Abstract
A seven degrees-of-freedom manipulator actuated by a tendon drive system has been developed. In order to reduce the weight and volume of the manipulator, each motor was installed on the base frame and the motor torque was transmitted to each joint through a tendon-pulley system. For the tendon drive mechanism, a coupled drive mechanism was introduced, which actuates the manipulator mechanism by controlling the tension of each tendon in the tendon networks designed with coupled tendon structures. In the developed system, eight tendons connected to eight direct-drive motors were used for a seven degrees-of-freedom manipulator. In this paper, the structure of the developed manipulator is first explained. Secondly, the tension based control method for the coupled tendon driven manipulator is formulated. Finally, through simple experiments using the manipulator, the effectiveness of the proposed structure and the control method were demonstrated.
Preview
Unable to display preview. Download preview PDF.
References
Morecki, A., Z. Busko, H. Gasztold, and K. Jaworek, "Synthesis and Control of the Anthropomorphic Two-handed Manipulator," Proc. 10th Int. Symposium on Industrial Robots, p.461, 1980.
Salisbury, J.K., "Kinematic and Force Analysis of Articulated Hands," in "Robot Hands and the Mechanics of Manipulation," Edited by M.T. Mason and J.K. Salisbury, MIT Press, p.1, 1985.
Jacobson, S.C., J.E. Wood, D.F. Knutti, and K.B. Biggers, "The Utah/MIT Dextrous Hand: Work in Progress," Int. J. Robotics Research, 3–4, p.21, 1985.
Salisbury, J.K., W. Townsend, B. Eberman, and D. DiPietro, "Preliminary Design of a Whole-Arm Manipulation System (WAMS)," Proc. IEEE Int. Conf. on Robotics and Automation, p.254, 1988.
Hirose, S., and S. Ma, "Coupled Tendon-Driven Multijoint Manipulator," Proc. IEEE Int. Conf. on Robotics and Automation, p.1268, 1991.
Kaneko, M., K. Yokoi, and K. Tanie, "On a New Torque Sensor for Tendon Drive Fingers," IEEE Trans. of Robotics and Automation, RA-6, No.4, p. 501, 1990.
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 1993 Springer-Verlag London Limited
About this paper
Cite this paper
Yokoi, K., Komoriya, K., Tanie, K. (1993). Development of a coupled tendon drive manipulator with seven degrees-of-freedom. In: Morecki, A., Bianchi, G., Jaworek, K. (eds) RoManSy 9. Lecture Notes in Control and Information Sciences, vol 187. Springer, Berlin, Heidelberg. https://doi.org/10.1007/BFb0031461
Download citation
DOI: https://doi.org/10.1007/BFb0031461
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-19834-5
Online ISBN: 978-3-540-39315-3
eBook Packages: Springer Book Archive