Abstract
When electronic equipment is cooled by air cooling technology, uniform air supply should be realized based on device temperature uniformity and temperature requirement. By analyzing the flow resistance and energy of the air supply pipeline, the mathematical model of uniform air supply pipeline is established, and the orifice area of the air supply pipeline is calculated theoretically to obtain the orifice size. According to the theoretical calculation of the size of the orifice, a simulation model is established to simulate the uniform air supply in the pipeline. Simulation results show that the maximum difference between simulation value and theoretical value of orifice flow is 3.4%, and the calculation model of uniform air supply is feasible and accurate, which can provide reference for uniform air supply design of similar pipelines.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Luo, Z.: A Study on thermal design technique for a ship-based phased array radar. Electro-Mech. Eng. 21(02), 18–21 (2005)
Guo, Z.Y., Wu, X.B.: Compressibility effect on the gas flow and heat transfer in a microtube. Int. J. Heat Mass Transf. 40(13), 3251–3254 (1997)
Wang, Y., Vafai, K.: Transient characterization of flat plate heat pipe during startup and shut down operation. Int. J. Heat Mass Transf. 43(15), 2641–2655 (2000)
Jing, G., Cai, W.J., Zhai, D.Q., Liu, S., Cui, C.: A model-based air balancing method of a ventilation system. Energy Build. 174, 506–512 (2018)
Yu, F.J., Zheng, X.L., Zang, J.B.: Calculation and optimization analysis of subway simulation for EMU air conditioning system. Refrigeration 37(03), 44–50 (2018)
Liu, Z.B.: Application research of fixed-point jet technology on electronic equipments cooling. Master’s thesis, Nanjing University of Aeronautics and Astronautics, Nanjing (2009)
Luo, P.G.: The design and research on heat-dissipating of electronic components in narrow and small channel. Master’s thesis, Nanjing University of Aeronautics and Astronautics, Nanjing (2009)
Qi, X.Q., Zhang, Z.B., Huang, H., Shi, M.: Calculation, verification, and evaluation of air supply duct with various configurations in artificial environment laboratory. J. Refrig. 39(03), 100–108 (2018)
Song, J.W., Liu, G.D., Li, L.: Research on a train air supply system and car indoor air distribution optimization. J. Qingdao Technol. Univ. 36(03), 72–78 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Science Press
About this paper
Cite this paper
Li, L., Zhang, X., Tang, M. (2020). Study on Uniform Air Supply Technology. In: Duan , B., Umeda, K., Hwang, W. (eds) Proceedings of the Seventh Asia International Symposium on Mechatronics. Lecture Notes in Electrical Engineering, vol 589. Springer, Singapore. https://doi.org/10.1007/978-981-32-9441-7_39
Download citation
DOI: https://doi.org/10.1007/978-981-32-9441-7_39
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9440-0
Online ISBN: 978-981-32-9441-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)