Abstract
We investigated a packaging scheme for a singlemode-multimode-singlemode (SMS) optical fiber structure for a temperature sensor. The packaging material functions to protect the small and fragile sensor against the harsh environment as well as to increase the sensor sensitivity. Polytetrafluoroethylene (PTFE) material was chosen due to its excellent dielectric properties; hence the sensor applies to areas with electromagnetic interference. The effect of PTFE packaging is observed numerically and experimentally on a 43-mm multimode fiber-length SMS fiber sensor at the temperature range of 25–100℃. The temperature change causes thermal expansion of optical fiber and the packaging, therefore, induces changes in the optical power output of the sensor. The numerical calculation is based on modal propagation analysis of the light in the SMS fiber structure, while taken into consideration the coefficient of thermal expansion (CTE) of packaging material. The experiment includes the packaging in a rectangular shape, with 1, 2, 3, 5, 6, and 10-mm PTFE thickness, applied in single-sided design. Intensity-based interrogation method shows that the sensitivity of the sensor increases when PTFE packaging is applied, compared to the bare SMS fiber structure sensor.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Rao YJ, Huang S (2002) Applications of fiber optic sensors. In: Yu FT, Yin S (eds) Fiber optic sensors. Marcel Dekker Inc, New York, pp 449–490
Sabri N, Aljunid SA, Salim MS, Ahmad RB, Kamaruddin R (2013) Toward Optical Sensors: Review and Applications. J Phys: Conf Ser. no. 012064, p 423
Wang P, Zhao H, Wang X, Farrell G, Brambilla G (2018) A review of multimode interference in tapered optical fibers and related applications. Sensors 18(858):1–29
Li Y, Liu Z, Jian S (2014) Multimode interference refractive index sensor based on coreless fiber. Photonics Sens 4(1):21–27
Sari D, Hatta AM, Pratama DY (2016) Packaging aluminium impacting on optical fiber with SMS fiber structure
Waluyo TB, Bayuwati D (2016) An SMS (single mode—multi mode—single mode) fiber structure for vibration sensing. J Phys: Conf Ser 817(012035):1–6
Sun Y, Liu D, Lu P, Sun Q, Yang W, Wang S, Liu L, Zhang J (2017) Dual-Parameters optical fiber sensor with enhanced resolution using twisted MMF based on SMS structure. IEEE Sens J 17(10):3045–3051
Wu Q, Hatta AM, Wang P, Semenova Y, Farrell G (2011) Use of a bent single SMS fiber structure for simultaneous measurement of displacement and temperature sensing. IEEE Photonics Technol Lett 23(2):130–132
Lin YB, Chang KC, Chern JC, Wang LA (2005) Packaging methods of fiber-bragg grating sensors in civil structure applications. IEEE Sens J 5(3):419–423
Chotimah AK, Hatta AM, Pratama DY (2016) The effect of packaging material on optical fiber temperature sensor with singlemode multimode singlemode (SMS) structure
Zhang Y, Tian X, Xue L, Zhang Q, Yang L, Zhu B (2013) Super-high sensitivity of fiber temperature sensor based on leaky-mode bent SMS structure (2013). IEEE Photonics Technol Lett 25(6):560–563
Dreyer U, de Sousa KM, Somenzi J, de Lourenço I Jr, de Oliveira V, Kalinowski HJ (2013) A technique to package fiber bragg grating sensors for strain and temperature measurements. J Microwaves, Optoelectron Electromagnetic Appl 12(2):638–646
Zhang Y, Xue L, Wang T, Yang L, Zhu B, Zhang Q (2014) High performance temperature sensing of single mode-multimode-single mode fiber with thermo-optic polymer as cladding of multimode fiber segment. IEEE Sens J 14(4):1143–1147
Polyfluor Plastics BV PTFE (polytetrafluoroethylene). [Online]. Accessed 1 Oct 2018
Wang X, Lewis E, Wang P (2017) Investigation of the self-imaging position of a singlemode-multimode-singlemode optical fiber structure. Microwave Opt Technol Lett 59:1645–1651
Wang Q, Farrell G, Yan W (2008) Investigation on single-mode–multimode–single-mode fiber structure. J Lightwave Technol 26(5):512–519
Hatta AM, Indriawati K, Bestariyan T, Humada T, Sekartedjo (2013) SMS fiber structure for temperature measurement using an OTDR. Photonic Sens 3(3):262–266
Li E (2007) Temperature compensation of multimode interference-based fiber devices. Opt Lett 32(14):2064–2066
Li E, Peng G-D (2008) Wavelength-encoded fiber-optic temperature sensor with ultra-high sensitivity. Opt Commun 281:5768–5770
Wang W-H, Feng Y-J, Shi W-Q, Xiong Z-Y, Li S-D, Wu W, Lin J-X (2009) Analysis of packaging material impacting on FBG temperature. In: Proceedings of SPIE. Shanghai, China
Kirby RK (1956) Thermal expansion of polytetrafluoroethylene (Teflon) from −190 to +300 C. J Res Nat Bur Stan 57(2)
Tripathi SM, Kumar A, Varshney RK, Kumar YBP, Marin E, Meunier J-P (2009) Strain and temperature sensing characteristics of single-mode–multimode–single-mode structures. J Lightwave Technol 27(13):2348–2356
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Adiati, R.F., Hatta, A.M. (2020). Polytetrafluoroethylene-Packaged Singlemode-Multimode-Singlemode Fiber Structure for Temperature Sensor. In: Sabino, U., Imaduddin, F., Prabowo, A. (eds) Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4481-1_38
Download citation
DOI: https://doi.org/10.1007/978-981-15-4481-1_38
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-4480-4
Online ISBN: 978-981-15-4481-1
eBook Packages: EngineeringEngineering (R0)