Abstract
After the centrifugal compressor balance disc is installed in the final stage impeller, the rotor system can be protected because the axial force of the rotor is offset by the axial thrust generated by the pressure difference between the two sides. The balance plate plays an important role in the safe operation of the centrifugal compressor rotor system, and its strength is the guarantee for the safe operation of the centrifugal compressor. In order to analyze the reliability of the balance disc, this paper uses the static finite element method to analyze its strength. Considering the influence of centrifugal force, the stress and strain distribution of the balance plate under different rotating speeds are obtained, which plays a certain reference role for the design of the balance plate. The stress and strain distribution of the balance disc under the single action of centrifugal force is studied, and the influence of rotating speed on the strength of the balance disc is obtained.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lin, Y.: Cause analysis and countermeasure of abnormal shutdown of centrifugal compressor for long distance natural gas pipeline. Pet. Chem. Equip. 20(6), 92–94 (2017)
Zhang, P., Yang, J.: Thermal performance failure and avoidance of reciprocating natural gas compressor. Petrochem. Chem. Ind. Stand. Qual. 1, 258 (2013)
Shi, W., Wei, Z.: Analysis of the generation and balance of the axial force of centrifugal rotating machinery. Chem. Eng. Equip. 12, 38–39 (2008)
Research on static and dynamic strength and aerodynamic load of multistage impeller rotor system of compressor. Northeastern University (2012)
Wang, D., He, J., Rui, M.: Research and discussion on some problems in static elastoplastic analysis. Build. Constr. 5, 96–99 (2007)
Zhang, X., Tang, Y., Li, H., et al.: Structural nonlinear simulation analysis and design based on ANSYS. Comb. Mach. Tools Autom. Mach. Technol. 10, 29–32 (2007)
Geng, K., Du, S., Tang, M., et al.: Virtual simulation analysis of translational piston air compressor. Mech. Des. Manuf. 11, 28–30 (2012)
Research on self-healing control of centrifugal compressor shaft displacement and improvement of sealing improvement and efficiency technology. Beijing University of Chemical Technology (2006)
Luo, Q., Si, D., Feng, J., et al.: Study on blade strength and vibration characteristics of centrifugal compressor based on fluid-structure coupling method. Veh. Engine 2, 51–54 (2012)
Wang, W., Gao, J., Li, S., et al.: Improvement of axial force regulation and balance plate sealing of centrifugal compressors. J. Fluid Mech. 34(7), 15–18 (2006)
Theoretical analysis and experimental study on the automatic balancing axial force of floating impeller. Lanzhou University of Technology (2008)
Research on static and dynamic strength and aerodynamic load of multistage impeller rotor system of compressor. Northeastern University (2012)
Acknowledgements
This paper is supported by SINOPEC Gas Company (No. 35150573-16-ZC0607-0001).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Li, Y., Qiu, Z., Zhang, Y., Ding, Z., Fan, L. (2020). Static Strength Analysis of Centrifugal Compressor Balance Plate Based on Finite Element Method. In: Wahab, M. (eds) Proceedings of the 13th International Conference on Damage Assessment of Structures. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-8331-1_41
Download citation
DOI: https://doi.org/10.1007/978-981-13-8331-1_41
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-8330-4
Online ISBN: 978-981-13-8331-1
eBook Packages: EngineeringEngineering (R0)