Abstract
In this chapter, two main topics in product development of products from tropical natural fibre composites; product design and materials selection are discussed. Engineering design process is presented and the emphasis is on the total design. Conceptual design and detail design are key activities in design but only conceptual design is emphasized in this book. Design approach for natural fibre composites may be different from metals, conventional composites, polymer and ceramic. Various idea generation techniques are discussed. Concept evaluation techniques for tropical natural fibre composite product development were reviewed. Design for manufacture is briefly reviewed. Materials selection using various tools and techniques suitable selection of tropical natural fibre composite materials is finally presented. Topic of design of products from tropical natural fibre reinforced polymer composites is still new. A lot of areas within this topic that can be explored such as in the areas of design for manufacture of natural fibre composites, design analysis during conceptual and detail design of products from natural fibre composites, design for sustainability for natural fibre composites, mould flow analysis for natural fibre composites and design to cost for natural fibre composite products. All those topics were originally intended to included in this chapter but due to space constraints, they are proposed to be included in future publication.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ahmed, Ali, B.A., Sapuan, S.M., Zainudin, E.S., Othman, M.: Optimum materials selection using Analytical Hierarchy Process for polymer composites. In: Proceedings of the 2nd UPM-UniKL Symposium on Polymeric Materials 2013, Kuala Lumpur, 28th Feb 2013, pp. 76–81 (2013a)
Ahmed Ali, B.A., Sapuan, S.M., Zainudin, E.S., Othman, M.: Java based expert system for selection of natural fibre composite materials. J. Food Agric. Environ. 11, 1871–1877 (2013)
Ashby, M., Johnson, K.: Materials and Design: The Art and Science of Material Selection in Product Design. Elsevier Butterworth-Heinemann, Amsterdam (2002)
Ashby, M.F.: Materials Selection in Mechanical Design, 3rd edn. Elsevier Butterworth-Heinemann, Amsterdam (2005)
Bernert, W., Bulych, S., Cran, J., Agle, D., Henseleit, K., et al.: Steel Bumper Systems for Passenger Cars and Light Trucks, Revision number 3, American Iron and Steel Institute, 30 June. http://bumper.autosteel.org (2006)
Buzan, T.: How to Mind Map®. Thorsons, London (2002)
Cross, N.: Engineering Design Methods, Strategies for Product Design, 2nd edn. Wiley, Chichester (1994)
Davoodi, M.M., Sapuan, S.M., Ahmad, D., Aidy, A., Khalina, A., Jonoobi, M.: Concept selection of car bumper beam with developed hybrid bio-composite material. Mater. Des. 32, 4857–4865 (2011)
Davoodi, M.M.: Development of Thermoplastic Toughened Hybrid Kenaf/Glass Fibre-Reinforced Epoxy Composite for Automotive Bumper Beam, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2012)
Dieter, G.E.: Engineering Design: A Materials and Processing Approach, 3rd edn. McGraw-Hill, New York (2000)
Ermolaeva, N.S., Kaveline, K.G., Spoormaker, J.L.: Materials selection combined with optimal structural design: concept and some results. Mater. Des. 23, 459–470 (2002)
Ertas, A., Jones, J.C.: The Engineering Design Process, 2nd edn. Wiley, New York (1996)
Fairuz, A.M.: Development of Material Selection Expert System for Polymer-Based Composite Materials, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2011)
Fairuz, A.M., Sapuan, S.M., Zainudin, E.S.: prototype expert system for material selection of polymeric-based composites for small fishing boat components. J. Food Agric. Environ. 10, 1543–1549 (2012)
