Abstract
Gas turbine design is a purposeful activity directed towards the goal of fulfilling the needs of aviation industry. Out of all the components in a gas turbine engine, particularly combustion systems are least amenable. The present chapter shows a design methodology for a “can type” combustor used in airborne engines. The idea is to provide information for producing design for gas turbine combustors such that air staging is required at various locations in the combustor. Various empirical relations were used in the design process. A suitable combustor configuration is selected by calculating the length and diameter of the combustor and the dimensions of the air admission holes at various locations, for secondary air, and quenching air. Pressure measurements were done at the combustor inlet (i.e., at quenching air inlet and primary inlet pipe), in-order to estimate the pressure loss coefficient of the combustion chamber.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- I.S.A:
-
International Standard Atmosphere
- \( \dot{m}_{3} \) :
-
Inlet air mass flow rate (unit: kg/s)
- \( \dot{m}_{\text{SW}} \) :
-
Mass flow rate through swirler (unit: kg/s)
- \( \dot{m}_{\text{ZP}} \) :
-
Mass flow rate in primary zone (unit: kg/s)
- \( \dot{m}_{\text{f}} \) :
-
Mass flow rate of fuel (unit: kg/s)
- \( \Delta P_{3 - 4} /P_{3} \) :
-
Combustor pressure loss
- \( \Delta P_{3 - 4} /q_{\text{ref}} \) :
-
Combustor pressure loss factor
- \( \frac{{\Delta P_{\text{SW}} }}{{{\text{q}}_{\text{ref}} }} \) :
-
Pressure loss across swirler
- \( \frac{{\Delta P_{h} }}{{P_{3} }} \) :
-
Pressure loss across holes
- \( A_{\text{ref}} \) :
-
Reference area (unit: m2)
- \( A_{\text{ft}} \) :
-
Cross sectional combustor area (unit: m2)
- \( A_{\text{sw}} \) :
-
Swirler area (unit: m2)
- A h :
-
Area of the hole (unit: m2)
- A an :
-
Area of the annulus (unit: m2)
- \( V_{c} \) :
-
Volume of the combustor (unit: m3)
- C f :
-
Flow coefficient
- C d :
-
Coefficient of discharge of the flow meter
- C v :
-
Coefficient of velocity due to vena-contracta
- \( C_{\text{dh}} \) :
-
Hole discharge coefficient
- \( D_{\text{ref}} \) :
-
Reference diameter (unit: m)
- \( D_{\text{ft}} \) :
-
Combustor diameter (unit: m)
- \( d_{\text{h}} \) :
-
Hole diameter (unit: m)
- \( K_{\text{SW}} \) :
-
Swirler concordance factor
- \( L_{\text{Dz}} \) :
-
Secondary zone length (unit: m)
- \( P_{3} \) :
-
Inlet pressure (unit: P)
- \( R_{a} \) :
-
Specific gas constant (unit: J/Kg−1 K−1)
- R :
-
Outer radius of the swirler (unit: m)
- r :
-
Inner radius of the swirler (unit: m)
- T 3 :
-
Inlet temperature (unit: K)
- T 4 :
-
Exit temperature (unit: K)
- T max :
-
Max exit temperature (unit: K)
- K :
-
Factor of pressure loss
- K1, K2, K3:
-
Empirical constants
- q ref :
-
Reference dynamic pressure (unit: kg/(m s2)
- TQ:
-
Temperature quality factor
- \( M_{c} \) :
-
Air velocity loading parameter
- LHV:
-
Lower heating value (KJ/Kg)
- \( N_{\text{h}} \) :
-
No. of holes
- \( \left( {F/A} \right)_{\text{act}} \) :
-
Fuel to air ratio actual
- \( \left( {F/A} \right)_{\text{St}} \) :
-
Fuel to air ratio stoichiometric
- \( \beta_{\text{SW}} \) :
-
Turning angle of the airflow (unit: °)
- \( \Omega _{c} \) :
-
Air loading parameter
- \( \Omega \) :
-
Non-dimensional efficiency parameter
- \( \phi_{\text{PZ}} \) :
-
Primary zone equivalence ratio
- \( \phi_{\text{global}} \) :
-
Global equivalence ratio
- α:
-
Orifice area ratio
- μ:
-
Bleed to orifice area ratio
References
Cavcar M (2000) The international standard atmosphere (ISA). Anadolu University Turkey
Talay TA (1975) Introduction to the aerodynamics of flight. National Aeronautics and Space Administration, vol NASA SP-36, pp 6–9, Washington, D.C.
Mark CP, Selwyn A (2016) Design and analysis of annular combustion chamber of a low bypass turbofan engine in a jet trainer aircraft. Propuls Power Res 5(2):97–107
Srinivasa SG, Murali Krishna MVS, Reddy DN (2013) Design and analysis of gas turbine combustion chamber for producer gas as working fuel. Int J Comput Eng Res 3(1):444–447
Saravanamuttoo H, Rogers G, Cohen H (1996) Gas turbine theory, 4th edn. LONGMAN group, p 455
Melconian JW, Modak (1985) Combustor’s design, Sawyer’s gas turbine engineering handbook: theory and design, vol 1. Turbomachinery International Publications, Connecticut
Lefebvre AH, Ballal DR (2010) Gas turbine combustion: alternative fuels and emissions
Kiameh P (2002) Gas turbine combustors, Power generation handbook, Chapter 12 McGraw Hill Professional, Technology & Engineering
Melconian JO (1980) The design and development of gas turbine combustors, Northern Research and Engineering Corporation, Massachusetts, Woburn, USA
Sampath P, Shum F (1985) Combustion performance of hydrogen in a small gas turbine combustor. Int J Hydrogen Energy 10(12):829–837
Ramraj SH, Sekher C, Srihari Dinesh Kumar J, Raut A, Kushari A (2017) Sensitivity analysis of inlet conditions on emissions for different biofuel blend. In: Proceeding of 1st national aerospace propulsion conference
Srihari Dinesh Kumar J, Mariappan S, Kushari A (2016) Spray dynamics in a swirling jet air-blast atomizer. In: ILASS—Asia, Department of Aerospace Engineering Indian Institute of Technology Kanpur
Beran M, Koranek M, Axelsson AL-UE (2014) US. Patent, vol 2, no 12
Lefebvre AH (1966) Theoretical aspects of gas turbine combustion performance, vol CoA NOTE N, no 163
Herbert MV (1961) A theoretical analysis of reaction rate controlled systems : part II. In: Eighth symposium on combustion, vol 8, no 1, pp 970–982
Knight HA, Walker RB (1957) The component pressure losses in combustion chambers
Kaddah KS (1964) Discharge coefficients and jet deflection angles for combustor liner air entry holes. Ph.D. Thesis, p 63, June
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Roshan, D.K., Burela, R.S., Kushari, A. (2020). Design Philosophy for a Laboratory Scale Gas Turbine Combustor. In: Gupta, A., De, A., Aggarwal, S., Kushari, A., Runchal, A. (eds) Innovations in Sustainable Energy and Cleaner Environment. Green Energy and Technology. Springer, Singapore. https://doi.org/10.1007/978-981-13-9012-8_14
Download citation
DOI: https://doi.org/10.1007/978-981-13-9012-8_14
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-9011-1
Online ISBN: 978-981-13-9012-8
eBook Packages: EnergyEnergy (R0)