Abstract
MIG can deposit with a very high deposition rate but fails in realizing the fine features. The precise deposition of the laser cladding process makes it different from the others. Therefore, in future, MIG, TIG or laser cladding will be used as per the requirement. In this paper, retrofitment of an omnidirectional laser cladding system with a 4-axis CNC machine has been presented. This retrofitment is a challenging task as laser cladding system consists of several subsystems such as optical cladding head, laser power source, wire feeder, and external cooling unit. These subsystems need to be mechanically as well as electrically integrated with the CNC machine and its controller. Mechanical integration was achieved by mounting the cladding head on a retractable fixture, and electrical integration was achieved by providing extra relays in the CNC controller. The preliminary experiments were conducted to demonstrate the retrofitment and capability of the omnidirectional cladding.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sealy, M.P., Madireddy, G., Williams, R.E., Rao, P., Toursangsaraki, M.: Hybrid processes in additive manufacturing. J. Manuf. Sci. Eng. 140(6), 060801 (2018)
Song, Y.A., Park, S.: Experimental investigations into rapid prototyping of composites by novel hybrid deposition process. J. Mater. Process. Technol. 171(1), 35–40 (2006)
Xiong, X., Zhang, H., Wang, G.: Metal direct prototyping by using hybrid plasma deposition and milling. J. Mater. Process. Technol. 209(1), 124–130 (2009)
Karunakaran, K.P., Suryakumar, S., Pushpa, V., Akula, S.: Retrofitment of a CNC machine for hybrid layered manufacturing. Int. J. Adv. Manuf. Technol. 45(7–8), 690–703 (2009)
Kapil, S., Legesse, F., Kulkarni, P., Joshi, P., Desai, A., Karunakaran, K.P.: Hybrid-layered manufacturing using tungsten inert gas cladding. Prog. Addit. Manuf. 1(1–2), 79–91 (2016)
Frazier, W.E.: Metal additive manufacturing: a review. J. Mater. Eng. Perform. 23(6), 1917–1928 (2014)
Pajukoski, H., Näkki, J., Thieme, S., Tuominen, J., Nowotny, S., Vuoristo, P.: High performance corrosion resistant coatings by novel coaxial cold-and hot-wire laser cladding methods. J. Laser Appl. 28(1), 012011 (2016)
Kapil, S., Legesse, F., Kumar, R., Karunakaran, K.P.: Hybrid layered manufacturing of turbine blades. Mater. Today Proc. 4(8), 8837–8847 (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Negi, S., Kapil, S., Sharma, A., Choudhary, P., Bhargava, P., Karunakaran, K.P. (2020). Retrofitment of Laser Cladding System with CNC Machine for Hybrid Layer Manufacturing. In: Shunmugam, M., Kanthababu, M. (eds) Advances in Additive Manufacturing and Joining. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9433-2_4
Download citation
DOI: https://doi.org/10.1007/978-981-32-9433-2_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9432-5
Online ISBN: 978-981-32-9433-2
eBook Packages: EngineeringEngineering (R0)