamura, J.P. Canner, Ceram. Trans. 5, 391 (1990)
H. Kagata, T. Inoue, J. Kato, I. Kameyama, T. Ishizaki, Ceram. Trans. 32, 81 (1993)
T. Negas, T. Yeagar, S. Bell, N. Coats, I. Minis, Am. Ceram. Soc. Bull. 72, 80 (1993)
Y.S. Chang, Y.H. Chang, I.G. Chen, G.J. Chen, Y.L. Chai, J. Cryst. Growth 243, 379 (2002)
V.D. Parvanova, S.K. Andreev, J. Mater. Sci. Mater. Electr. 13, 585 (2002)
S.K. Manik, P. Bose, S.K. Pradhan, Mater. Chem. and Phys. 82, 837 (2003)
U. Steinike, B. Wallis, Cryst. Res. Tech. 32, 187 (1997)
N. Obradovic, N. Labus, T. Sreckovic, D. Minic, M.M. Ristic, Sci. Sint. 37, 123 (2005)
N. Obradovic, Master thesis, Belgrade (2005)
N. Obradovic, N. Labus, T. Sreckovic, M.M. Ristic, Mat. Sci. Forum 518, 131 (2006)
N. Obradovic, N. Labus, T. Sreckovic, D. Minic, Nanosystems. Nanomater. Nanotechnol. 2, 461 (2006)
V.B. Reddy, S.P. Goel, P.N. Mehrotra, Mater. Chem. Phys. 10, 365 (1984)
N. Nikolic, Z. Marinkovic, T. Sreckovic, J. Mater. Sci. 39, 5239 (2004)
T. Sreckovic, N. Labus, N. Obradovic, Lj Zivkovic, Mater. Sci. Forum 453, 435 (2004)
N. Obradovic, N. Labus, T. Sreckovic, S. Stevanovic, Sci. Sint. 39, 127 (2007)
N. Obradovic, N. Labus, T. Sreckovic, M.M. Ristic, Mater. Sci. Forum 494, 411 (2005)
J.L. Woolfrey, M.J. Bannister, J. Am. Ceram. Soc. 55, 390 (1972)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Atlantis Press and the author(s)
About this paper
Cite this paper
Obradović, N. (2016). Sintering of Zinc-Titanate. In: Lee, W., Gadow, R., Mitic, V., Obradovic, N. (eds) Proceedings of the III Advanced Ceramics and Applications Conference. Atlantis Press, Paris. https://doi.org/10.2991/978-94-6239-157-4_22
Download citation
DOI: https://doi.org/10.2991/978-94-6239-157-4_22
Published:
Publisher Name: Atlantis Press, Paris
Print ISBN: 978-94-6239-156-7
Online ISBN: 978-94-6239-157-4
eBook Packages: EngineeringEngineering (R0)