Abstract
The paper discusses the specific features of the process for forming multicomponent wear-resistant nanostructures on the structural steel of 38X2MЮA grade using the method of electrospark alloying (ESA) in the course of simultaneously saturating the surface layers with carbon (carbonizing), sulfur (sulfidizing) and aluminum (aluminizing), which can be used to improve microhardness and wear resistance, prevent frictional seizure, increase resistance to atmospheric corrosion and, thus, protect the surfaces of the parts for compression joints against fretting corrosion. At processing steel using the ESA method by graphite electrode with the discharge energy of Wp = 0.13; 0.52 and 4.9 J and the productivity of 0.5–2.5 cm2/min, a consistent matter containing sulfur and an aluminum powder is applied to the surface of the part to be strengthened, and then, without waiting for the matter to dry, the alloying process is carried out, while the consistent matter with the content of the aluminum powder of not more than 56% is applied. There were conducted metallographic and durametric analyses of the surface layers of the structural steel after simultaneously aluminizing, sulfidizing, and carbonizing by the ESA method. It was shown that the layer structure consisted of three zones, namely, the white layer, the diffuse zone, and the base metal. While increasing the discharge energy, such surface layer qualitative parameters as thickness, microhardness, and continuity of the white layer as well as surface roughness thereof had been increasing. With increasing the discharge energy, the presence of the enhanced sulfur content in the coating had been increasing from 40 to 100 µm.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
M.S. Ostrovsky, in Collection of Scientific Reports (MSTU, Moscow, 2011), pp. 214–228
V.T., Lebed, A.A. Kulachenko, Progressive Technol. Syst. Mech. Eng. 28, 84 (2004)
L. Ropyak, I. Schuliar, O. Bohachenko, Influence of technological parameters of centrifugal reinforcement upon quality indicators of parts. Eastern-Eur. J. Enterp. Technol. 1(5), 53–62 (2016). https://doi.org/10.15587/1729-4061.2016.59850
P.V. Skigoev, A.D. Petrov, A.I. Karmanov, Surveys NIIINFORMTYaZhMASh 1, 67 (1967)
M.V. Gedeon, Research, Design Improvement, Testing and Implementation of Manufacturing and Restoring Technologies for Large Back-up Rolls (State Registrations Number 0185.0046681, Kramatorsk, 1988) (in Ukrainian)
V.M. Minko et al., in Proceeding of XIII International Scientific and Engineering Conference “HERVICON+PUMPS” (Sumu State University, Sumy, 2011)
A.N. Petukhov, J. Aerospace Eng. Technol. 7(15), 128 (2004)
A.M. Smyslov, K.S. Selivanov, Increasing Durability of Machine Parts Under Fretting Conditions (Gilem, Ufa, 2005)
I.M. Panova, A.D. Panov, Naukovedenie 9, 1 (2017)
I.F. Malitsky, E.V. Chernyatina, Mach. Eng. 13, 149 (2014)
A. Panda, K. Dyadyura, J. Valíček, M. Harničárová, J. Zajac, V. Modrák, I. Pandová, P. Vrábel, E. Nováková-Marcinčínová, Z. Pavelek, Manufacturing technology of composite materials—principles of modification of polymer composite materials technology based on polytetrafluoroethylene. Materials 10(377), 1–20 (2017). https://doi.org/10.3390/ma10040377
