Abstract
In the most recent three decades, many embed materials have been made of metals, compounds, earthenware production, polymers, and so forth. Most metals and earthenware production are a lot stiffer than bone tissue which can bring about mechanical bungle between the embed and the nearby bone tissue. Notwithstanding other biocompatibility issues, metals are excessively firm while pottery is excessively fragile and polymers are excessively adaptable and feeble to meet the mechanical quality. Thus, composites of polymers and inorganic materials may offer the ideal properties for embed materials. Polymers are well known because of their low thickness, great mechanical quality, and simple formability. At the point, when the composite is utilized as embed material, its development causes scraped spot at the joint. Henceforth, a study on scraped spot wear of composites is fundamental before utilizing it as embed material. In this work, two-body grating test has been completed on HAp-HDPE and HAp-UHMWPE bio-composites to ponder the impact of different test parameters on scraped spot wear. Fluffy derivation framework (FIS) and Artificial neural systems (ANNs) are utilized to foresee the wear qualities of composites. It has been seen that HAp-HDPE composite gives palatable outcomes contrasted with HAp-UHMWPE composite as far as grating wear test. The analysis results recommend that HAp-HDPE bio-composite has the potential for use as an elective material for burden-bearing orthopedic applications.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Roeder RK, Converse GL, Kane RJ, Yue W (2008) Hydroxyapatite-reinforced polymer biocomposites for synthetic bone substitutes. JOM 60(3):38–45
Jones MH, Scott D (eds) (1983) Industrial tribology: the practical aspects of friction, lubrication, and wear. Elsevier Scientific Publishing Company, New York
Garnett J, Dieppe P (1990) The effects of serum and human albumin on calcium hydroxyapatite crystal growth. J Biochem 266(3):863–868
Coombes AGA, Meikle MC (1994) Resorbable synthetic polymers as replacements for bone graft. J Clin Mater 17(1):35–67
Juang HY, Hon MH (1994) Fabrication and mechanical properties of hydroxyapatite-alumina composites. J Mater Sci Eng Part C 2(1–2):77–81
Sendemir A, Altintas S (1997) Production of HAp reinforced polymer composites for biomedical applications. In: Proceedings of the 2nd international conference biomedical engineering days, 5, pp. 114–117
Kannan S, Balamurugan A, Rajeswari S (2001) Bio-composites: a review of literature. Trends Biomater Artif Organs 14(2):30–36
Chattopadhyay R (2001) Surface wear—analysis, treatment, and prevention. ASM-International, OH, USA. ISBN 0-87170-702-0
Zhang Z, Friedrich K, Velten K (2002) Prediction on tribological properties of short fibrecomposites using artificial neural networks. Elsevier Wear 252:668–675
Pompe W, Worch H, Epple M, Friess W, Gelinsky M, Greil P, Hempel U, Scharnweber D, Schulte K (2003) Functionally graded materials for biomedical applications. J Mater Sci Eng Part A 362(1–2):40–60
Sousa RA, Reis RL, Cunha AM, Bevis MJ (2003) Coupling of HDPE/hydroxyapatite composites by silane-based methodologies. J Mater Sci Mater Med 14(8):475–487
Pramanik S, Agarwal AK, Rai KN (2005) Development of High strength Hydroxyapatite for hard tissue replacement. J Trends Biomater Artif Organs 19(1):46–51
Viswanath B, Ravishankar N, Nayar S, Sinha A (2005) Synthesis, Sintering and Micro structural characterization of nano crystalline Hydroxyapatite composites. Mater Res Soc Symp Proc 845(11–12):1–6
Lohfeld S, Barron V, Mc Hugh PE (2005) Bio-models of bone: a review. J Ann Biomed Eng 33(10):1295–1311
Jagur GJ (2006) Polymers for tissue engineering, medical devices, and regenerative medicine, Concise general review of recent studies. J Polym Adv Technol 17(6):395–418
De Xie Z, Qian D Huang, Abdi F (2006) Crack growth strategy in composites under static loading, Structures, structural dynamics, and materials conference. Am Inst Aeronaut Astronaut 5:1–8
Chowdhury AC, Kulkarni A Basak, Roy SK (2007) Wear characteristic and biocompatibility of some hydroxyapatite-collagen composite acetabular cups. J Wear 262(11–12):1387–1398
Kothamasu R, Haung SH (2007) Adaptive Mamdani fuzzy model for condition-based maintenance. Fuzzy Sets Syst 158:2715–2733
Tin-Oo MM, Gopalakrishnan V, Samsuddin AR, Al Salihi KA, Shamsuria O (2007) Antibacterial property of locally produced hydroxyapatite. Archives Orofacial Sci 2(11):41–44
Neuendorf RE, Saiz E, Tomsia AP, Ritchie RO (2008) Adhesion between biodegradable polymers and hydroxyapatite. J Acta Biomater 4(5):1288–1296
Huang AH, Farrell MJ, Kim M, Mauck RL (2010) Long-Term dynamic loading improves the mechanical properties of chondrogenicmesenchymal stem cell-Laden Hydrogels. J Euro Cells Mater 19(215):72–85
Eslami H, Solati-Hashjin M, Tahriri M, Bakhshi F (2010) Synthesis and characterization of nano crystalline HAp obtained by the wet chemical technique. J Mater Sci 28(1):5–13
Ren Q, Baron L, Balazinski M (2011) Type-2 fuzzy modelling for acoustic emission signal in precision manufacturing. Model Simul Eng 696947:1–12
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kumar, M.A. (2021). Evaluation of Two-Body Abrasive Wear Using FIS and ANN. In: Kalamkar, V., Monkova, K. (eds) Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-3639-7_17
Download citation
DOI: https://doi.org/10.1007/978-981-15-3639-7_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-3638-0
Online ISBN: 978-981-15-3639-7
eBook Packages: EngineeringEngineering (R0)