Abstract
Tool wear monitoring is an important task in a smart manufacturing industry. Detecting worn-out tools and replacing them in time can increase the efficiency significantly. Various sensors are being used in machine tools to integrate them into a smart manufacturing setup. Continuously decreasing the cost of the sensors is encouraging the use of low-cost indirect methods for the task. Using multiple sensors increases the precision of estimating tool health over the single sensor-based approach. Appropriate mathematical models relating tool wear parameters and sensors data can be used here, but machine learning models become more suitable in a large variety of applications over normal mathematical models. This paper proposes a methodology for multi-sensor-based indirect tool wear monitoring system and presents a comparison of accuracy among various machine learning models. Standard references are used to generate dummy training and testing data. Python is used to create and test the models. In the end, it has been found that Naïve Bayes and support vector machine algorithms are yielding up to 97% accuracy. This is the initial work in the development of an IoT enabled and fully automated manufacturing setup.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bernhard S (2002) On-line and indirect tool wear monitoring in turning with artificial neural networks: a review of more than a decade of research. J Mech Syst Signal Process 16:487–546
Sukhomay P, Stephan P, Burkhard H, Nico J, Surjya K (2011) Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties. J Intell Manuf 22(4):491–504
Muhammad R, Jaharah A, Mohd ZN, Haron CHC (2013) Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system. Appl Soft Comput 13(4):1960–1968
Mahardhika P, Eric D, Chow YL, Edwin L (2019) Metacognitive learning approach for online tool condition monitoring. J Intell Manuf 30(4):1717–1737
Dimla DE, Lister PM (2000) On-line metal cutting tool condition monitoring. I: force and vibration analyses. Int J Mach Tools Manuf 40:739–768
Tugrul O, Yigit K (2005) Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. Int J Mach Tools Manuf 45(4–5):467–479
Castejon M, Alegre E, Barreiro J, Hernandez LK (2007) On-line tool wear monitoring using geometric descriptors from digital images. Int J Mach Tools Manuf 47(12–13):1847–1853
Jurkovic J, Korosec M, Kopac J (2005) New approach in tool wear measuring technique using CCD vision system. Int J Mach Tools Manuf 45(9):1023–1030
Dan L, Mathew J (1990) Tool wear and failure monitoring techniques for turning—a review. Int J Mach Tools Manuf 30:579–598
Andrew KS, Daming L, Dragan B (2006) A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mech Syst Signal Process 20(7):1483–1510
Ghosha N, Ravib YB, Patrac A, Mukhopadhyayc S, Pauld S, Mohantyd AR, Chattopadhyayd AB (2007) Estimation of tool wear during CNC milling using neural network-based sensor fusion. J Mech Syst Signal Process 21:466–479
Pedregosa F, Varoquaux G, Gramfort A, Michel V, Thirion B, Grisel O, Blondel M, Prettenhofer P, Weiss R, Dubourg V, Vanderplas J, Passos A, Cournapeau D, Brucher M, Perrot M, Duchesnay E (2011) Scikit-learn: machine learning in python. J Mach Learn Res 12:2825–2830
CNC Mill Tool Wear-Kaggle. https://www.kaggle.com/shasun/tool-wear-detection-in-cnc-mill. Last accessed 10 Mar 2019
Acknowledgements
This research work is carried out with a financial grant of ICPS division of the Department of Science and Technology (DST), Government of India, Grant no: DST/ICPS/CPS-Individual/2018/769 (G), dated 18–12–2018.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Patel, Z.B., Muthuswamy, S. (2020). A Machine Learning Scheme for Tool Wear Monitoring and Replacement in IoT-Enabled Smart Manufacturing. In: Deepak, B., Parhi, D., Jena, P. (eds) Innovative Product Design and Intelligent Manufacturing Systems. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-2696-1_43
Download citation
DOI: https://doi.org/10.1007/978-981-15-2696-1_43
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2695-4
Online ISBN: 978-981-15-2696-1
eBook Packages: EngineeringEngineering (R0)