Abstract
Development of the color 3D printing technology has greatly expanded the application field of 3D printing although color performance of color 3D printing is not satisfied. The influencing factors of color reproduction in color 3D printing were studied in this paper. Firstly, the printing principle and relative merits of different color 3D printing technologies were compared and the 3D printing technology with the highest degree of color reduction was found. Then, this color 3D printing technology was used to study the influencing factors of color reproduction. By comparing different standard color blocks, it was found that the number of printing layers has the greatest influence on color reproduction in color 3D printing. The relationship curves of the number of printing layers, hue, brightness, saturation and chromatic aberration were obtained through experiments. This study can provide the best color reproduction scheme for the color 3D printing technology.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Li C, Xiao Y, Zhen L (2018) Design and realization of a support bracket for medical test tubes based on 3D printing. In: Advances in graphic communication, printing and packaging. Lecture notes in electrical engineering, vol 543, pp 513–520
Sahi SE, Jiang Y, Spence AD (2009) Oriented 3-D inkjet printing. Comput Aided Des Appl 6(3):399–406
Stanic M, Lozo B, Svetec DG (2012) Colorimetric properties and stability of 3D prints. Rapid Prototyp J 18(2):120–128
Sugavaneswaran M, Arumaikkannu G (2014) Modeling for randomly oriented multi material additive manufacturing component and its fabrication. Mater Des 54(4):779–785
Dimitrov D, Schreve K, Beer ND (2006) Advances in three dimensional printing-state of the art and future perspectives. Rapid Prototyp J 12(3):136–147
He L, Chen G (2015) Color 3D printing based on UV ink-jet technology. Packag Eng 36(9):134–138
Liu Y, Yao S, Jiao Y et al (2018) Improving the Surface coloring effect of 3D printing model based on UV ink-jet system. Packag Eng 39(5):196–202
Gibson I, Ming LW (2001) Colour RP. Rapid Prototyp J 7(4):212–216
Wang DX, Leng HW, Chen S (2007) Recent advances in colour rapid prototyping. Int J Precis Technol 1(1):133–138
Stanic M, Lozo B (2010) Color and permanence issues in 3D ink-jet printing. In: MIPRO 2010, Opatija, Croatia, pp 274–277
Zhang Y, Tong Y, Zhou K (2017) Coloring 3D printed surfaces by thermoforming. IEEE Trans Vis Comput Graph 23(8):1924–1935
Acknowledgements
This study is funded by (1) Lab of Green Platemaking and Standardization for Flexographic Printing, which is belonged to Key Laboratory of science and stander press and publication, State Administration of Press, Publication, Radio, Film and Television of the People’s Republic of China. (2) 2019 Professional Teaching Resource Construction Project- Digital Manufacturing and 3D Printing Technology, Shanghai Publishing and Printing College.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Li, C., Zheng, L., Xiao, Y. (2020). Study on the Influencing Factors of Color Reproduction in Color 3D Printing. In: Zhao, P., Ye, Z., Xu, M., Yang, L. (eds) Advanced Graphic Communication, Printing and Packaging Technology. Lecture Notes in Electrical Engineering, vol 600. Springer, Singapore. https://doi.org/10.1007/978-981-15-1864-5_22
Download citation
DOI: https://doi.org/10.1007/978-981-15-1864-5_22
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1863-8
Online ISBN: 978-981-15-1864-5
eBook Packages: EngineeringEngineering (R0)