Abstract
Different techniques used to measure the hardness of the grinding wheel based on the grinding wheel surface of various grain sizes and the bond contents present in the wheel structure. Two different techniques are identified to accept entirely their capacity to differentiate the wheels of various commercial hardness. In production industries, hardness of the grinding wheels is one of the key parameters which shows its strength of the grinding wheel. During the operating condition (dynamic), is the first method to easily relate in the workshop, quite more complex to analyze. One more technique in research studies of grinding wheel hardness obtained through statistical analysis result. This research highlights the further improvement of hardness of grinding wheel by combining two different abrasive materials (Al2O3 with Boron nitride). By mixing these two abrasive materials with vitrified bonding system involves the adjustments in order to maintain grinding performance, mainly the wheel hardness, grain holding capability, cutting strength, and wheel safety during the machining. It is a major outcome on mixing proportion, mixing quality, stability, and skill to manage the wheel in its green state during the heat treatment, while the proper composition of the bonding material tends to influence the strength and hardness of the grinding wheel. The present work reports the influence of the hardness of the wheel in terms of improving the wear rate and durability and power consumed during the grinding operation which highly affects the grinding business. The final parts of this article give the improved hardness of the grinding wheel and combined grain topography, wheel morphology would represent a clear step development of grinding wheel technology and that each of value in its own sphere of application in grinding.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Odior AO, Oyawale FA (2010) Manufacture of abrasive grains from locally sourced raw materials in Nigeria. J Emerg Trends Eng Appl Sci 1(1): 40–47
Talab H, Marza M (2017) Study Some properties for manufactured grinding wheels by use different abrasive materials. Aust J Basic Appl Sci 11(2):50–58
Shankar U, Ramesh Babu N (2018) A model for predicting the geometry of crater on grinding wheel surface ablated with a single pulsed laser. Procedia Manuf 26:509–520
Babu NR, Radhakrishnan V, Murti YV (1989) Investigations on laser dressing of grinding wheels part I: preliminary study. J Eng Ind 111(3):244–252
Daire et al. High-hardness abrasive product based on alumna and aluminum oxycarbides and process for preparing same United State Patents [11], [19], [45]4,341,533 45 July 27, 1982
Narayanan KS, et al. (1988) Grinding wheel with combination of fused and sintered abrasive grits 18,11, Patent Number: 4,741,743 (45) Date of Patent: May 3, 1988
Vipin Gopana, Leo Dev Wins K (2016) Quantitative analysis of grinding wheel loading using image processing. Procedia Technol 25:885–891
Suya Prem Anand P, et al. (2017) Investigation on grindability of medical implant material using a silicon carbide wheel with different cooling conditions. Procedia Manuf 10:417–428
Annamalai VE, et al. (1993). Efficient grinding of Ce-TZP with SiC wheels. J Eur Ceram Soc 11:463–469
Odior O et al (2013) Theoretical considerations of machining with grinding wheels. Int J Eng Technol 2(2):126–133
Palmer J, Ghadbeigi H, Novovic D, Curtis D (2018) An experimental study of the effects of dressing parameters on the topography of grinding wheels during roller dressing. J Manuf Process 31:348–355
Klocke F, Linke B (2008) Mechanisms in the generation of grinding wheel topography by dressing. Prod Eng 2(2):157–163
Pulmer J, et al. (2018) The Influence of Abrasive Grit Morphology on Wheel Topography and Grinding Performance. In: 8th CIRP Conference on High Performance Cutting (HPC 2018), Procedia CIRP, vol 77, pp 239–242
Breidenstein B, Denkena B, Mörke T, Hockauf R (2016) Markierungsfreie Bauteilidentifikation, Submitted to wt-Werkstattstechnik online, vol. 6
Klocke F et al (2016) Approach of characterization of the grinding wheel topography as a contribution to the energy modelling of grinding processes. Procedia CIRP 46:631–635
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Shivashankara, Naik, R., Patil, M.G. (2020). Hardness Characteristics of Grinding Wheel Using Al2O3 with Boron Nitride. In: Narasimham, G., Babu, A., Reddy, S., Dhanasekaran, R. (eds) Recent Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1124-0_30
Download citation
DOI: https://doi.org/10.1007/978-981-15-1124-0_30
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1123-3
Online ISBN: 978-981-15-1124-0
eBook Packages: EngineeringEngineering (R0)