Abstract
Aluminum alloy 6061 and aluminum alloy 7075 (or simply denoted as Al 6061 and Al 7075, respectively) are widely used in the field of aviation, automobiles, and marine due to their exceptional properties such as good strength, lightweight, and better corrosion. In this paper, Al 6061 and Al 7075 are used as base materials for reinforcement to further enhance their mechanical properties. Alumina, silicon carbide, boron carbide, and titanium oxide are used as reinforcement particles. The cross matrix composites of Al 6061 and Al 7075 are produced by the widely used stir casting method. The different weight percentages of reinforcement particles are used to prepare different composition of cross composites. The resultant composites are heat-treated in T6 condition and machined in the suitable dimension for testing. The mechanical characterization was carried out by performing hardness, tensile, and impact tests, and their results have been presented. Moreover, the comparison of mechanical properties of alloys Al 6061 and Al 7075 is also given; specifically, the tensile stress and impact value of Al 6061 are shown to be increased when the reinforcement particles are added comparing to Al 7075 cross composites.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wojciechowski, S., Talar, R., Zawadzki, P., Legutko, S., Maruda, R., & Prakash, C. (2020). Study on Technological Effects of a Precise Grooving of AlSi13MgCuNi Alloy with a Novel WCCo/PCD (DDCC) Inserts. Materials, 13(11), 2467.
Uddin, M., Basak, A., Pramanik, A., Singh, S., Krolczyk, G. M., & Prakash, C. (2018). Evaluating hole quality in drilling of Al 6061 alloys. Materials, 11(12), 2443.
Basak, A. K., Pramanik, A., & Prakash, C. (2019). Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression. Materials Science and Engineering: A, 763, 138141.
Singh, S., Prakash, C., Antil, P., Singh, R., Królczyk, G., & Pruncu, C. I. (2019). Dimensionless Analysis for Investigating the Quality Characteristics of Aluminium Matrix Composites Prepared through Fused Deposition Modelling Assisted Investment Casting. Materials, 12(12), 1907.
Prakash, C., Singh, S., Sharma, S., Garg, H., Singh, J., Kumar, H., & Singh, G. (2020). Fabrication of aluminium carbon nano tube silicon carbide particles based hybrid nano-composite by spark plasma sintering. Materials Today: Proceedings, 21, 1637–1642.
Raheja, G. S., Singh, S., & Prakash, C. (2020). Processing and characterization of Al5086-Gr-SiC hybrid surface composite using friction stir technique. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.04.729.
Boq-Kong, H., Su-Jien, L. & Min-Ten, J. (1996). The interfacial compounds and SEM fractography of squeeze-cast SiCp/6061 Al Composites. Materials Science and Engineering, A, 206, 110–119.
Hashim, J., Looney, L., & Hashmi, M. S. J. (1999). Metal matrix composites: production by the stir casting method. Journal of Materials Processing Technology, 92(93), 1–7.
Xua, H, Wangb, F., Zhub, J., & Xie, Y. (2011). Microstructure and mechanical properties of HoAl-Al2O3/Ti Al composite. Materials and Manufacturing Processes, 26(4), 559–561.
Uvaraja, V.C., & Natarajan, N. (2002) Comparison on Al 6061 and Al 7075 alloy with SiC and B4C reinforcement cross metal matrix composites. IJART, 2(2), 1–12. ISSN NO: 6602-3127.
Baradeswaran, A., et al. (2014). Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium cross composites. Materials and Design, 63, 620–632.
Prakash, C., Singh, S., Singh, M., Antil, P., Aliyu, A. A. A., Abdul-Rani, A. M., & Sidhu, S. S. (2018). Multi-objective Optimization of MWCNT Mixed Electric Discharge Machining of Al–30SiC p MMC Using Particle Swarm Optimization. In Futuristic Composites (pp. 145–164). Singapore: Springer.
Vijaya Ramnath, B., et al. (2014). Evaluation of mechanical properties of aluminium alloy–alumina–boron carbide metal matrix composites. Materials and Design, 58, 332–338.
Masjuki, Mohammad Tajally, & Zainul Huda, H. H. (2010). A comparative analysis of tensile and impact- toughness behavior of cold-worked and annealed 7075 aluminum alloy. International Journal of Impact Engineering, 37(4), 425–432.
Doel, T. J. A., & Bowen, P. (1996). Tensile properties of particulate-reinforced metal matrix composites. Composites Part A: Applied Science and Engineering, 27(8), 655–665.
Baradeswaran, A., & Elaya Perumal, A. (2014). Wear and mechanical characteristics of Al 7075/graphite composites. Composites Part B Engineering, 56, 472–476.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Balaji, R., Muruga Lal Jeyan, J.V., Basithrahman, A., Estheru Rani, T., Abirami, S. (2021). Comparative Analysis on Mechanical Properties of Al 6061 and Al 7075 Cross Matrix Composites. In: Prakash, C., Krolczyk, G., Singh, S., Pramanik, A. (eds) Advances in Metrology and Measurement of Engineering Surfaces . Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-5151-2_3
Download citation
DOI: https://doi.org/10.1007/978-981-15-5151-2_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-5150-5
Online ISBN: 978-981-15-5151-2
eBook Packages: EngineeringEngineering (R0)