Abstract
The present study deals with evaluating the dispersion characteristics of red mud by adapting to chemical analysis methods. For this purpose, the leached aqueous solution has been extracted by suitably diluting the red mud particles with distilled water. The parameters like sodium absorption ratio (SAR) and exchangeable sodium percentage (ESP), which are strong indicators of flocculation or dispersion stability, pH, zeta potential and electrical conductivity, have been measured and employed to assess the dispersive nature of the red mud. The values of SAR and ESP are measured as 54.9% and 98.3%, respectively. The very high values of SAR and ESP demonstrate that the red mud tends to exhibit moderate to high dispersive behaviour. Usually, dispersive soils are not selected as a source material for the construction of earth structures, without adequately stabilizing or treating with chemical additives. As such, the results emphasize that there is a need for treating the red mud with additives like gypsum or alum for mitigating the dispersion behaviour, before its intended use.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aitchison G, Wood C (1965) Some interactions of compaction, permeability, and post-construction deflocculation affecting the probability of piping failure in small earth dams. In: Proceedings of the 6th international conference on soil mechanics and foundation engineering, Montreal, 8–15 September 1965
Bell FG, Maud R (1994) Dispersive soils: a review from a South African perspective. Q J Eng Geol Hydrogeol 27(3):195–210
Bhuvaneshwari S, Soundra B, Robinson RG, Gandhi SR (2007) Stabilization and microstructural modification of dispersive clayey soils. In: 1st international conference on soil and rock engineering, Sri Lankan Geotechnical Society, Colombo, Sri Lanka, 7–11 August 2007
Courtney R, Timpson J (2005) Reclamation of fine fraction bauxite processing residue (red mud) amended with coarse fraction residue and gypsum. Water Air Soil Pollut 164(1–4): 91–102
Gerber F, Harmse HM (1987) Proposed procedure for identification of dispersive soils by chemical testing: technical paper. Civ Eng South Afr 29(10):397–399
Gore MS (2015) Geotechnical characterization of bauxite residue (red mud). Dissertation, University of Texas at Austin
Grafe M, Power G, Klauber C (2011) Bauxite residue issues: III. Alkalinity and associated chemistry. Hydrometallurgy 108:60–79. https://doi.org/10.1016/j.hydromet.2011.02.004
Hardie M (2009) Dispersive soil and their management. Technical Reference Manual, Sustainable Land Use Department of Primary Industries and Water
Harmse HM, Gerber FA (1988) Proposed procedure for the identification of dispersive soils. In: International conference on case histories in geotechnical engineering, St. Louis, MO, 1–5 June 1988
Knodel PC (1991) Characteristics and problems of dispersive clay soils. US department of the interior. Bureau of Reclamation, Denver office, R91–09
Northcote KH, Srene J (1972) Australian soils with saline and sodic properties. CSIRO, Australia
Ouhadi VR, Goodarzi AR (2006) Assessment of the stability of a dispersive soil treated by alum. Eng Geol 85(1–2):91–101
Parameswaran TG, Sivapullaiah PV (2017) Influence of Sodium and Lithium monovalent cations on dispersivity of clay soil. J Mater Civ Eng 29(7):04017042. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001877
Premkumar S, Piratheepan J, Arulrajah A et al (2016) Experimental study on contact erosion failure in pavement embankment with dispersive clay. J Mater Civil Eng 28(4):04015179. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001452
Rao BH, Reddy NG (2017) Zeta potential and particle size characteristics of red mud waste. In: Sivakumar Babu G, Reddy K, De A, Datta M (eds) Geoenvironmental practices and sustainability. Developments in geotechnical engineering. Springer, Singapore, pp 69–89
Rengasamy P, Greene R, Ford G, Mehanni A (1984) Identification of dispersive behaviour and the management of red-brown earth. Soil Res 22(4):413–431
Rout S, Sahoo S, Das SK (2012) Utility of red mud as an embankment material. Int J Earth Sci Eng 5(6):1645–1651
Sherard JI, Dunnigan LP, Decher RS (1976) Identification and nature of dispersive soil. J Geotech Eng Div 102:287–301
Umesh T, Dinesh S, Sivapullaiah PV (2011) Characterization of dispersive soils. Mat Sci Appl 2(6):629–633. https://doi.org/10.4236/msa.2011.26085
Volk GM (1937) The method of determination of degree of dispersion of the clay fraction of soils as used in investigation of abnormal characteristics of soils in region eight of the soil conservation service. Soil Sci Soc Am J 2:561–565
Acknowledgements
The authors are grateful to Science and Engineering Research Board (SERB), Department of Science and Technology (DST), Government of India, for the financial support (Grant No.: SB/FTP/ETA-0297/2013) to carry out this research work.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Gangadhara Reddy, N., Hanumantha Rao, B., Reddy, K.R. (2019). Chemical Analysis Procedures for Determining the Dispersion Behaviour of Red Mud. In: Agnihotri, A., Reddy, K., Bansal, A. (eds) Recycled Waste Materials. Lecture Notes in Civil Engineering , vol 32. Springer, Singapore. https://doi.org/10.1007/978-981-13-7017-5_3
Download citation
DOI: https://doi.org/10.1007/978-981-13-7017-5_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-7016-8
Online ISBN: 978-981-13-7017-5
eBook Packages: EngineeringEngineering (R0)