Gutteridge, P.A., Waterman, N.A.: Computer-aided materials selection. In: Bever, M.B. (ed.) Encyclopedia of Materials Science and Engineering, pp. 767–770. Pergamon Press, Oxford (1986)
Ham, K.W., Sapuan, S.M., Zuhri, M.Y.M., Baharuddin, B.T.H.T.: Development of computer casing using oil palm fibre reinforced epoxy composites. In: Proceedings of the 9th National Symposium on Polymeric Materials, 14–16 Dec 2009, Putrajaya, Malaysia (2009)
Hambali, A.: Selection of Conceptual Design using Analytical Hierarchical Process for Automotive Bumper Beam under Concurrent Engineering Environment, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2009)
Hwang, C., Yoon, K.: Multi Attribute Decision Making: Methods and Applications—A State-of-the-Art Survey. Springer, Berlin (1981)
Hyman, B.: Fundamentals of Engineering Design, 2nd edn. Pearson Education Inc., Upper Saddle River (1998)
Jahan, A., Ismail, M.Y., Sapuan, S.M., Mustapha, F.: Material screening and choosing methods—a review. Mater. Des. 31, 696–705 (2010)
Jahan, A.: Improving Multi-Criteria Decision Making Algorithm for Material Selection, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2010)
Khamis, M.I.H., Sapuan, S.M., Zainudin, E.S., Wirawan, R., Baharuddin, B.T.H.T.: Design and fabrication of chair from hybrid banana pseudo-stem/glass fibre reinforced polyester composite. In: Proceedings of the 9th National Symposium on Polymeric Materials, 14–16 Dec, Putrajaya, Malaysia (2009)
Mansor, M.R., Sapuan, S.M., Zainudin, E.S., Nuraini, A.A., Hambali, A.: Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design. Mater. Des. 51, 484–492 (2013)
Mansor, M.R., Sapuan, S.M., Zainudin, E.S., Nuraini, A.A., Hambali, A.: Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ–Morphological Chart-Analytic Hierarchy Process method. Mater. Des. 54, 473–482 (2014)
Mazani, N., Sapuan, S.M., Ishak, M.R., Sahari, J.: Design and fabrication of kenaf fibre reinforced unsaturated polyester composite shoe rack. In: Proceedings of the UPM-UniKL Symposium on Polymeric Materials and the 3rd Postgraduate Seminar on Natural Fibre Composite 2012, Alor Gajah, Melaka, 2nd Feb, pp. 106–111 (2012)
Mazumdar, S.K.: Composites Manufacturing: Materials, Product, and Process Engineering. CRC Press, Boca Raton (2002)
McBeath, S.: Competition Car Composites: A Practical Handbook. Haynes Publishing, Somerset (2000)
Miller, S.A., Lepech, M.D., Billington, S.L.: Application of multi-criteria material selection techniques to constituent refinement in biobased composites. Mater. Des. 52, 1043–1051 (2013)
Misri, S.: Design and Fabrication of Small Boat by Using Sugar Palm Fibre Reinforced Epoxy Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2011)
Misri, S., Sapuan, S.M., Ishak, M.R., Sahari, J., Haron, M.: Design and fabrication of sugar palm fibre reinforced unsaturated polyester composite table. In: Proceedings of the UPM-UniKL Symposium on Polymeric Materials and the 3rd Postgraduate Seminar on Natural Fibre Composite 2012, Alor Gajah, Melaka, 2nd Feb, pp. 36–43 (2012)
Misri, S., Leman, Z., Sapuan, S.M.: Total design of a small boat using woven glass- sugar palm fibre reinforced unsaturated polyester composite. In: Sapuan S.M. (ed.) Engineering Composites: Properties and Applications. UPM Press,Serdang, pp. 224–47 (2014)
Pahl, G., Beitz, W., Feldhusen, J., Grote, K.H.: Engineering Design: A systematic Approach, 3rd edn. Springer, London (2007)
Pugh, S.: Total Design, Integrated Methods for Successful Product Engineering. Addison-Wesley Publishers Ltd., Workingham (1991)
Saaty, T.L.: Fundamental of Decision Making and Priority: Theory with the Analytical Hierarchy Process. RWS Publications, Pittsburg (2000)
