Abstract
This paper presents a series of four-point bending tests of cold-rolled aluminium alloy 5052 Zee beams subjected to lateral buckling. Six Zee beams with three different lengths were selected for testing. A dual-actuator loading system was specifically designed to keep the load always in vertical direction and through the shear centre of the cross sections during testing. Lateral buckling failure modes were observed in long beams, while local-lateral interaction buckling was seen in short ones. The test results in this study will be used to calibrate the new proposed design guidelines for cold-rolled sections subjected to lateral buckling in an ongoing research project at the University of Sydney.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Szumigala, M. and Polus, L.: Application of Aluminium and Concrete Composite Structures. Precedia Engineering 108(61), 544-549 (2015).
Blue Scope Lysaghts: Permalite – Aluminium Roll-formed Purlin Solutions. Permalite Aluminium Building Solutions Pty Ltd, Eagle Farm Qld 4009, Australia (2015).
Su, M.N., Young, B. and Gardner, L.: Deformation-based design of aluminium alloy beams. Engineering Structures 80, 339-349 (2014).
Huynh, L.A.T., Pham C.H. and Rasmussen, K.J.R.: Mechanical properties of cold-rolled aluminium alloy 5052 channel sections. In: 8th International Conference Steel and Aluminium Structures, Hong Kong (2016).
Nguyen, V.V., Hancock, G.J. and Pham, C.H.: Development of the Thin-Wall-2 Program for buckling analysis of thin-walled sections under generalized loading. In: 8th International Conference on Advances in Steel Structures, Lisbon (2015).
Pham, N.H., Pham, C.H. and Rasmussen, K.J.R.: Experimental investigation of the member buckling of cold-rolled aluminium alloy 5052 Channel columns. In: 9th International Conference on Advances in Steel Structures, pp. 491-503, Hong Kong (2018).
AS/NZS 4600:2005: Cold-formed Steel Structures. Standards Australia, Sydney (2005).
Pham, N.H., Pham, C.H. and Rasmussen, K.J.R.: Member buckling tests on cold-rolled aluminium alloy Channel beams. In: 9th International Conference on Steel and Aluminium Structures, UK (2019).
Pham, N.H., Pham, C.H. and Rasmussen, K.J.R.: Incorporation of measured geometric imperfections into finite element models for cold-rolled aluminium sections. In: 4th Congres International de Geotechnique – Ouvrages – Structures, pp. 161-171, Ho Chi Minh city (2017).
Niu, S.: Interaction buckling of cold-formed stainless steel beams. PhD thesis, the University of Sydney (2014).
Acknowledgement
Funding provided by the Australian Research Council Linkage Research Grant LP140100563 between BlueScope Lysaght and the University of Sydney has been used to perform this research. The authors would like to thank Permalite Aluminum Building Solutions Pty Ltd for the supply of the test specimens and financial support for the project. The first author is sponsored by the scholarship provided by Australian Awards Scholarships (AAS) scheme from Australian Government.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Pham, N.H., Pham, C.H., Rasmussen, K.J.R. (2020). Lateral Buckling Tests of Cold-rolled Aluminium Alloy 5052 Zee Beams. In: Ha-Minh, C., Dao, D., Benboudjema, F., Derrible, S., Huynh, D., Tang, A. (eds) CIGOS 2019, Innovation for Sustainable Infrastructure. Lecture Notes in Civil Engineering, vol 54. Springer, Singapore. https://doi.org/10.1007/978-981-15-0802-8_40
Download citation
DOI: https://doi.org/10.1007/978-981-15-0802-8_40
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0801-1
Online ISBN: 978-981-15-0802-8
eBook Packages: EngineeringEngineering (R0)