R.B. Waterhouse, Fretting—Corrosion (Mechanical Engineering, Leningrad, 1976)
O. Maksakova, S. Simoẽs, A. Pogrebnjak, O. Bondar, Y. Kravchenko, V. Beresnev, N. Erdybaeva, The influence of deposition conditions and bilayer thickness on physical-mechanical properties of CA-PVD multilayer ZrN/CrN coatings. Mater. Charact. 140, 189–196 (2018). https://doi.org/10.1016/j.matchar.2018.03.048
A.D. Pogrebnjak, V.M. Beresnev, O.V. Bondar, B.O. Postolnyi, K. Zaleski, E. Coy, S. Jurga, M.O. Lisovenko, P. Konarski, L. Rebouta, J.P. Araujo, Mater. Des. 153, 47 (2018)
V. Tarelnyk, V. Martsynkovskyy, Appl. Mech. Mater. 630, 397 (2014). http://doi.org/10.4028/www.scientific.net/AMM.630.397
V.B. Tarel’nik, V.S. Martsinkovskii, A.N. Zhukov, Chem. Petrol. Eng. 53, 266 (2017). https://doi.org/10.1007/s10556-017-0333-7
V. Martsinkovsky, V. Yurko, V. Tarelnik, Yu. Filonenko, Procedia Eng. 39, 157 (2012). https://doi.org/10.1016/j.proeng.2012.07.020
B. Antoszewski, V. Tarelnyk, Appl. Mech. Mater. 630, 301 (2014). http://doi.org/10.4028/www.scientific.net/AMM.630.301
A.D. Pogrebnjak, V.M. Beresnev, K.V. Smyrnova, Ya.O. Kravchenko, P.V. Zukowski, G.G. Bondarenko, Mater. Lett. 211, 316 (2018). https://doi.org/10.1016/j.matlet.2017.09.121
R.B. Waterhouse, P.Α. Brook, G.M. Lee, Wear 5, 235 (1962)
L.T. Balatsky, Strength of Compression Joints (Tehnika, Kiev, 1982)
B.R. Lazarenko, N.I. Lazarenko, Electrospark Processing of Conductive Materials (Izd. Academy of Sciences of the USSR, Moscow, 1968)
S.N. Khimukhin, K. Ri, EKh Ri, Structure and Properties of Metals and Alloys under Electrospark Effect (Pacific ocean State Univ. Pub, Khabarovsk, 2015)
Y.I. Mulin, A.D Verkhoturov, Electrospark Alloying of Working Surfaces of Tools and Machine Parts with Electrode Materials Obtained from Mineral Raw Materials (Dal’nauka, Vladivostok, 1999)
V.B. Tarelnyk, O.P. Gaponova, I.V. Konoplianchenko, M.Y. Dovzhyk, Metallofiz. Noveishie Tekhnol. 39, 363 (2017). https://doi.org/10.15407/mfint.39.03.0363
V.B. Tarel’nyk, O.P. Gaponova, Y.V. Konoplyanchenko, M.Y. Dovzhyk, Metallofiz. Noveishie Tekhnol. 38, 1611 (2016). https://doi.org/10.15407/mfint.38.12.1611
V. Tarelnyk, I. Konoplianchenko, N. Tarelnyk, A. Kozachenko, Mater. Sci. Forum 968, 131 (2019). http://doi.org/10.4028/www.scientific.net/MSF.968.131
V.B. Tarelnyk, O.P. Gaponova, I.V. Konoplianchenko, V.A. Herasymenko, N.S. Evtushenko, Metallofiz. Noveishie Tekhnol. 40, 235 (2018). https://doi.org/10.15407/mfint.40.02.0235
V.B. Tarel’nik, A.V. Paustovskii, Y.G. Tkachenko, V.S. MartsinkovskiiA. V. Belous, E.V. Konoplyanchenko, O.P. Gaponova, Surf. Eng. Appl. Electrochem. 54, 147 (2018). https://doi.org/10.3103/s106837551802014x
G.V. Kirik, O.P. Gaponova, V.B. Tarelnyk, O.M. Myslyvchenko, B. Antoszewski, Powder Metall. Met. C+ 56, 688 (2018). https://doi.org/10.1007/s11106-018-9944-6
