Abstract
This paper deals with the distributed generation (DG) widely used in custom power devices. Nowadays, photovoltaic array has been utilized in distribution lines with many devices like DSTATCOM, DVR, UPQC and many more. In this paper, distributed static synchronous compensator (DSTATCOM) has been used with distributed generation solar PV array with MPPT technique. Perturbation and observation (P&O) algorithm has been used in MPPT (maximum power point tracking) technique for consuming maximum power from the solar power. Nonlinear loads on grid side have been connected and three-leg VSI has been used for compensation of power quality problems. The conventional form of control technique has been used for gate pulse generation of VSI. Synchronous reference frame (SRF) control technique has been used to get the signals for controlling the thyristors. The experimental results have been verified in MATLAB Simulink/Simpower environment.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
S.K. Khadem, M. Basu, M.F. Conlon, Power quality in grid connected renewable energy systems: Role of custom power devices, in Proceedings for the International Conference on Renewable Energies and Power Quality (ICREPQ’10), Granada, Spain, 23–35 Mar 2010
N. Hamrouni, M. Jraidi, A. Dhouib, A. Cherif, Design of a command scheme for grid connected PV systems using classical controllers. Electr. Power Syst. Res. 143, 503–512 (2017)
IEEE Recommended Practices and Requirements for Harmonics control in Electrical Power Systems. IEEESTD 519 (1992)
R.C. Dugan, M.F. McGranaghan, H.W. Beaty, Electric Power Systems Quality, 2nd edn. (McGraw Hill, New York, 2006)
B. Singh, A. Chandra, Kamal-Al-Haddad, Power Quality Problems and Mitigation Techniques (Wiley Publications, 2015)
K.R. Padiyar, FACTS Controllers in Power Transmission and Distribution (New Age International (P) Limited Publishers, New Delhi, 2007)
B. Singh, J. Solanki, A comparison of control algorithms for DSTATCOM. IEEE Trans. Ind. Electron. 56(7) (2009)
A. Banelji, S.K. Biswas, B. Singh, DSTATCOM control algorithms: A review. Int. J. Power Electron. Drive Syst. 2(3), 285–296 (2012)
K.-L. Areerak, K.-N. Areerak, The comparison study of harmonic detection methods for shunt active power filters. Int. J. Electr. Comput. Energetic Electron. Commun. Eng. 4(10) (2010)
J. Ahmed, Z. Salam, An improved perturb and observe (P&O) maximum power point tracking (MPPT) algorithm for higher efficiency. Appl. Energy 150, 97–108 (2015)
A. Rohani, M. Joorabian, Modeling and control of DSTATCOM using adaptive hysteresis band current controller in three-phase four wire Distribution systems, in The 5th Power Electronics, Drives Systems and Technologies Conference (PEDSTC 2014), Tehran, Iran, 5–6 Feb 2014
E. Latha Mercy, R. Karthic, S. Arumugan, A comparative performance analysis of four control algorithms for a three phase shunt active power filter. Int. J. Comput. Sci. Netw. Secur. 10(6) (2010)
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Anand, M., Kumar, A., Dev, R., Kumar, P. (2020). Integration of DSTATCOM and Distributed Generation with Nonlinear Loads. In: Maharatna, K., Kanjilal, M., Konar, S., Nandi, S., Das, K. (eds) Computational Advancement in Communication Circuits and Systems. Lecture Notes in Electrical Engineering, vol 575. Springer, Singapore. https://doi.org/10.1007/978-981-13-8687-9_2
Download citation
DOI: https://doi.org/10.1007/978-981-13-8687-9_2
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-8686-2
Online ISBN: 978-981-13-8687-9
eBook Packages: EngineeringEngineering (R0)