Abstract
This paper analyzes the requirements of the high-voltage platform measuring system of the series compensation system. Through the analysis of the platform of series compensation system, this paper study’s the noise source and route of TA measuring system on the platform and puts forward a centralized TA measuring system. The system uses signal processing and photoelectric conversion module based on low-power CPLD and reliable redundant power supply. The module features in centralized TA measuring system are also introduced. The system was successfully applied in the Canadian series compensation project.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhou X (2008) Series compensation of power system. CEPP
Xia M, Huang Y, Wu J Development and current situation of substation automation system. J Beijing Jiaotong Univ
Zeng Y, Wang J (2005) Design and implementation of the control and protection system for 500 kV Hechi series compensation. Relay 33(10):75–78
Zhao S, Yu D, Li G (2002) Testing on secondary systems in Weixian series compensation station of Datong-Fangshan 500 kV double circuits. North China Electr Power (3):5–8
He E, Wu R, Li J, Li Y, Lu J (2008) Measures of anti-EMI in series compensation equipment. Relay 36(4):72–76
Zhu C, Feng Y, Liu G, Luo S, Wu Z, Wang D (2013) Application of electronic current transformer measuring system in series compensation system. Autom Electr Power Syst 37(13):132–135
Peng T, Xu L, Yin C, Li J, Luo S (2010) Development of HV Side power supply for electronic current transformer. Transformer 47(5):5–12
Qiu H, Li L, Duan X, Fan X Lu B (2006) Opt-electric transmission system of low power consumption for optically powered electronic current transformers. Autom Electr Power Syst 30(20):72–75
Li Z, Li G, Chen M, Liu Z, Li Y, Yu H, Li S (2012) Development of power supply for electronics on series capacitor platform as driven by current transformer. Power Syst Technol 36(12):195–199
Yin Z, Liu W, Qin S et al (2004) A new method for realizing interface of electronic transformer based on FPGA technology. Autom Electr Power Syst (14):93–96
Yuan Y, Bu Q, Bao Y et al (2009) Design and application of electronic transformer data analysis system. Autom Electr Power Syst 33(20):78–82
Wang P, Luo C, Zhang G (2006) Electronic current transformer based on low power current transformer. Autom Electr Power Syst 30(4):98–101
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zhu, Cy. et al. (2020). Design and Application of Centralized Instrument Transformer Measuring System in Series Compensation System. In: Xue, Y., Zheng, Y., Rahman, S. (eds) Proceedings of PURPLE MOUNTAIN FORUM 2019-International Forum on Smart Grid Protection and Control. PMF PMF 2019 2021. Lecture Notes in Electrical Engineering, vol 584. Springer, Singapore. https://doi.org/10.1007/978-981-13-9779-0_41
Download citation
DOI: https://doi.org/10.1007/978-981-13-9779-0_41
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-9778-3
Online ISBN: 978-981-13-9779-0
eBook Packages: EnergyEnergy (R0)