Sapuan, S.M.: A Concurrent Engineering Design System for Polymeric-Based Composite Automotive Components, Ph.D. Thesis, De Montfort University, Leicester, UK (1998)
Sapuan, S.M., Abdalla, H.S.: A prototype knowledge-based system for the material selection of polymeric-based composites for automotive components. Compos. A Appl. Sci. Manuf. 29A, 731–742 (1998)
Sapuan, S.M.: Design and fabrication of motorcycle pump from oil palm fibre reinforced epoxy composite. In: Presented at the 17th Symposium of Malaysian Chemical Engineers (SOMChE 2003), Penang, Malaysia, 29–30th Dec (2003)
Sapuan, S.M., Hassan, M.Y., Ismail, N., Johari, M.: Development of polymeric-based composite rehal. Al Nahdah Journal of RISEAP 22, 37–38 (2003)
Sapuan, S.M.: Concurrent design and manufacturing process of automotive composite components. Assembly Autom. 25, 146–152 (2005)
Sapuan, S.M., Maleque, M.A.: Design and fabrication of natural woven fabric reinforced epoxy composite for household telephone stand. Mater. Des. 26, 65–71 (2005)
Sapuan, S.M., Maleque, M.A., Hameedullah, M., Suddin, M.N., Ismail, N.: A note on the conceptual design of polymeric composite automotive bumper system. J. Mater. Process. Technol. 159, 145–151 (2005)
Sapuan, S.M., Harun, N., Abbas, K.A.: Design and fabrication of a multipurpose table using a composite of epoxy and banana pseudostem fibres. J. Trop. Agric. 45, 66–68 (2007)
Sapuan, S.M., Naqib, M.: Design and fabrication of unidirectional pseudo-stem banana fibre reinforced epoxy composite small book shelf. Mech. Eng. Res. J. 6, 1–7 (2008)
Sapuan, S.M.: Concurrent Engineering for Composites. UPM Press, Serdang, Selangor (2010)
Sapuan, S.M., Mujtaba, I.M.: Development of a prototype computational framework for selection of natural fiber-reinforced polymer composite materials using neural network. In: Sapuan, S.M., Mujtaba, I.M. (eds.) Composite Materials Technology: Neural Network Application, pp. 317–339. CRC Press, Boca Raton (2010)
Sapuan, S.M., Kho, J.Y., Zainudin, E.S., Leman, Z., Ahmed Ali, B.A., Hambali, A.: Material selection for natural fibre reinforced polymer composites using analytical hierarchy process. Ind. J. Eng. Mater. Sci. 18, 255–267 (2011)
Sapuan, S.M., Mun, N.K., Hambali, A., Lok, H.Y., Fairuz, A.M., Ishak, M.R.: Prototype expert system for material system of polymeric composite automotive dashboard. Int. J. Phys. Sci. 6, 5988–5995 (2011)
Sapuan, S.M., Mansor, M.R.: Concurrent engineering approach in the development of composite products: A review. Mater. Des. (in press) (2014)
Suddin, M.N.: Understanding the Nature of Specification Changes and Feedback to the Specification Development Process. Ph.D Thesis, Denmark Tekniske Universitet, Kgs. Lyngby, Denmark (2012)
Ulrich, K.T., Eppingher, S.D.: Product Design and Development, 3rd edn. McGraw-Hill, New York (2004)
Yahaya, R., Sapuan, S.M., Leman, Z., Zainudin, E.S.: Selection of natural fiber for hybrid laminated composite vehicle spall liners. In: Presented at International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E), Kuala Lumpur, 26–28 Nov, book of Abstract, pp. 77–78 (2013)
Yeoh, T.S., Yeoh, T.J., Song, C.L.: TRIZ: Systematic Innovation in Manufacturing. Firstfruits Publishing, Petaling Jaya (2009)
Wright, I.: Design Methods in Engineering and Product Design. McGraw Hill Publishing Company, Maidenhead (1998)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Salit, M.S. (2014). Design and Materials Selection of Tropical Natural Fibre Composites. In: Tropical Natural Fibre Composites. Engineering Materials. Springer, Singapore. https://doi.org/10.1007/978-981-287-155-8_5
Download citation
DOI: https://doi.org/10.1007/978-981-287-155-8_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-287-154-1
Online ISBN: 978-981-287-155-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)