Abstract
The solid insulators are widely used in alternating current gas-insulated switchgear (GIS) equipment in high-speed railway traction substation. They have both mechanical support and electrical insulation functions. AC withstand voltage test is required before they are put into operation. In this paper, the series resonant circuit is theoretically analyzed, and the transient voltage change process of GIS solid insulators during sudden flashover is simulated and analyzed in the MATLAB/Simulink computing environment. The 3D electric field simulation of basin insulators and typical solid insulators with insulation support is carried out by using ANSYS electric field simulation platform. The withstand voltage test of the real interval of GIS is carried out to obtain the opening of circuit breaker. The relationship curves between Q, I and applied voltage U of solid insulator under two operating conditions are obtained. The results show that after flashover of solid insulators in series resonant circuit, the arc will be extinguished immediately after high voltage drop, and the recovery voltage will be established for a long time. The typical electric field distribution of solid insulators has concentrated area of local electric field, and flashover in field withstand voltage test starts in high field strength area. The research results of this paper provide some theoretical support for the field voltage withstand test of solid insulators used in AC GIS with series resonant circuit.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Jyothi NS, Ramu TS, Manoj M (2010) Temperature distribution in resin impregnated paper insulation for transformer bushings. IEEE Trans Dielectr Insul 7:931–938
Monga S, Gorur RS, Hansen P, Massey W (2006) Design optimization of high voltage bushing using electric field computations. IEEE Trans Dielectr Insul 13:1217–1224
Hesamzadeh MR, Hosseinzadeh N, Wolfs P (2008) An advanced optimal approach for high voltage AC bushing Design. IEEE Trans Dielectr Insul 15:461–466
Champion JV, Dodd SJ (2001) Inter-foil electrical breakdown in high voltage ERIP condenser bushings. In: 2001 IEEE 7th international conference on solid dielectrics, pp 329–332
Platek R, Sekula R, Lewandowski B (2010) Fluid influence on dynamic characteristics of transformer-bushing system using Fluid Structure Interaction (FSI) approach. IEEE Trans Dielectr Insul 17:408–416
Ko C, Zhang S (2009) Improved transient hot-spot temperature calculation method of high voltage bushings. IEEE Trans Power Deliv 24:1295–1301
Wang Q, Wang H, Peng Z, Liu P, Zhang T, Wei H (2017) 3-D coupled electromagnetic-fluid-thermal analysis of epoxy impregnated paper converter transformer bushings. IEEE Trans Dielectr Insul 24(1):630–638
Wang Q, Yang X, Tian H, Liu P, Peng Z (2017) A novel dissipating heat structure of converter transformer RIP bushings based on 3-D electromagnetic-fluid-thermal analysis. IEEE Trans Dielectr Electr Insul 24:1938–1946
Zhang S, Peng Z, Liu P (2014) Inner insulation structure optimization of UHV RIP oil-SF6 bushing using electro-thermal simulation and advanced equal margin design method. IEEE Trans Dielectr Electr Insul 21:1768–1777
Zhang S, Peng Z, Liu P, Li N (2015) Design and dielectric characteristics of 1100 kV UHVDC wall bushing in China. IEEE Trans Dielectr Electr Insul 22:409–419
Acknowledgements
The paper is supported by technology project Chongqing Research Program of Fundamental Science and Advanced Technology (cstc2018jcyjAX0486), and Science and Technology Project of Chongqing Power Company (2018 Science and Technology Project of Chongqing Power Company 4#).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zhang, S. (2020). E-Field Simulation and Voltage Withstand Test Analysis of Solid Insulators for AC GIS Used in High-Speed Railway Traction Substation. In: Jia, L., Qin, Y., Liu, B., Liu, Z., Diao, L., An, M. (eds) Proceedings of the 4th International Conference on Electrical and Information Technologies for Rail Transportation (EITRT) 2019. EITRT 2019. Lecture Notes in Electrical Engineering, vol 638. Springer, Singapore. https://doi.org/10.1007/978-981-15-2862-0_3
Download citation
DOI: https://doi.org/10.1007/978-981-15-2862-0_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2861-3
Online ISBN: 978-981-15-2862-0
eBook Packages: EngineeringEngineering (R0)