Abstract
The present work focuses on optimizing the newly designed ball burning tool using Taguchi analysis method experiment on traditional lathe machine with process parameters for burning. The test piece and ball materials used are Aluminum Alloy 5083 with different percentages of zirconium and high carbon chromium with 6 mm diameter. The levels of parameters of the input process parameters are selected on the basis of one element at a time of the experiment: burning feed, burning rate, and material composition. The response parameters are hardness and roughness of the surface. The main objective of this study is to compare surface roughness and surface hardness values on a workpiece of 100% aluminum alloy and aluminum (99%, 98%) with zirconium (+1%, +2%).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Jayakrishnan J, Suraj R Effect of roller burnishing process on tool steel material using Cnc lathe. J Des Manufact Technol 5:155–159
Rakic R, Rakic Z (2002) The Influence of the metal working fluids on machine tool failures, vol 252(5–6), pp 438–444
Banerjee S, Mithra S, Panja B Using Taguchi method. J Mech Civ Eng 13:46–50
Solanki RG, Patel KA, Dhruv RB Effect of burnishing system parameters on surface quality. IJEDR 4. ISSN: 2321-9939
Kumar P, Purohit GK Design and development of ball burnishing tool. J Eng Res Technol 6:733–738
Stalin B, Murugan C Evaluation of mechanical behavior of aluminium alloy boron carbide MMC. In: International conference on emerging engineering trends and science (ICEETS – 2016). ISSN: 2348-8360
Tripathi H, Pungotra H, Gandotra S, Beri N (2013) Experimental investigation into ball burnishing process of brass using Taguchi approach. J Sci Eng Res 4(8)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Jawahar, M., Suresh kumar, J., Srikiran, M., Ismail, S. (2020). Experimental Investigation of Ball Burnishing Process Parameters Optimization for Al 5083 Using Taguchi Method. In: Narasimham, G., Babu, A., Reddy, S., Dhanasekaran, R. (eds) Recent Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1124-0_17
Download citation
DOI: https://doi.org/10.1007/978-981-15-1124-0_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1123-3
Online ISBN: 978-981-15-1124-0
eBook Packages: EngineeringEngineering (R0)