Abstract
This article investigate the influence of different sawing angle and different band saw cutting speed by measuring the sawing vibration, motor current and shear stress caused by sawing. The band saw carrier stand are the closest fixing parts of the sawing point, the sawing vibration is measured by the axis vector of the two adjustable band saw carrier stand, so that we can understand the main vibration behavior occurring during the sawing process. Motor is the heart of the band saw machine, more current is needed to drive when the sawing resistance is large, in case to ensure the smooth cutting process, motor current monitoring system is established to monitor the motor current. The load cell is buried in the feeding plate to measure the sawing load, the shear stress is obtained after conversion. This study is to find correlation between cutting rate, band saw speed, and cutting angle of the honeycomb structure on vibration, motor current and shear stress.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhang, J., Ashby, M.F.: J. Mech. Sci. 34(6), 475–489 (1992)
Lee, H.S., Hong, S.H., Lee, J.R., Kim, Y.K.: J. Mater. Sci. 37, 1265–1272 (2002)
Zhou, H., Ping, X., Xie, S., Feng, Z., Wang, D.: J. Compos. Struct. 185, 524–536 (2018)
Hu, X.P., Yu, B.H., Li, X.Y., Chen, N.C.: 1st Crip Conference on Composite Materials Parts Manufacturing, CRIP-CCMPM 2017 (2017)
Karakoç, A., Freund, J.: J. Compos. Struct. 94, 2017–2024 (2012)
Qiu, K., Ming, W., Shen, L., An, Q., Chen, M.: J. Compos. Struct. 164, 58–67 (2017)
Roark, R.J., Young, W.C.: Formulas for Stress and Strain. McGraw-Hill Kogakusha, Tokyo (1975)
Du, W.M.: Master thesis, National Formosa University (2018)
Wu, S.-H., Huang, M.-S., Jhou, C.-E., Wei, C.-C.: MATEC Web of Conferences, vol. 201, p. 01001 (2018)
Jhang Jian, L.-H.: Master thesis, National Formosa University (2017)
Zhang, J.-B.: Master thesis, National Formosa University (2015)
Acknowledgements
This research was undertaken at the Precision Machinery and Surface Science Laboratory of Department of Power Mechanical Engineering, National Formosa University. The authors gratefully acknowledge the support from the Ministry of Science and Technology (MOST 107-2221-E-150-015-).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Cheng, CA., Wei, CC. (2020). Study of Sawing Performance of Band Saw Machine on Honeycomb Structure Material. In: Jamaludin, Z., Ali Mokhtar, M.N. (eds) Intelligent Manufacturing and Mechatronics. SympoSIMM 2019. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-9539-0_31
Download citation
DOI: https://doi.org/10.1007/978-981-13-9539-0_31
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-9538-3
Online ISBN: 978-981-13-9539-0
eBook Packages: EngineeringEngineering (R0)