V.D. Zozulya, E.L. Shvedkov, D.I. Rovinsky, E.D. Brown, Dictionary-Reference to Friction, Wear and Lubrication of Machine Parts, 2nd edn. (Sci. Dumka, Kiev, 1990)
N.E. Denisova, V.A. Shorin, I.N. Gontar, N.I. Volchihina, N.S. Shorina, Tribotehnicheskoe materialovedenie i tribotehnologiya (Tribotechnical Materials Science and Tribotechnology) (Penz. State University Publ, Penza, 2006)
N.I. Lazarenko, Electrospark Alloying of Metal Surfaces (Machine Eng, Moscow, 1976)
A.E. Gitlevich, V.V. Mikhailov, N.Ya. Parkanskii, V.M. Revutskii, Electrospark Alloying of Metal Surfaces (Shtintsa, Chisinau, 1985)
A.G. Shcherbinsky, SU Patent 139336, 30 Dec 1961
L. Ropyak, V. Ostapovych, Eastern-Eur. J. Enterp. Technol. 2(5), 50 (2016). https://doi.org/10.15587/1729-4061.2016.65719
M.A. Elizavetin, E.A. Satel, Technological Ways to Increase Durability of Machines (Mach. Eng, Moscow, 1969)
L.Y. Ropyak, I.P. Shatskyi, M.V. Makoviichuk, Metallofiz. Noveishie Tekhnol. 39(4), 517–524 (2017). https://doi.org/10.15407/mfint.39.04.0517
L.Y. Ropyak, I.P. Shatskyi, M.V. Makoviichuk, Metallofiz. Noveishie Tekhnol. 41(5), 647 (2019)
A.D. Pogrebnjak, V.I. Ivashchenko, P.L. Skrynskyy, O.V. Bondar, P. Konarski, K. Załęski, S. Jurga, E. Coy, Compos. Part B Eng. 142, 85 (2018)
A.D. Pogrebnjak, A.A. Bagdasaryan, A. Pshyk, K. Dyadyura, Usp. Phys. Nauk 60, 586 (2017)
S.A. Pyachin, A.A. Burkov, V.S. Komarova, J. Surf. Invest.: X-Ray, Synchrotron Neutron Tech. 6, 16–24 (2013). https://doi.org/10.1134/s1027451013030336
T.M. Radchenko, V.A. Tatarenko, H. Zapolsky, Solid State Phenom. 138, 283 (2008). http://doi.org/10.4028/www.scientific.net/SSP.138.283
S.N. Khimukhin, I.A. Astapov, M.A. Teslina et al., in Formation of heat-resistant coatings by method of electrospark alloying using Ni-Al intermetallic alloys. Paper presented at the 15th International Scientific—Practical Conference Technical Sciences—From Theory to Practice, SibAK, Novosibirsk, 12 Nov 2012
N.L. Golego, A.Y. Alyabyev, V.V. Shevel, Fretting Corrosion of Metals (Technika, Kiev, 1974)
M.S. Ostrovsky, Tribotechnical Bases for Providing Quality of Functioning of Mining Machines (MGI, Moscow, 1993)
A. Pogrebnjak, K. Smyrnova, O. Bondar, Coatings 9(3), 155 (2019)
L.S. Saakiyan, A.P. Efremov, L.Y. Ropyak, A.V. Gorbatskii, Sov. Mater. Sci. 23(3), 267 (1987)
L.S. Saakiyan, A.P. Efremov, L.Y. Ropyak, Prot. Met 25(2), 185 (1989)
A.D. Verkhoturov, I.S. Anfimov, Phys. Chem. Mater. Process. 3, 93 (1978)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Tarelnyk, V. et al. (2020). Application of Multicomponent Wear-Resistant Nanostructures Formed by Electrospark Allowing for Protecting Surfaces of Compression Joints Parts. In: Pogrebnjak, A., Bondar, O. (eds) Microstructure and Properties of Micro- and Nanoscale Materials, Films, and Coatings (NAP 2019). Springer Proceedings in Physics, vol 240. Springer, Singapore. https://doi.org/10.1007/978-981-15-1742-6_18
Download citation
DOI: https://doi.org/10.1007/978-981-15-1742-6_18
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1741-9
Online ISBN: 978-981-15-1742-6
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)