Abstract
AISI 4340 has been widely used in automobile and aerospace industries due to their adequate mechanical and chemical properties. This paper investigated the effect of cutting parameters such as cutting speed, feed and depth of cut on cutting force and cutting temperature in dry turning of AISI 4340 hardened alloy steel with a multilayer coated carbide tool. The optimization of cutting conditions is highly important that helps the manufacturing technocrats in process planning as the economy of machining operation defines the competitive advantage. The study investigated the optimum cutting parameters that could produce a significant reduction in cutting temperature and cutting forces leading to improve tool life as well as the surface finish of the machined surface in hard turning. Taguchi’s L9 orthogonal array was used to design the experiment and analysis of variance (ANOVA) was performed to identify the significant factors affecting the cutting forces and cutting temperatures. The experimental results showed that the feed is the most influencing factor on cutting force and cutting temperature followed by the depth of cut and cutting speed.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Suresh R, Basavarajappa S, Gaitonde VN, Samuel GL (2012) Machinability investigations on hardened AISI 4340 steel using coated carbide insert. Int J Refract Metals Hard Mater 75–86
Das SR, Kumar A, Dhupal D, Mohapatra SK (2013) Optimization of surface roughness in hard turning of AISI 4340 steel using coated carbide inserts. Int J Inf Comput Technol 871–880
Aouici H, Yallese MA, Chaoui K (2012) Analysis of surface roughness and cutting force components in hard turning with CBN tool: prediction model and cutting conditions optimization. Measurement 344–353
Qasima A, Nisara S, Shaha A, Mohammed MSK, Sheikhb A (2015) Optimization of process parameters for machining of AISI-1045 steel using Taguchi design and ANOVA. Simul Model Pract Theory 36–51
Gupta MK, Sood PK (2015) Optimization of machining parameters for turning AISI 4340 steel using Taguchi based grey relational analysis. Indian J Eng Mater Sci 679–685
Das S, Mandal B (2016) Exploring machinability of AISI 4340 steel with coated carbide inserts. Adv Intell Syst Res 137:165–170
Singh P, Singh R (2014) Optimization of machining characteristics of D2 steel under different in turning conditions. Int J Innov Sci Eng Technol 219–223
Motorcu AR, Isik Y, Kus A, Cakir MC (2015) Analysis of the cutting temperature and surface roughness during the orthogonal machining of AISI 4140 Alloy Steel via the Taguchi method. Izvirni znanstveni lane 343–351
Aslan E, Camuşcu N, Birgören B (2007) Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Aluminum oxide + TiCN mixed ceramic tool. Mater Des 1618–1622
Bouacha K, Yallese MA, Mabrouki T, Rigal JF (2010) Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool. Int J Refract Metals Hard Mater 349–361
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Mane, S., Mishra, A., Kannawar, V. (2020). Optimization of Cutting Parameters in Dry Turning of AISI 4340 Hardened Alloy Steel with Multilayered Coated Carbide Tool. In: Vasudevan, H., Kottur, V., Raina, A. (eds) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4485-9_11
Download citation
DOI: https://doi.org/10.1007/978-981-15-4485-9_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-4484-2
Online ISBN: 978-981-15-4485-9
eBook Packages: EngineeringEngineering (R0)